This happen at a docked 64 bit Gentoo linux (hardened, but that's not the
culprit AFAICS) at a ThinkPad T440s. I attached the dmesg of both kernel
versions.
--
Toralf, pgp key: 872AE508 0076E94E
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.0.8-hardened (root@t44) (gcc version 4.8.4 (Gentoo Hardened
4.8.4 p1.6, pie-0.6.1) ) #1 SMP Mon Jul 13 11:24:54 CEST 2015
Command line: BOOT_IMAGE=/boot/vmlinuz-4.0.8-hardened root=/dev/sda3 ro init 3
vga=791
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ae114fff] usable
BIOS-e820: [mem 0x00000000ae115000-0x00000000bb84cfff] reserved
BIOS-e820: [mem 0x00000000bb84d000-0x00000000bb89cfff] ACPI NVS
BIOS-e820: [mem 0x00000000bb89d000-0x00000000bcc73fff] reserved
BIOS-e820: [mem 0x00000000bcc74000-0x00000000bce7efff] ACPI NVS
BIOS-e820: [mem 0x00000000bce7f000-0x00000000bcefefff] ACPI data
BIOS-e820: [mem 0x00000000bceff000-0x00000000bf9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000033e5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 20AQCTO1WW/20AQCTO1WW, BIOS GJET83WW (2.33 ) 03/09/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x33e600 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00BE000000 mask 7FFE000000 uncachable
2 base 00BD000000 mask 7FFF000000 uncachable
3 base 00BCF00000 mask 7FFFF00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: last_pfn = 0xae115 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01e5b000, 0x01e5bfff] PGTABLE
init_memory_mapping: [mem 0x33e400000-0x33e5fffff]
[mem 0x33e400000-0x33e5fffff] page 2M
BRK [0x01e5c000, 0x01e5cfff] PGTABLE
init_memory_mapping: [mem 0x320000000-0x33e3fffff]
[mem 0x320000000-0x33e3fffff] page 2M
init_memory_mapping: [mem 0x300000000-0x31fffffff]
[mem 0x300000000-0x31fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xae114fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xadffffff] page 2M
[mem 0xae000000-0xae114fff] page 4k
init_memory_mapping: [mem 0x100000000-0x2ffffffff]
[mem 0x100000000-0x2ffffffff] page 1G
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BCEFE170 0000E4 (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: FACP 0x00000000BCEF9000 00010C (v05 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: DSDT 0x00000000BCEE3000 010F2D (v01 LENOVO TP-GJ 00002330 INTL
20120711)
ACPI: FACS 0x00000000BCD7A000 000040
ACPI: DBGP 0x00000000BCEFC000 000034 (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: ECDT 0x00000000BCEFB000 000052 (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: HPET 0x00000000BCEF8000 000038 (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: APIC 0x00000000BCEF7000 000098 (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: MCFG 0x00000000BCEF6000 00003C (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: SSDT 0x00000000BCEF5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL
20120711)
ACPI: SSDT 0x00000000BCEF4000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL
20120711)
ACPI: SSDT 0x00000000BCEE2000 0009CB (v01 LENOVO SataAhci 00001000 INTL
20120711)
ACPI: SSDT 0x00000000BCEE1000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL
20120711)
ACPI: SSDT 0x00000000BCEE0000 0007F5 (v01 LENOVO Cpu0Ist 00003000 INTL
20120711)
ACPI: SSDT 0x00000000BCEDF000 000AD8 (v01 LENOVO CpuPm 00003000 INTL
20120711)
ACPI: SSDT 0x00000000BCEDD000 00125C (v01 LENOVO SaSsdt 00003000 INTL
20120711)
ACPI: SSDT 0x00000000BCEDC000 000379 (v01 LENOVO CppcTabl 00001000 INTL
20120711)
ACPI: PCCT 0x00000000BCEDB000 00006E (v05 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: SSDT 0x00000000BCEDA000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL
20120711)
ACPI: TCPA 0x00000000BCED9000 000032 (v02 PTL LENOVO 06040000 LNVO
00000001)
ACPI: UEFI 0x00000000BCED8000 000042 (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: MSDM 0x00000000BCCC2000 000055 (v03 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: ASF! 0x00000000BCEFD000 0000A5 (v32 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: BATB 0x00000000BCED7000 000046 (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: FPDT 0x00000000BCED6000 000064 (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: UEFI 0x00000000BCED5000 0002F6 (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: DMAR 0x00000000BCED4000 0000B0 (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea000cffffff] PMD ->
[ffff880332000000-ffff88033dbfffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000033e5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000ae114fff]
node 0: [mem 0x0000000100000000-0x000000033e5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000033e5fffff]
On node 0 totalpages: 3065521
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 11077 pages used for memmap
DMA32 zone: 708885 pages, LIFO batch:31
Normal zone: 36760 pages used for memmap
Normal zone: 2352640 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xbda00000-0xbf9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: 8 Processors exceeds NR_CPUS limit of 4
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xae115000-0xbb84cfff]
PM: Registered nosave memory: [mem 0xbb84d000-0xbb89cfff]
PM: Registered nosave memory: [mem 0xbb89d000-0xbcc73fff]
PM: Registered nosave memory: [mem 0xbcc74000-0xbce7efff]
PM: Registered nosave memory: [mem 0xbce7f000-0xbcefefff]
PM: Registered nosave memory: [mem 0xbceff000-0xbf9fffff]
PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88033e200000 s71144 r8192 d31256 u524288
pcpu-alloc: s71144 r8192 d31256 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3017599
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.0.8-hardened root=/dev/sda3 ro
init 3 vga=791
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
Memory: 11963424K/12262084K available (5766K kernel code, 658K rwdata, 2800K
rodata, 1312K init, 1068K bss, 298660K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
Additional per-CPU info printed with stalls.
NR_IRQS:4352 nr_irqs:728 16
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2494.151 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency..
4988.30 BogoMIPS (lpj=2494151)
pid_max: default: 32768 minimum: 501
ACPI: Core revision 20150204
ACPI: All ACPI Tables successfully acquired
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff81d48000 - ffffffff81d4f000)
ftrace: allocating 19342 entries in 76 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz (fam: 06, model: 45,
stepping: 01)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width
counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
#2
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
#3
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19953.20 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbb84d000-0xbb89cfff] (327680 bytes)
PM: Registering ACPI NVS region [mem 0xbcc74000-0xbce7efff] (2142208 bytes)
xor: automatically using best checksumming function:
avx : 15528.000 MB/sec
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base
0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
raid6: sse2x1 5773 MB/s
raid6: sse2x2 7167 MB/s
raid6: sse2x4 8390 MB/s
raid6: avx2x1 11125 MB/s
raid6: avx2x2 12750 MB/s
raid6: avx2x4 14992 MB/s
raid6: using algorithm avx2x4 (14992 MB/s)
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880330038000 000436 (v01 PmRef Cpu0Cst 00003001 INTL
20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880330038800 0005AA (v01 PmRef ApIst 00003000 INTL
20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880330026000 000119 (v01 PmRef ApCst 00003000 INTL
20120711)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_]
(20150204/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_]
(20150204/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and
report a bug
ACPI: Power Resource [PUBS] (on)
acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
ACPI: Power Resource [NVP3] (on)
ACPI: Power Resource [NVP2] (on)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support
[PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xe0630000-0xe0633fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xe0620000-0xe062ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xe0639000-0xe063901f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xe0600000-0xe061ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xe063e000-0xe063efff]
pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xe0634000-0xe0637fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:9c1a] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: Enabling MPC IRBNCE
pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.1: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: Enabling MPC IRBNCE
pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xe063d000-0xe063d3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7]
pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3]
pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1f.2: reg 0x24: [mem 0xe063c000-0xe063c7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xe0638000-0xe06380ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0500fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff]
pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xe0400000-0xe0401fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: Enabled 4 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x25, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
<giome...@linux.it>
PTP clock support registered
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xae115000-0xafffffff]
e820: reserve RAM buffer [mem 0x33e600000-0x33fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x1800-0x189f] could not be reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0880-0x08ff] has been reserved
system 00:01: [io 0x0900-0x097f] has been reserved
system 00:01: [io 0x0980-0x09ff] has been reserved
system 00:01: [io 0x0a00-0x0a7f] has been reserved
system 00:01: [io 0x0a80-0x0aff] has been reserved
system 00:01: [io 0x0b00-0x0b7f] has been reserved
system 00:01: [io 0x0b80-0x0bff] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1600-0x167f] has been reserved
system 00:01: [io 0x1640-0x165f] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs LEN0036 PNP0f13 (active)
pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
pnp: PnP ACPI: found 6 devices
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff window]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff]
pci_bus 0000:03: resource 1 [mem 0xe0400000-0xe04fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 7, 786432 bytes)
UDP-Lite hash table entries: 8192 (order: 7, 786432 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
dmar: RMRR base: 0x000000badca000 end: 0x000000bade0fff
dmar: RMRR base: 0x000000bd800000 end: 0x000000bf9fffff
DMAR: No ATSR found
IOMMU: dmar0 using Queued invalidation
IOMMU: dmar1 using Queued invalidation
IOMMU: Setting RMRR:
IOMMU: Setting identity map for device 0000:00:02.0 [0xbd800000 - 0xbf9fffff]
IOMMU: Setting identity map for device 0000:00:14.0 [0xbadca000 - 0xbade0fff]
IOMMU: Setting identity map for device 0000:00:1d.0 [0xbadca000 - 0xbade0fff]
IOMMU: Prepare 0-16MiB unity mapping for LPC
IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed
counters 655360 ms ovfl timer
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1438265529.268:1): initialized
page_owner is disabled
zpool: loaded
zbud: loaded
cryptomgr_test (37) used greatest stack depth: 14280 bytes left
cryptomgr_test (38) used greatest stack depth: 14200 bytes left
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm
sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
ata1: SATA max UDMA/133 abar m2048@0xe063c000 port 0xe063c100 irq 42
ata2: DUMMY
ata3: DUMMY
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 0 bytes nvram, hpet irqs
Intel P-state driver initializing.
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
Key type dns_resolver registered
registered taskstats version 1
Btrfs loaded
rtc_cmos 00:02: setting system clock to 2015-07-30 14:12:09 UTC (1438265529)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-10: INTEL SSDSC2BF240A5L, LTVi, max UDMA/133
ata1.00: 468862128 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BF24 LTVi PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
BTRFS: device fsid 3ac03d1d-c85f-4bf4-9c62-a0e05b23fa8d devid 1 transid 181972
/dev/root
BTRFS info (device sda3): disk space caching is enabled
BTRFS: detected SSD devices, enabling SSD mode
VFS: Mounted root (btrfs filesystem) readonly on device 0:14.
devtmpfs: mounted
Freeing unused kernel memory: 1312K (ffffffff81c00000 - ffffffff81d48000)
setfont (90) used greatest stack depth: 8 bytes left
systemd-udevd[294]: starting version 216
random: systemd-udevd urandom read with 12 bits of entropy available
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic
conservative mode
Linux agpgart interface v0.103
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (51 C)
rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 44
ACPI: AC Adapter [AC] (on-line)
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
[drm] Initialized drm 1.1.0 20060810
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS GJET83WW (2.33 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad T440s, model 20AQCTO1WW
thinkpad_acpi: Unsupported brightness interface, please contact
ibm-acpi-de...@lists.sourceforge.net
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control,
supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
ACPI: Battery Slot [BAT0] (battery present)
tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
ACPI: Battery Slot [BAT1] (battery present)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input3
wmi: Mapper loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
cfg80211: Calling CRDA to update world regulatory domain
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2014 Intel Corporation
iwlwifi 0000:03:00.0: loaded firmware version 25.15.12.0 op_mode iwlmvm
tpm_tis 00:05: TPM is disabled/deactivated (0x6)
iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
input: PC Speaker as /devices/platform/pcspkr/input/input4
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input5
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter
Oruba
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
tsc: Refined TSC clocksource calibration: 2494.226 MHz
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp),
(dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A,
2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A,
2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
systemd-udevd[312]: renamed network interface wlan0 to wlp3s0
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:f7:28:0e:15:45
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
snd_hda_intel: probe of 0000:00:03.0 failed with error -2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks
0x0000b810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.0.8-hardened xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.0.8-hardened xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xe063d000
e1000e 0000:00:19.0 enp0s25: renamed from eth0
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.0.8-hardened ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
sound hdaudioC0D0: autoconfig for ID 292: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
type:speaker
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Mic=0x1a
sound hdaudioC0D0: Internal Mic=0x12
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
[drm] Memory usable by graphics device = 2048M
[drm] VT-d active for gfx access
[drm] Replacing VGA console driver
systemd-udevd[312]: renamed network interface eth0 to enp0s25
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] DMAR active, disabling use of stolen memory
vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on minor 0
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
fbcon: inteldrmfb (fb0) is primary device
usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 2-3: New USB device found, idVendor=17ef, idProduct=1010
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Lenovo ThinkPad Dock
usb 2-3: Manufacturer: LENOVO
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
usb 1-3: new high-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=8087, idProduct=8000
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
usb 1-3: New USB device found, idVendor=17ef, idProduct=1010
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: Lenovo ThinkPad Dock
usb 1-3: Manufacturer: LENOVO
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4684]
psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1170..]
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps:
0xd001a3/0x940300/0x12e800, board id: 2962, fw id: 2560
psmouse serio1: synaptics: serio: Synaptics pass-through port at
isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input7
usb 1-3.1: new full-speed USB device number 3 using xhci_hcd
Switched to clocksource tsc
usb 1-3.1: New USB device found, idVendor=043d, idProduct=0078
usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.1: Product: Lexmark Z600 Series
usb 1-3.1: Manufacturer: Lexmark
usb 1-3.1: SerialNumber: 18K670127065550
usb 1-3.2: new high-speed USB device number 4 using xhci_hcd
usb 1-3.2: New USB device found, idVendor=0ccd, idProduct=00ab
usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.2: Product: Cinergy T XXS
usb 1-3.2: Manufacturer: TerraTec GmbH
usb 1-3.2: SerialNumber: 0000000001
usb 1-3.4: new high-speed USB device number 5 using xhci_hcd
Console: switching to colour frame buffer device 240x67
usb 1-3.4: New USB device found, idVendor=17ef, idProduct=100f
usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.4: Product: Lenovo ThinkPad Dock
usb 1-3.4: Manufacturer: Lenovo
usb 1-3.4: SerialNumber: Rev1.2
hub 1-3.4:1.0: USB hub found
hub 1-3.4:1.0: 3 ports detected
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
usblp 1-3.1:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2
vid 0x043D pid 0x0078
usbcore: registered new interface driver usblp
dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in cold state, will try
to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
usb 1-3.4.2: new high-speed USB device number 6 using xhci_hcd
usb 1-3.4.2: New USB device found, idVendor=05e3, idProduct=0608
usb 1-3.4.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-3.4.2: Product: USB2.0 Hub
hub 1-3.4.2:1.0: USB hub found
hub 1-3.4.2:1.0: 4 ports detected
dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Terratec Cinergy T USB XXS (HD)/ T3)
usb 1-3.4.2.3: new low-speed USB device number 7 using xhci_hcd
usb 1-3.4.2.3: New USB device found, idVendor=046d, idProduct=c062
usb 1-3.4.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.4.2.3: Product: USB Laser Mouse
usb 1-3.4.2.3: Manufacturer: Logitech
usb 1-3.4.2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80
microframes
usb 1-3.2: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
usb 1-3.4.2.4: new low-speed USB device number 8 using xhci_hcd
usb 1-3.4.2.4: New USB device found, idVendor=046a, idProduct=0023
usb 1-3.4.2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-3.4.2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80
microframes
usb 1-3.4.2.4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80
microframes
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Laser Mouse as
/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2.3/1-3.4.2.3:1.0/0003:046D:C062.0001/input/input12
hid-generic 0003:046D:C062.0001: input: USB HID v1.10 Mouse [Logitech USB
Laser Mouse] on usb-0000:00:14.0-3.4.2.3/input0
input: HID 046a:0023 as
/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2.4/1-3.4.2.4:1.0/0003:046A:0023.0002/input/input13
cherry 0003:046A:0023.0002: input: USB HID v1.11 Keyboard [HID 046a:0023] on
usb-0000:00:14.0-3.4.2.4/input0
input: HID 046a:0023 as
/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2.4/1-3.4.2.4:1.1/0003:046A:0023.0003/input/input14
DiB0070: successfully identified
cherry 0003:046A:0023.0003: input: USB HID v1.11 Device [HID 046a:0023] on
usb-0000:00:14.0-3.4.2.4/input1
Registered IR keymap rc-dib0700-rc5
input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/rc/rc0/input15
rc0: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/rc/rc0
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Terratec Cinergy T USB XXS (HD)/ T3 successfully initialized and
connected.
usbcore: registered new interface driver dvb_usb_dib0700
grsec: time set by /sbin/hwclock[hwclock:416] uid/euid:0/0 gid/egid:0/0,
parent /lib64/rc/sh/openrc-run.sh[openrc-run.sh:415] uid/euid:0/0 gid/egid:0/0
grsec: time set by /sbin/hwclock[hwclock:416] uid/euid:0/0 gid/egid:0/0,
parent /lib64/rc/sh/openrc-run.sh[openrc-run.sh:415] uid/euid:0/0 gid/egid:0/0
grsec: time set by /sbin/hwclock[hwclock:418] uid/euid:0/0 gid/egid:0/0,
parent /lib64/rc/sh/openrc-run.sh[openrc-run.sh:417] uid/euid:0/0 gid/egid:0/0
BTRFS info (device sda3): turning on discard
BTRFS info (device sda3): use spread ssd allocation scheme
BTRFS info (device sda3): disk space caching is enabled
microcode: Microcode Update Driver: v2.00 removed.
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
IPv6: ADDRCONF(NETDEV_UP): tap0: link is not ready
random: nonblocking pool is initialized
input: TPPS/2 IBM TrackPoint as
/devices/platform/i8042/serio1/serio2/input/input11
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update
your scripts to load br_netfilter if you need this.
device tap0 entered promiscuous mode
device br0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
NET: Registered protocol family 17
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
wlp3s0: authenticate with 08:96:d7:05:f9:2a
wlp3s0: send auth to 08:96:d7:05:f9:2a (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 08:96:d7:05:f9:2a (try 1/3)
wlp3s0: RX AssocResp from 08:96:d7:05:f9:2a (capab=0x431 status=0 aid=1)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp),
(dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A,
2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A,
2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
grsec: time set by /usr/sbin/ntpd[ntpd:2291] uid/euid:0/0 gid/egid:0/0, parent
/sbin/init[init:1] uid/euid:0/0 gid/egid:0/0
Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81a806c0)
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
dvb-usb: Terratec Cinergy T USB XXS (HD)/ T3 successfully deinitialized and
disconnected.
wlp3s0: deauthenticating from 08:96:d7:05:f9:2a by local choice (Reason:
3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
[drm:ffffffffc052b95a] *ERROR* Hangcheck timer elapsed... bsd ring idle
[drm:ffffffffc052b95a] *ERROR* Hangcheck timer elapsed... video enhancement
ring idle
PM: suspend of devices complete after 7834.818 msecs
PM: late suspend of devices complete after 16.964 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 13.371 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:02: Turning OFF
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.195 msecs
PM: early resume of devices complete after 5.957 msecs
rtc_cmos 00:02: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
tpm_tis 00:05: TPM is disabled/deactivated (0x6)
usb 2-3: reset SuperSpeed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4684]
psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1170..]
PM: resume of devices complete after 5156.533 msecs
Restarting tasks ...
usb 1-3: USB disconnect, device number 2
usb 1-3.1: USB disconnect, device number 3
usblp0: removed
usb 1-3.2: USB disconnect, device number 4
usb 1-3.4: USB disconnect, device number 5
usb 1-3.4.2: USB disconnect, device number 6
usb 1-3.4.2.3: USB disconnect, device number 7
usb 1-3.4.2.4: USB disconnect, device number 8
done.
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp),
(dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A,
2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A,
2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
usb 1-3: new high-speed USB device number 9 using xhci_hcd
usb 1-3: New USB device found, idVendor=17ef, idProduct=1010
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: Lenovo ThinkPad Dock
usb 1-3: Manufacturer: LENOVO
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
usb 1-3.1: new full-speed USB device number 10 using xhci_hcd
usb 1-3.1: New USB device found, idVendor=043d, idProduct=0078
usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.1: Product: Lexmark Z600 Series
usb 1-3.1: Manufacturer: Lexmark
usb 1-3.1: SerialNumber: 18K670127065550
usblp 1-3.1:1.0: usblp0: USB Bidirectional printer dev 10 if 0 alt 0 proto 2
vid 0x043D pid 0x0078
usb 1-3.2: new high-speed USB device number 11 using xhci_hcd
usb 1-3.2: New USB device found, idVendor=0ccd, idProduct=00ab
usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.2: Product: Cinergy T XXS
usb 1-3.2: Manufacturer: TerraTec GmbH
usb 1-3.2: SerialNumber: 0000000001
dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in cold state, will try
to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Terratec Cinergy T USB XXS (HD)/ T3)
usb 1-3.2: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
DiB0070: successfully identified
Registered IR keymap rc-dib0700-rc5
input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/rc/rc0/input16
rc0: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/rc/rc0
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Terratec Cinergy T USB XXS (HD)/ T3 successfully initialized and
connected.
usb 1-3.4: new high-speed USB device number 12 using xhci_hcd
usb 1-3.4: New USB device found, idVendor=17ef, idProduct=100f
usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.4: Product: Lenovo ThinkPad Dock
usb 1-3.4: Manufacturer: Lenovo
usb 1-3.4: SerialNumber: Rev1.2
hub 1-3.4:1.0: USB hub found
hub 1-3.4:1.0: 3 ports detected
usb 1-3.4.2: new high-speed USB device number 13 using xhci_hcd
usb 1-3.4.2: New USB device found, idVendor=05e3, idProduct=0608
usb 1-3.4.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-3.4.2: Product: USB2.0 Hub
hub 1-3.4.2:1.0: USB hub found
hub 1-3.4.2:1.0: 4 ports detected
usb 1-3.4.2.3: new low-speed USB device number 14 using xhci_hcd
usb 1-3.4.2.3: New USB device found, idVendor=046d, idProduct=c062
usb 1-3.4.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.4.2.3: Product: USB Laser Mouse
usb 1-3.4.2.3: Manufacturer: Logitech
usb 1-3.4.2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80
microframes
input: Logitech USB Laser Mouse as
/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2.3/1-3.4.2.3:1.0/0003:046D:C062.0004/input/input17
hid-generic 0003:046D:C062.0004: input: USB HID v1.10 Mouse [Logitech USB
Laser Mouse] on usb-0000:00:14.0-3.4.2.3/input0
usb 1-3.4.2.4: new low-speed USB device number 15 using xhci_hcd
usb 1-3.4.2.4: New USB device found, idVendor=046a, idProduct=0023
usb 1-3.4.2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-3.4.2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80
microframes
usb 1-3.4.2.4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80
microframes
input: HID 046a:0023 as
/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2.4/1-3.4.2.4:1.0/0003:046A:0023.0005/input/input18
cherry 0003:046A:0023.0005: input: USB HID v1.11 Keyboard [HID 046a:0023] on
usb-0000:00:14.0-3.4.2.4/input0
input: HID 046a:0023 as
/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2.4/1-3.4.2.4:1.1/0003:046A:0023.0006/input/input19
cherry 0003:046A:0023.0006: input: USB HID v1.11 Device [HID 046a:0023] on
usb-0000:00:14.0-3.4.2.4/input1
wlp3s0: authenticate with 08:96:d7:05:f9:2a
wlp3s0: send auth to 08:96:d7:05:f9:2a (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 08:96:d7:05:f9:2a (try 1/3)
wlp3s0: RX AssocResp from 08:96:d7:05:f9:2a (capab=0x431 status=0 aid=1)
wlp3s0: associated
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp),
(dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A,
2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A,
2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
grsec: denied resource overstep by requesting 69632 for RLIMIT_MEMLOCK against
limit 65536 for /usr/bin/kdeinit4[kded4:3250] uid/euid:1000/1000
gid/egid:1000/1000, parent /sbin/init[init:1] uid/euid:0/0 gid/egid:0/0
grsec: denied resource overstep by requesting 69632 for RLIMIT_MEMLOCK against
limit 65536 for /usr/bin/kdeinit4[kded4:3250] uid/euid:1000/1000
gid/egid:1000/1000, parent /sbin/init[init:1] uid/euid:0/0 gid/egid:0/0
grsec: denied resource overstep by requesting 69632 for RLIMIT_MEMLOCK against
limit 65536 for /usr/bin/knotify4[knotify4:3754] uid/euid:1000/1000
gid/egid:1000/1000, parent /sbin/init[init:1] uid/euid:0/0 gid/egid:0/0
grsec: denied resource overstep by requesting 69632 for RLIMIT_MEMLOCK against
limit 65536 for /usr/bin/kdeinit4[kded4:3250] uid/euid:1000/1000
gid/egid:1000/1000, parent /sbin/init[init:1] uid/euid:0/0 gid/egid:0/0
grsec: denied resource overstep by requesting 69632 for RLIMIT_MEMLOCK against
limit 65536 for /usr/bin/kdeinit4[kded4:3250] uid/euid:1000/1000
gid/egid:1000/1000, parent /sbin/init[init:1] uid/euid:0/0 gid/egid:0/0
snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #0.
Suggest a bigger bdl_pos_adj.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.1.4-hardened (root@t44) (gcc version 4.8.4 (Gentoo Hardened
4.8.4 p1.6, pie-0.6.1) ) #1 SMP Mon Aug 10 15:16:21 CEST 2015
Command line: BOOT_IMAGE=/boot/vmlinuz-4.1.4-hardened root=/dev/sda3 ro init 3
vga=791
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ae114fff] usable
BIOS-e820: [mem 0x00000000ae115000-0x00000000bb84cfff] reserved
BIOS-e820: [mem 0x00000000bb84d000-0x00000000bb89cfff] ACPI NVS
BIOS-e820: [mem 0x00000000bb89d000-0x00000000bcc73fff] reserved
BIOS-e820: [mem 0x00000000bcc74000-0x00000000bce7efff] ACPI NVS
BIOS-e820: [mem 0x00000000bce7f000-0x00000000bcefefff] ACPI data
BIOS-e820: [mem 0x00000000bceff000-0x00000000bf9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000033e5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 20AQCTO1WW/20AQCTO1WW, BIOS GJET83WW (2.33 ) 03/09/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x33e600 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00BE000000 mask 7FFE000000 uncachable
2 base 00BD000000 mask 7FFF000000 uncachable
3 base 00BCF00000 mask 7FFFF00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: last_pfn = 0xae115 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01e62000, 0x01e62fff] PGTABLE
init_memory_mapping: [mem 0x33e400000-0x33e5fffff]
[mem 0x33e400000-0x33e5fffff] page 2M
BRK [0x01e63000, 0x01e63fff] PGTABLE
init_memory_mapping: [mem 0x320000000-0x33e3fffff]
[mem 0x320000000-0x33e3fffff] page 2M
init_memory_mapping: [mem 0x300000000-0x31fffffff]
[mem 0x300000000-0x31fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xae114fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xadffffff] page 2M
[mem 0xae000000-0xae114fff] page 4k
init_memory_mapping: [mem 0x100000000-0x2ffffffff]
[mem 0x100000000-0x2ffffffff] page 1G
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BCEFE170 0000E4 (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: FACP 0x00000000BCEF9000 00010C (v05 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: DSDT 0x00000000BCEE3000 010F2D (v01 LENOVO TP-GJ 00002330 INTL
20120711)
ACPI: FACS 0x00000000BCD7A000 000040
ACPI: DBGP 0x00000000BCEFC000 000034 (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: ECDT 0x00000000BCEFB000 000052 (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: HPET 0x00000000BCEF8000 000038 (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: APIC 0x00000000BCEF7000 000098 (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: MCFG 0x00000000BCEF6000 00003C (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: SSDT 0x00000000BCEF5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL
20120711)
ACPI: SSDT 0x00000000BCEF4000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL
20120711)
ACPI: SSDT 0x00000000BCEE2000 0009CB (v01 LENOVO SataAhci 00001000 INTL
20120711)
ACPI: SSDT 0x00000000BCEE1000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL
20120711)
ACPI: SSDT 0x00000000BCEE0000 0007F5 (v01 LENOVO Cpu0Ist 00003000 INTL
20120711)
ACPI: SSDT 0x00000000BCEDF000 000AD8 (v01 LENOVO CpuPm 00003000 INTL
20120711)
ACPI: SSDT 0x00000000BCEDD000 00125C (v01 LENOVO SaSsdt 00003000 INTL
20120711)
ACPI: SSDT 0x00000000BCEDC000 000379 (v01 LENOVO CppcTabl 00001000 INTL
20120711)
ACPI: PCCT 0x00000000BCEDB000 00006E (v05 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: SSDT 0x00000000BCEDA000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL
20120711)
ACPI: TCPA 0x00000000BCED9000 000032 (v02 PTL LENOVO 06040000 LNVO
00000001)
ACPI: UEFI 0x00000000BCED8000 000042 (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: MSDM 0x00000000BCCC2000 000055 (v03 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: ASF! 0x00000000BCEFD000 0000A5 (v32 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: BATB 0x00000000BCED7000 000046 (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: FPDT 0x00000000BCED6000 000064 (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: UEFI 0x00000000BCED5000 0002F6 (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: DMAR 0x00000000BCED4000 0000B0 (v01 LENOVO TP-GJ 00002330 PTEC
00000002)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea000cffffff] PMD ->
[ffff880332000000-ffff88033dbfffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000033e5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000ae114fff]
node 0: [mem 0x0000000100000000-0x000000033e5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000033e5fffff]
On node 0 totalpages: 3065521
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 11077 pages used for memmap
DMA32 zone: 708885 pages, LIFO batch:31
Normal zone: 36760 pages used for memmap
Normal zone: 2352640 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xbda00000-0xbf9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: 8 Processors exceeds NR_CPUS limit of 4
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xae115000-0xbb84cfff]
PM: Registered nosave memory: [mem 0xbb84d000-0xbb89cfff]
PM: Registered nosave memory: [mem 0xbb89d000-0xbcc73fff]
PM: Registered nosave memory: [mem 0xbcc74000-0xbce7efff]
PM: Registered nosave memory: [mem 0xbce7f000-0xbcefefff]
PM: Registered nosave memory: [mem 0xbceff000-0xbf9fffff]
PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88033e200000 s80488 r8192 d30104 u524288
pcpu-alloc: s80488 r8192 d30104 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3017599
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.1.4-hardened root=/dev/sda3 ro
init 3 vga=791
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
Memory: 11963364K/12262084K available (5882K kernel code, 739K rwdata, 2752K
rodata, 1340K init, 1068K bss, 298720K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
Additional per-CPU info printed with stalls.
NR_IRQS:4352 nr_irqs:728 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:
133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2494.156 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency..
4988.31 BogoMIPS (lpj=2494156)
pid_max: default: 32768 minimum: 501
ACPI: Core revision 20150410
ACPI: All ACPI Tables successfully acquired
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff81d4f000 - ffffffff81d56000)
ftrace: allocating 19681 entries in 77 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz (fam: 06, model: 45,
stepping: 01)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width
counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
#2
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
#3
PAX: PCID detected
PAX: strong UDEREF enabled
PAX: INVPCID detected
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19953.24 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbb84d000-0xbb89cfff] (327680 bytes)
PM: Registering ACPI NVS region [mem 0xbcc74000-0xbce7efff] (2142208 bytes)
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:
1911260446275000 ns
xor: automatically using best checksumming function:
avx : 24580.000 MB/sec
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base
0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
raid6: sse2x1 gen() 5828 MB/s
raid6: sse2x1 xor() 4531 MB/s
raid6: sse2x2 gen() 7277 MB/s
raid6: sse2x2 xor() 4970 MB/s
raid6: sse2x4 gen() 8531 MB/s
raid6: sse2x4 xor() 6031 MB/s
raid6: avx2x1 gen() 11382 MB/s
raid6: avx2x2 gen() 13082 MB/s
raid6: avx2x4 gen() 15421 MB/s
raid6: using algorithm avx2x4 gen() 15421 MB/s
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
ACPI : EC: EC started
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880330018000 000436 (v01 PmRef Cpu0Cst 00003001 INTL
20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880330018800 0005AA (v01 PmRef ApIst 00003000 INTL
20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880330020000 000119 (v01 PmRef ApCst 00003000 INTL
20120711)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_]
(20150410/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_]
(20150410/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and
report a bug
ACPI: Power Resource [PUBS] (on)
acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
ACPI: Power Resource [NVP3] (on)
ACPI: Power Resource [NVP2] (on)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support
[PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xe0630000-0xe0633fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xe0620000-0xe062ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xe0639000-0xe063901f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xe0600000-0xe061ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xe063e000-0xe063efff]
pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xe0634000-0xe0637fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:9c1a] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: Enabling MPC IRBNCE
pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.1: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: Enabling MPC IRBNCE
pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xe063d000-0xe063d3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7]
pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3]
pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1f.2: reg 0x24: [mem 0xe063c000-0xe063c7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xe0638000-0xe06380ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0500fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff]
pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xe0400000-0xe0401fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: Enabled 4 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x25, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
<giome...@linux.it>
PTP clock support registered
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xae115000-0xafffffff]
e820: reserve RAM buffer [mem 0x33e600000-0x33fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x1800-0x189f] could not be reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0880-0x08ff] has been reserved
system 00:01: [io 0x0900-0x097f] has been reserved
system 00:01: [io 0x0980-0x09ff] has been reserved
system 00:01: [io 0x0a00-0x0a7f] has been reserved
system 00:01: [io 0x0a80-0x0aff] has been reserved
system 00:01: [io 0x0b00-0x0b7f] has been reserved
system 00:01: [io 0x0b80-0x0bff] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1600-0x167f] has been reserved
system 00:01: [io 0x1640-0x165f] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs LEN0036 PNP0f13 (active)
pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
pnp: PnP ACPI: found 6 devices
clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns:
2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff window]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff]
pci_bus 0000:03: resource 1 [mem 0xe0400000-0xe04fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 7, 786432 bytes)
UDP-Lite hash table entries: 8192 (order: 7, 786432 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
dmar: RMRR base: 0x000000badca000 end: 0x000000bade0fff
dmar: RMRR base: 0x000000bd800000 end: 0x000000bf9fffff
DMAR: No ATSR found
IOMMU: dmar0 using Queued invalidation
IOMMU: dmar1 using Queued invalidation
IOMMU: Setting RMRR:
IOMMU: Setting identity map for device 0000:00:02.0 [0xbd800000 - 0xbf9fffff]
IOMMU: Setting identity map for device 0000:00:14.0 [0xbadca000 - 0xbade0fff]
IOMMU: Setting identity map for device 0000:00:1d.0 [0xbadca000 - 0xbade0fff]
IOMMU: Prepare 0-16MiB unity mapping for LPC
IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl
timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-14 Joules
hw unit of domain pp1-gpu 2^-14 Joules
resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans
more than pnp 00:01 [mem 0xfed10000-0xfed13fff]
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1 at arch/x86/mm/ioremap.c:191
__ioremap_caller+0x23c/0x3a0()
Info: mapping multiple BARs. Your kernel is fine.
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.1.4-hardened #1
Hardware name: LENOVO 20AQCTO1WW/20AQCTO1WW, BIOS GJET83WW (2.33 ) 03/09/2015
ffffffff810e2b30 0000000000000000 ffffffff817b4360 ffffc9000001bae8
ffffffff815b3597 0000000000002b2b ffffc9000001bb38 ffffc9000001bb28
ffffffff8105e0a6 ffffc9000001bb68 ffffffff817b4360 00000000000000bf
Call Trace:
[<ffffffff810e2b30>] ? print_modules+0x70/0xd0
[<ffffffff815b3597>] dump_stack+0x45/0x5d
[<ffffffff8105e0a6>] warn_slowpath_common+0x86/0xd0
[<ffffffff8105e14a>] warn_slowpath_fmt+0x5a/0x70
[<ffffffff8104a4bc>] __ioremap_caller+0x23c/0x3a0
[<ffffffff8102ae86>] ? snb_uncore_imc_init_box+0x66/0xa0
[<ffffffff8104a646>] ioremap_nocache+0x26/0x40
[<ffffffff8102ae86>] snb_uncore_imc_init_box+0x66/0xa0
[<ffffffff8102907c>] uncore_pci_probe+0xdc/0x1f0
[<ffffffff81387c28>] pci_device_probe+0xa8/0x110
[<ffffffff8141ca16>] driver_probe_device+0x176/0x2f0
[<ffffffff8141cbf0>] ? __device_attach+0x60/0x60
[<ffffffff8141cc9b>] __driver_attach+0xab/0xb0
[<ffffffff8141cbf0>] ? __device_attach+0x60/0x60
[<ffffffff8141cbf0>] ? __device_attach+0x60/0x60
[<ffffffff8141a6db>] bus_for_each_dev+0x7b/0xc0
[<ffffffff8141c3a6>] driver_attach+0x26/0x40
[<ffffffff8141bff8>] bus_add_driver+0x168/0x210
[<ffffffff8141d510>] driver_register+0x60/0xe0
[<ffffffff8138621e>] __pci_register_driver+0x6e/0x80
[<ffffffff81c2357d>] ? uncore_cpu_setup+0x33/0x33
[<ffffffff81c236c0>] intel_uncore_init+0x143/0x4b4
[<ffffffff81c2357d>] ? uncore_cpu_setup+0x33/0x33
[<ffffffff810003a4>] do_one_initcall+0x94/0x1a0
[<ffffffff81c15c7f>] kernel_init_freeable+0x1c9/0x2c1
[<ffffffff81c14eb2>] ? initcall_blacklist+0x148/0x148
[<ffffffff815a9aa0>] ? rest_init+0x80/0x80
[<ffffffff815a9aae>] kernel_init+0xe/0x100
[<ffffffff815baebe>] ret_from_fork+0x3e/0x70
[<ffffffff815a9aa0>] ? rest_init+0x80/0x80
---[ end trace 798d4837c5b5aaa7 ]---
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1439212845.321:1): initialized
page_owner is disabled
zpool: loaded
zbud: loaded
cryptomgr_test (37) used greatest stack depth: 14392 bytes left
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm
sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
ata1: SATA max UDMA/133 abar m2048@0xe063c000 port 0xe063c100 irq 42
ata2: DUMMY
ata3: DUMMY
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 0 bytes nvram, hpet irqs
Intel P-state driver initializing.
Initializing XFRM netlink socket
NET: Registered protocol family 10
Key type dns_resolver registered
registered taskstats version 1
Btrfs loaded
rtc_cmos 00:02: setting system clock to 2015-08-10 13:20:45 UTC (1439212845)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-10: INTEL SSDSC2BF240A5L, LTVi, max UDMA/133
ata1.00: 468862128 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BF24 LTVi PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
BTRFS: device fsid 3ac03d1d-c85f-4bf4-9c62-a0e05b23fa8d devid 1 transid 191438
/dev/root
BTRFS info (device sda3): disk space caching is enabled
BTRFS: detected SSD devices, enabling SSD mode
VFS: Mounted root (btrfs filesystem) readonly on device 0:15.
devtmpfs: mounted
Freeing unused kernel memory: 1340K (ffffffff81c00000 - ffffffff81d4f000)
setfont (89) used greatest stack depth: 8 bytes left
systemd-udevd[292]: starting version 216
random: systemd-udevd urandom read with 11 bits of entropy available
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic
conservative mode
Linux agpgart interface v0.103
ehci-pci: EHCI PCI platform driver
tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
ACPI: Battery Slot [BAT0] (battery present)
[drm] Initialized drm 1.1.0 20060810
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [AC] (on-line)
wmi: Mapper loaded
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (59 C)
rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 44
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS GJET83WW (2.33 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad T440s, model 20AQCTO1WW
input: PC Speaker as /devices/platform/pcspkr/input/input3
thinkpad_acpi: Unsupported brightness interface, please contact
ibm-acpi-de...@lists.sourceforge.net
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control,
supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input4
cfg80211: Calling CRDA to update world regulatory domain
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input5
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
tpm_tis 00:05: TPM is disabled/deactivated (0x6)
iwlwifi 0000:03:00.0: loaded firmware version 25.32.13.0 op_mode iwlmvm
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter
Oruba
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
Setting dangerous option enable_rc6 - tainting kernel
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp),
(dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A,
2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A,
2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
tsc: Refined TSC clocksource calibration: 2494.226 MHz
clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3eb3743e,
max_idle_ns: 440795257847 ns
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
systemd-udevd[306]: renamed network interface wlan0 to wlp3s0
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:f7:28:0e:15:45
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
e1000e 0000:00:19.0 enp0s25: renamed from eth0
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xe063d000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.1.4-hardened ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks
0x0000b810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.1.4-hardened xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
systemd-udevd[306]: renamed network interface eth0 to enp0s25
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.1.4-hardened xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
snd_hda_intel: probe of 0000:00:03.0 failed with error -2
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[drm] Memory usable by graphics device = 2048M
[drm] VT-d active for gfx access
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] DMAR active, disabling use of stolen memory
vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
snd_hda_codec_generic hdaudioC0D0: autoconfig for ID 292: line_outs=1
(0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_generic hdaudioC0D0: inputs:
snd_hda_codec_generic hdaudioC0D0: Mic=0x1a
snd_hda_codec_generic hdaudioC0D0: Internal Mic=0x12
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0
[drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
fbcon: inteldrmfb (fb0) is primary device
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 3-3: new SuperSpeed USB device number 2 using xhci_hcd
usb 3-3: New USB device found, idVendor=17ef, idProduct=1010
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: Lenovo ThinkPad Dock
usb 3-3: Manufacturer: LENOVO
hub 3-3:1.0: USB hub found
hub 3-3:1.0: 4 ports detected
usb 2-3: new high-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=8000
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
usb 2-3: New USB device found, idVendor=17ef, idProduct=1010
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Lenovo ThinkPad Dock
usb 2-3: Manufacturer: LENOVO
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4684]
psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1170..]
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps:
0xd001a3/0x940300/0x12e800, board id: 2962, fw id: 2560
psmouse serio1: synaptics: serio: Synaptics pass-through port at
isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input7
usb 2-3.2: new high-speed USB device number 3 using xhci_hcd
Switched to clocksource tsc
usb 2-3.2: New USB device found, idVendor=0ccd, idProduct=00ab
usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.2: Product: Cinergy T XXS
usb 2-3.2: Manufacturer: TerraTec GmbH
usb 2-3.2: SerialNumber: 0000000001
usb 2-3.4: new high-speed USB device number 4 using xhci_hcd
usb 2-3.4: New USB device found, idVendor=17ef, idProduct=100f
usb 2-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.4: Product: Lenovo ThinkPad Dock
usb 2-3.4: Manufacturer: Lenovo
usb 2-3.4: SerialNumber: Rev1.2
hub 2-3.4:1.0: USB hub found
hub 2-3.4:1.0: 3 ports detected
dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in cold state, will try
to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
usb 2-3.4.1: new low-speed USB device number 5 using xhci_hcd
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
usb 2-3.4.1: New USB device found, idVendor=046d, idProduct=c062
usb 2-3.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3.4.1: Product: USB Laser Mouse
usb 2-3.4.1: Manufacturer: Logitech
usb 2-3.4.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80
microframes
usb 2-3.4.2: new low-speed USB device number 6 using xhci_hcd
dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Terratec Cinergy T USB XXS (HD)/ T3)
usb 2-3.4.2: New USB device found, idVendor=046a, idProduct=0023
usb 2-3.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-3.4.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80
microframes
usb 2-3.4.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80
microframes
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HID 046a:0023 as
/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.2/2-3.4.2:1.0/0003:046A:0023.0002/input/input12
input: Logitech USB Laser Mouse as
/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.1/2-3.4.1:1.0/0003:046D:C062.0001/input/input13
xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD
ep_index 0 comp_code 1
xhci_hcd 0000:00:14.0: Looking for event-dma 00000000fffdb000 trb-start
00000000fffdcfd0 trb-end 00000000fffdd000 seg-start 00000000fffdc000 seg-end
00000000fffdcff0
cherry 0003:046A:0023.0002: input: USB HID v1.11 Keyboard [HID 046a:0023] on
usb-0000:00:14.0-3.4.2/input0
hid-generic 0003:046D:C062.0001: input: USB HID v1.10 Mouse [Logitech USB
Laser Mouse] on usb-0000:00:14.0-3.4.1/input0
input: HID 046a:0023 as
/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.2/2-3.4.2:1.1/0003:046A:0023.0003/input/input14
cherry 0003:046A:0023.0003: input: USB HID v1.11 Device [HID 046a:0023] on
usb-0000:00:14.0-3.4.2/input1
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as
/devices/platform/i8042/serio1/serio2/input/input11
usb 2-3.2: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD
ep_index 0 comp_code 1
xhci_hcd 0000:00:14.0: Looking for event-dma 00000000fffdb000 trb-start
00000000fffdcfd0 trb-end 00000000fffdd000 seg-start 00000000fffdc000 seg-end
00000000fffdcff0
DiB0070 I2C write failed
DiB0070: successfully identified
Registered IR keymap rc-dib0700-rc5
input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/rc/rc0/input15
rc0: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/rc/rc0
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Terratec Cinergy T USB XXS (HD)/ T3 successfully initialized and
connected.
usbcore: registered new interface driver dvb_usb_dib0700
grsec: time set by /sbin/hwclock[hwclock:412] uid/euid:0/0 gid/egid:0/0,
parent /lib64/rc/sh/openrc-run.sh[openrc-run.sh:411] uid/euid:0/0 gid/egid:0/0
grsec: time set by /sbin/hwclock[hwclock:412] uid/euid:0/0 gid/egid:0/0,
parent /lib64/rc/sh/openrc-run.sh[openrc-run.sh:411] uid/euid:0/0 gid/egid:0/0
grsec: time set by /sbin/hwclock[hwclock:414] uid/euid:0/0 gid/egid:0/0,
parent /lib64/rc/sh/openrc-run.sh[openrc-run.sh:413] uid/euid:0/0 gid/egid:0/0
BTRFS info (device sda3): turning on discard
BTRFS info (device sda3): use spread ssd allocation scheme
BTRFS info (device sda3): disk space caching is enabled
microcode: Microcode Update Driver: v2.00 removed.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
IPv6: ADDRCONF(NETDEV_UP): tap0: link is not ready
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update
your scripts to load br_netfilter if you need this.
device tap0 entered promiscuous mode
device br0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
random: nonblocking pool is initialized
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
NET: Registered protocol family 17
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
wlp3s0: authenticate with 08:96:d7:05:f9:2a
wlp3s0: send auth to 08:96:d7:05:f9:2a (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 08:96:d7:05:f9:2a (try 1/3)
wlp3s0: RX AssocResp from 08:96:d7:05:f9:2a (capab=0x431 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp),
(dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A,
2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A,
2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81a936c0)
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
