In the original driver it is missed to setup a free running driver.
This timer is needed for the scheduler.
So setup it.
Signed-off-by: Hans Ulli Kroll <ulli.kr...@googlemail.com>
---
arch/arm/mach-gemini/time.c | 21 ++++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-gemini/time.c b/arch/arm/mach-gemini/time.c
index 5e2b1ba..f5f18df 100644
--- a/arch/arm/mach-gemini/time.c
+++ b/arch/arm/mach-gemini/time.c
@@ -15,6 +15,7 @@
#include <asm/mach/time.h>
#include <linux/clockchips.h>
#include <linux/clocksource.h>
+#include <linux/sched_clock.h>
/*
* Register definitions for the timers
@@ -62,6 +63,11 @@
static unsigned int tick_rate;
+static u64 notrace gemini_read_sched_clock(void)
+{
+ return readl(TIMER_COUNT(TIMER3_BASE));
+}
+
static int gemini_timer_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
@@ -206,8 +212,21 @@ void __init gemini_timer_init(void)
writel(TIMER_DEFAULT_FLAGS, TIMER_CR);
/*
- * Setup clockevent timer (interrupt-driven.)
+ * Setup free-running clocksource timer (interrupts
+ * disabled.)
*/
+ writel(0, TIMER_COUNT(TIMER3_BASE));
+ writel(0, TIMER_LOAD(TIMER3_BASE));
+ writel(0, TIMER_MATCH1(TIMER3_BASE));
+ writel(0, TIMER_MATCH2(TIMER3_BASE));
+ clocksource_mmio_init(TIMER_COUNT(TIMER3_BASE),
+ "gemini_clocksource", tick_rate,
+ 300, 32, clocksource_mmio_readl_up);
+ sched_clock_register(gemini_read_sched_clock, 32, tick_rate);
+
+ /*
+ * Setup clockevent timer (interrupt-driven.)
+ */
writel(0, TIMER_COUNT(TIMER1_BASE));
writel(0, TIMER_LOAD(TIMER1_BASE));
writel(0, TIMER_MATCH1(TIMER1_BASE));
--
2.4.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
