On 12/08/15 17:08, Srinivas Pandruvada wrote:
> Can you not merge this with patch 2/6?
Meh, I already took that one so will take this one separately.
You are correct of course that it might makes sense to do this
all together. Ah well ;)
> On Wed, 2015-08-12 at 16:50 +0200, Markus Pargmann wrote:
>> Signed-off-by: Markus Pargmann <m...@pengutronix.de>
Applied.
>> ---
>> drivers/iio/gyro/bmg160.c | 55
>> +++++++++++++++++++++++------------------------
>> 1 file changed, 27 insertions(+), 28 deletions(-)
>>
>> diff --git a/drivers/iio/gyro/bmg160.c b/drivers/iio/gyro/bmg160.c
>> index 6eab91ba8977..39df64fb4262 100644
>> --- a/drivers/iio/gyro/bmg160.c
>> +++ b/drivers/iio/gyro/bmg160.c
>> @@ -110,6 +110,7 @@ struct bmg160_data {
>> int slope_thres;
>> bool dready_trigger_on;
>> bool motion_trigger_on;
>> + int irq;
>> };
>>
>> enum bmg160_axis {
>> @@ -961,18 +962,14 @@ static const struct iio_buffer_setup_ops
>> bmg160_buffer_setup_ops = {
>> .postdisable = bmg160_buffer_postdisable,
>> };
>>
>> -static int bmg160_gpio_probe(struct i2c_client *client,
>> - struct bmg160_data *data)
>> +static int bmg160_gpio_probe(struct bmg160_data *data)
>>
>> {
>> struct device *dev;
>> struct gpio_desc *gpio;
>> int ret;
>>
>> - if (!client)
>> - return -EINVAL;
>> -
>> - dev = &client->dev;
>> + dev = data->dev;
>>
>> /* data ready gpio interrupt pin */
>> gpio = devm_gpiod_get_index(dev, BMG160_GPIO_NAME, 0, GPIOD_IN);
>> @@ -981,11 +978,11 @@ static int bmg160_gpio_probe(struct i2c_client *client,
>> return PTR_ERR(gpio);
>> }
>>
>> - ret = gpiod_to_irq(gpio);
>> + data->irq = gpiod_to_irq(gpio);
>>
>> dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
>>
>> - return ret;
>> + return 0;
>> }
>>
>> static const char *bmg160_match_acpi_device(struct device *dev)
>> @@ -1007,6 +1004,7 @@ static int bmg160_probe(struct i2c_client *client,
>> int ret;
>> const char *name = NULL;
>> struct regmap *regmap;
>> + struct device *dev = &client->dev;
>>
>> regmap = devm_regmap_init_i2c(client, &bmg160_regmap_i2c_conf);
>> if (IS_ERR(regmap)) {
>> @@ -1020,8 +1018,9 @@ static int bmg160_probe(struct i2c_client *client,
>> return -ENOMEM;
>>
>> data = iio_priv(indio_dev);
>> - dev_set_drvdata(&client->dev, indio_dev);
>> - data->dev = &client->dev;
>> + dev_set_drvdata(dev, indio_dev);
>> + data->dev = dev;
>> + data->irq = client->irq;
>>
>> ret = bmg160_chip_init(data);
>> if (ret < 0)
>> @@ -1032,22 +1031,22 @@ static int bmg160_probe(struct i2c_client *client,
>> if (id)
>> name = id->name;
>>
>> - if (ACPI_HANDLE(&client->dev))
>> - name = bmg160_match_acpi_device(&client->dev);
>> + if (ACPI_HANDLE(dev))
>> + name = bmg160_match_acpi_device(dev);
>>
>> - indio_dev->dev.parent = &client->dev;
>> + indio_dev->dev.parent = dev;
>> indio_dev->channels = bmg160_channels;
>> indio_dev->num_channels = ARRAY_SIZE(bmg160_channels);
>> indio_dev->name = name;
>> indio_dev->modes = INDIO_DIRECT_MODE;
>> indio_dev->info = &bmg160_info;
>>
>> - if (client->irq <= 0)
>> - client->irq = bmg160_gpio_probe(client, data);
>> + if (data->irq <= 0)
>> + bmg160_gpio_probe(data);
>>
>> - if (client->irq > 0) {
>> - ret = devm_request_threaded_irq(&client->dev,
>> - client->irq,
>> + if (data->irq > 0) {
>> + ret = devm_request_threaded_irq(dev,
>> + data->irq,
>> bmg160_data_rdy_trig_poll,
>> bmg160_event_handler,
>> IRQF_TRIGGER_RISING,
>> @@ -1056,28 +1055,28 @@ static int bmg160_probe(struct i2c_client *client,
>> if (ret)
>> return ret;
>>
>> - data->dready_trig = devm_iio_trigger_alloc(&client->dev,
>> + data->dready_trig = devm_iio_trigger_alloc(dev,
>> "%s-dev%d",
>> indio_dev->name,
>> indio_dev->id);
>> if (!data->dready_trig)
>> return -ENOMEM;
>>
>> - data->motion_trig = devm_iio_trigger_alloc(&client->dev,
>> + data->motion_trig = devm_iio_trigger_alloc(dev,
>> "%s-any-motion-dev%d",
>> indio_dev->name,
>> indio_dev->id);
>> if (!data->motion_trig)
>> return -ENOMEM;
>>
>> - data->dready_trig->dev.parent = &client->dev;
>> + data->dready_trig->dev.parent = dev;
>> data->dready_trig->ops = &bmg160_trigger_ops;
>> iio_trigger_set_drvdata(data->dready_trig, indio_dev);
>> ret = iio_trigger_register(data->dready_trig);
>> if (ret)
>> return ret;
>>
>> - data->motion_trig->dev.parent = &client->dev;
>> + data->motion_trig->dev.parent = dev;
>> data->motion_trig->ops = &bmg160_trigger_ops;
>> iio_trigger_set_drvdata(data->motion_trig, indio_dev);
>> ret = iio_trigger_register(data->motion_trig);
>> @@ -1092,25 +1091,25 @@ static int bmg160_probe(struct i2c_client *client,
>> bmg160_trigger_handler,
>> &bmg160_buffer_setup_ops);
>> if (ret < 0) {
>> - dev_err(&client->dev,
>> + dev_err(dev,
>> "iio triggered buffer setup failed\n");
>> goto err_trigger_unregister;
>> }
>>
>> ret = iio_device_register(indio_dev);
>> if (ret < 0) {
>> - dev_err(&client->dev, "unable to register iio device\n");
>> + dev_err(dev, "unable to register iio device\n");
>> goto err_buffer_cleanup;
>> }
>>
>> - ret = pm_runtime_set_active(&client->dev);
>> + ret = pm_runtime_set_active(dev);
>> if (ret)
>> goto err_iio_unregister;
>>
>> - pm_runtime_enable(&client->dev);
>> - pm_runtime_set_autosuspend_delay(&client->dev,
>> + pm_runtime_enable(dev);
>> + pm_runtime_set_autosuspend_delay(dev,
>> BMG160_AUTO_SUSPEND_DELAY_MS);
>> - pm_runtime_use_autosuspend(&client->dev);
>> + pm_runtime_use_autosuspend(dev);
>>
>> return 0;
>>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
