Hi, Michal.
On 08/12/2015 09:23 PM, Michal Suchanek wrote:
> The driver has open-coded test for SDIO cards. Use the mmc core provided
> MMC_QUIRK_BROKEN_CLK_GATING flag instead.
Did you use the clock-gating for SDIO cards?
Doesn't MMC_CAP_SDIO_IRQ bit set? Which case is broken?
Could you explain to me more?
Best Regards,
Jaehoon Chung
>
> As a bonus this may enable clock gating on SDIO cards that are known to
> work with it.
>
> Signed-off-by: Michal Suchanek <hramr...@gmail.com>
> ---
> drivers/mmc/host/dw_mmc.c | 33 +++++++++++++++------------------
> 1 file changed, 15 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 40e9d8e..3bc9fd7 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -1335,27 +1335,24 @@ static void dw_mci_init_card(struct mmc_host *mmc,
> struct mmc_card *card)
> * description of the CLKENA register we should disable low power mode
> * for SDIO cards if we need SDIO interrupts to work.
> */
> - if (mmc->caps & MMC_CAP_SDIO_IRQ) {
> - const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id;
> - u32 clk_en_a_old;
> - u32 clk_en_a;
> + const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id;
> + u32 clk_en_a_old;
> + u32 clk_en_a;
>
> - clk_en_a_old = mci_readl(host, CLKENA);
> + clk_en_a_old = mci_readl(host, CLKENA);
>
> - if (card->type == MMC_TYPE_SDIO ||
> - card->type == MMC_TYPE_SD_COMBO) {
> - set_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
> - clk_en_a = clk_en_a_old & ~clken_low_pwr;
> - } else {
> - clear_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
> - clk_en_a = clk_en_a_old | clken_low_pwr;
> - }
> + if (card->quirks & MMC_QUIRK_BROKEN_CLK_GATING) {
> + set_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
> + clk_en_a = clk_en_a_old & ~clken_low_pwr;
> + } else {
> + clear_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
> + clk_en_a = clk_en_a_old | clken_low_pwr;
> + }
>
> - if (clk_en_a != clk_en_a_old) {
> - mci_writel(host, CLKENA, clk_en_a);
> - mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
> - SDMMC_CMD_PRV_DAT_WAIT, 0);
> - }
> + if (clk_en_a != clk_en_a_old) {
> + mci_writel(host, CLKENA, clk_en_a);
> + mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
> + SDMMC_CMD_PRV_DAT_WAIT, 0);
> }
> }
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
