On Thursday, August 20, 2015 at 08:55:05 AM, vn...@altera.com wrote:
> From: VIET NGA DAO <vn...@altera.com>
>
> Altera Quad SPI Controller is a soft IP which enables access to
> Altera EPCS and EPCQ flash chips. This patch adds driver
> for these devices.
>
> Signed-off-by: VIET NGA DAO <vn...@altera.com>
>
> ---
> v5:
> - Remove Micron support
> - Add multiple flashes probe failure handle
>
> v4:
> - Add more flash devices support ( EPCQL and Micron)
> - Remove redundant messages
> - Change EPCQ_OPCODE_ID to NON_EPCS_OPCODE_ID
> - Replace get_flash_name to altera_quadspi_scan
> - Remove clk related parts
> - Remove altera_quadspi_plat
> - Change device tree reg name and remove opcode-id
>
> v3:
> - Change altera_epcq driver name to altera_quadspi for more generic name
> - Implement flash name searching in altera_quadspi.c instead of spi-nor
> - Edit the altra quadspi info table in spi-nor
> - Remove wait_til_ready in all read,write, erase, lock, unlock functions
> - Merge .h and .c into 1 file
>
> v2:
> - Change to spi_nor structure
> - Add lock and unlock functions for spi_nor
> - Simplify the altera_epcq_lock function
> - Replace reg by compatible in device tree
> ---
> .../devicetree/bindings/mtd/altera-quadspi.txt | 45 ++
> drivers/mtd/spi-nor/Kconfig | 8 +
> drivers/mtd/spi-nor/Makefile | 1 +
> drivers/mtd/spi-nor/altera-quadspi.c | 557
> ++++++++++++++++++++ drivers/mtd/spi-nor/spi-nor.c |
> 18 +
> 5 files changed, 629 insertions(+), 0 deletions(-)
> create mode 100644
> Documentation/devicetree/bindings/mtd/altera-quadspi.txt create mode
> 100644 drivers/mtd/spi-nor/altera-quadspi.c
>
> diff --git a/Documentation/devicetree/bindings/mtd/altera-quadspi.txt
> b/Documentation/devicetree/bindings/mtd/altera-quadspi.txt new file mode
> 100644
> index 0000000..e1bcf18
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/altera-quadspi.txt
> @@ -0,0 +1,45 @@
> +* MTD Altera QUADSPI driver
> +
> +Required properties:
> +- compatible: Should be "altr,quadspi-1.0"
> +- reg: Address and length of the register set for the device. It contains
> + the information of registers in the same order as described by reg-names
> +- reg-names: Should contain the reg names
> + "avl_csr": Should contain the register configuration base address
> + "avl_mem": Should contain the data base address
> +- #address-cells: Must be <1>.
> +- #size-cells: Must be <0>.
> +- flash device tree subnode, there must be a node with the following
> fields: + - compatible: Should contain the flash name:
> + 1. EPCS: epcs16, epcs64, epcs128
> + 2. EPCQ: epcq16, epcq32, epcq64, epcq128, epcq256, epcq512, epcq1024
> + 3. EPCQ-L: epcql256, epcql512, epcql1024
> + - #address-cells: please refer to /mtd/partition.txt
> + - #size-cells: please refer to /mtd/partition.txt
> + For partitions inside each flash, please refer to /mtd/partition.txt
> +
> +Example:
> +
> + quadspi_controller_0: quadspi@0x180014a0 {
> + compatible = "altr,quadspi-1.0";
> + reg = <0x180014a0 0x00000020>,
> + <0x14000000 0x04000000>;
> + reg-names = "avl_csr", "avl_mem";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + flash0: epcq256@0 {
> + compatible = "altr,epcq256";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + partition@0 {
> + /* 16 MB for raw data. */
> + label = "EPCQ Flash 0 raw data";
> + reg = <0x0 0x1000000>;
> + };
> + partition@1000000 {
> + /* 16 MB for jffs2 data. */
> + label = "EPCQ Flash 0 JFFS 2";
> + reg = <0x1000000 0x1000000>;
> + };
IIRC, encoding partitions into OF is deprecated (and it shouldn't be
part of the example anyway, so please remove this bit).
> + };
> + }; //end quadspi@0x180014a0 (quadspi_controller_0)
Remove this incorrect comment.
[...]
> +static struct flash_device flash_devices[] = {
> + FLASH_ID("epcs16", EPCS_OPCODE_ID, 0x14),
> + FLASH_ID("epcs64", EPCS_OPCODE_ID, 0x16),
> + FLASH_ID("epcs128", EPCS_OPCODE_ID, 0x18),
> +
> + FLASH_ID("epcq16", NON_EPCS_OPCODE_ID, 0x15),
> + FLASH_ID("epcq32", NON_EPCS_OPCODE_ID, 0x16),
> + FLASH_ID("epcq64", NON_EPCS_OPCODE_ID, 0x17),
> + FLASH_ID("epcq128", NON_EPCS_OPCODE_ID, 0x18),
> + FLASH_ID("epcq256", NON_EPCS_OPCODE_ID, 0x19),
> + FLASH_ID("epcq512", NON_EPCS_OPCODE_ID, 0x20),
> + FLASH_ID("epcq1024", NON_EPCS_OPCODE_ID, 0x21),
> +
> + FLASH_ID("epcql256", NON_EPCS_OPCODE_ID, 0x19),
> + FLASH_ID("epcql512", NON_EPCS_OPCODE_ID, 0x20),
> + FLASH_ID("epcql1024", NON_EPCS_OPCODE_ID, 0x21),
> +
> +};
I think it'd be better to wait until the IP block is fixed and can
issue READID correctly.
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index 14a5d23..2ab7279 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -687,6 +687,24 @@ static const struct spi_device_id spi_nor_ids[] = {
> { "cat25c09", CAT25_INFO( 128, 8, 32, 2, SPI_NOR_NO_ERASE |
> SPI_NOR_NO_FR) }, { "cat25c17", CAT25_INFO( 256, 8, 32, 2,
> SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, { "cat25128", CAT25_INFO(2048, 8, 64,
> 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, +
> + /* Altera EPCQ/EPCS Flashes are non-JEDEC */
Are they really ? Last time I checked on CV SoC, I was able to read their
JEDEC ID just fine ; though it's true I used that EPCS core.
> + { "epcs16", INFO(0, 0, 0x10000, 32, 0) },
> + { "epcs64", INFO(0, 0, 0x10000, 128, 0) },
> + { "epcs128", INFO(0, 0, 0x40000, 256, 0) },
> +
> + { "epcq16", INFO(0, 0, 0x10000, 32, 0) },
> + { "epcq32", INFO(0, 0, 0x10000, 64, 0) },
> + { "epcq64", INFO(0, 0, 0x10000, 128, 0) },
> + { "epcq128", INFO(0, 0, 0x10000, 256, 0) },
> + { "epcq256", INFO(0, 0, 0x10000, 512, 0) },
> + { "epcq512", INFO(0, 0, 0x10000, 1024, 0) },
> + { "epcq1024", INFO(0, 0, 0x10000, 2048, 0) },
> +
> + { "epcql256", INFO(0, 0, 0x10000, 512, 0) },
> + { "epcql512", INFO(0, 0, 0x10000, 1024, 0) },
> + { "epcql1024", INFO(0, 0, 0x10000, 2048, 0) },
> +
> { },
> };
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
