On 21.08.2015 15:58, Joonyoung Shim wrote: > On 08/21/2015 10:21 AM, Krzysztof Kozlowski wrote: >> On 21.08.2015 10:00, Joonyoung Shim wrote: >>> On 08/21/2015 09:44 AM, Krzysztof Kozlowski wrote: >>>> On 21.08.2015 08:15, Alexandre Belloni wrote: >>>>> Hi, >>>>> >>>>> On 13/08/2015 at 17:49:24 +0900, Joonyoung Shim wrote : >>>>>> According to datasheet, the S2MPS13X and S2MPS14X should update write >>>>>> buffer via setting WUDR bit to high after ctrl register is updated. >>>>>> >>>>>> If not, ALARM interrupt of rtc-s5m doesn't happen first time when i use >>>>>> tools/testing/selftests/timers/rtctest.c test program and hour format is >>>>>> used to 12 hour mode in Odroid-XU3 board. >>>>>> >>>>> >>>>> >From what I understood, I should expect a v2 of tihat patch also setting >>>>> RUDR, is that right? OR would you prefer that I apply that one and then >>>>> fix RUDR in a following patch? >>>> >>>> Right, I would expect that as well... or a comment if this is not needed. >>>> >>> >>> Hmm, the driver only writes control register now, so i don't feel the >>> need of patch setting RUDR for control register. >> >> Yes, you're right. There is only regmap_write() (not >> remap_update_bits()) so your patch is completely fine. Thanks for >> explanation. >> >> Reviewed-by: Krzysztof Kozlowski <k.kozlow...@samsung.com> >> > > Thanks for review. > > I found one more issue, the RTC doesn't keep time on Odroid-XU3 board > when i turn on board after power off even if RTC battery is connected. > > A difference with RTC driver of hardkernel kernel is that it sets > not only WUDR bit but also RUDR bit to high at the same time after > RTC_CTRL register is written. It's same with condition of only writing > ALARM registers like below description.
It seems that setting RUDR to high is needed... but it shouldn't. For example in SM-G900H with S2MPS11 it is set before reading RTC_CTRL register. Mainline driver does not perform read. Maybe RUDR is not set high properly before some next time read and your code is a coincidence, a work-around? Best regards, Krzysztof > > from S2MPS14 datasheet: > "3. For write only Alarm 0&1 Registers (0x0B~0x18), set WUDR & RUDR > bits to high." > > So i tried it and it works well with keeping time. I'm not sure RTC of > S2MPS13 type also has a similar issue because it differs a little bit. > > from S2MPS13 datasheet: > "3. For write only Alarm 0&1 Registers (0x0B~0x18), set WUDR & A_UDR > bits to high." > > If S2MPS13 also has same issue, we can fix the problem via just below > patch. > > diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c > index 8c70d78..bb8e888 100644 > --- a/drivers/rtc/rtc-s5m.c > +++ b/drivers/rtc/rtc-s5m.c > @@ -635,6 +635,10 @@ static int s5m8767_rtc_init_reg(struct s5m_rtc_info > *info) > case S2MPS13X: > data[0] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT); > ret = regmap_write(info->regmap, info->regs->ctrl, data[0]); > + if (ret < 0) > + break; > + > + ret = s5m8767_rtc_set_alarm_reg(info); > break; > > default: > > But i can't find any reasonable reason about this fix from datasheet, > > Thanks. > >> Best regards, >> Krzysztof >> >>> >>>> Best regards, >>>> Krzysztof >>>> >>>> >>>>> >>>>>> Signed-off-by: Joonyoung Shim <jy0922.s...@samsung.com> >>>>>> Cc: <sta...@vger.kernel.org> >>>>> >>>>> can you update the stable tag with the kernel version introducing the >>>>> issue? >>> >>> Sure, i think it should be v3.16. >>> >>>>> >>>>>> --- >>>>>> drivers/rtc/rtc-s5m.c | 12 ++++++++++++ >>>>>> 1 file changed, 12 insertions(+) >>>>> >>>>>> diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c >>>>>> index 8c70d78..03828bb 100644 >>>>>> --- a/drivers/rtc/rtc-s5m.c >>>>>> +++ b/drivers/rtc/rtc-s5m.c >>>>>> @@ -635,6 +635,18 @@ static int s5m8767_rtc_init_reg(struct s5m_rtc_info >>>>>> *info) >>>>>> case S2MPS13X: >>>>>> data[0] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT); >>>>>> ret = regmap_write(info->regmap, info->regs->ctrl, >>>>>> data[0]); >>>>>> + if (ret < 0) >>>>>> + break; >>>>>> + >>>>>> + ret = regmap_update_bits(info->regmap, >>>>>> + info->regs->rtc_udr_update, >>>>>> + info->regs->rtc_udr_mask, >>>>>> + info->regs->rtc_udr_mask); >>>>> >>>>> Very small indentation issue here, it should be aligned with the open >>>>> parenthesis. >>> >>> OK, i will. >>> >>> Thanks. >>> >> >> > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/