88PM800 family of devices supports buffered 32KHz clock output,
for example,
88PM800: CLK32k_1, CLK32k_2 and CLK32k_3
88PM860: CLK32K_1 and CLK32K_2
This patch adds new clk provider driver to support enable/disable
of the 32KHz clock output from 88PM800 family of devices.
Signed-off-by: Vaibhav Hiremath <vaibhav.hirem...@linaro.org>
---
drivers/clk/Kconfig | 8 ++
drivers/clk/Makefile | 1 +
drivers/clk/clk-88pm800.c | 341 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 350 insertions(+)
create mode 100644 drivers/clk/clk-88pm800.c
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 42f7120..c34c14d 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -167,6 +167,14 @@ config COMMON_CLK_CDCE706
---help---
This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.
+config COMMON_CLK_88PM800
+ tristate "Clock driver for 88PM800 MFD"
+ depends on MFD_88PM800
+ ---help---
+ This driver supports 88PM800 & 88PM860 crystal oscillator
+ clock. These multi-function devices have two (88PM860) or three
+ (88PM800) fixed-rate output, clocked at 32KHz each.
+
source "drivers/clk/bcm/Kconfig"
source "drivers/clk/hisilicon/Kconfig"
source "drivers/clk/qcom/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index c4cf075..5248cd3 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -80,3 +80,4 @@ obj-$(CONFIG_X86) += x86/
obj-$(CONFIG_ARCH_ZX) += zte/
obj-$(CONFIG_ARCH_ZYNQ) += zynq/
obj-$(CONFIG_H8300) += h8300/
+obj-$(CONFIG_COMMON_CLK_88PM800) += clk-88pm800.o
diff --git a/drivers/clk/clk-88pm800.c b/drivers/clk/clk-88pm800.c
new file mode 100644
index 0000000..4c045e1
--- /dev/null
+++ b/drivers/clk/clk-88pm800.c
@@ -0,0 +1,341 @@
+/*
+ * clk-88pm800.c - Clock driver for 88PM800 family of devices
+ *
+ * This driver is created based on clk-s2mps11.c
+ *
+ * Copyright (C) 2015 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/clkdev.h>
+#include <linux/regmap.h>
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/88pm80x.h>
+
+/* Number of clocks output from 88pm800 family of device */
+enum {
+ PM800_CLK32K_1 = 0,
+ PM800_CLK32K_2,
+ PM800_CLK32K_3,
+ PM800_CLKS_NUM,
+};
+
+struct pm800_clk {
+ struct pm80x_chip *chip;
+ struct device_node *clk_np;
+ struct clk_hw hw;
+ struct clk *clk;
+ struct clk_lookup *lookup;
+ u32 mask;
+ u32 shift;
+ unsigned int reg;
+};
+
+static struct pm800_clk *to_pm800_clk(struct clk_hw *hw)
+{
+ return container_of(hw, struct pm800_clk, hw);
+}
+
+static int pm800_clk_prepare(struct clk_hw *hw)
+{
+ struct pm800_clk *pm800 = to_pm800_clk(hw);
+
+ /* We always want to use XO clock */
+ return regmap_update_bits(pm800->chip->regmap,
+ pm800->reg,
+ pm800->mask,
+ PM800_32K_OUTX_SEL_XO_32KHZ << pm800->shift);
+}
+
+static void pm800_clk_unprepare(struct clk_hw *hw)
+{
+ struct pm800_clk *pm800 = to_pm800_clk(hw);
+
+ regmap_update_bits(pm800->chip->regmap, pm800->reg,
+ pm800->mask, ~pm800->mask);
+}
+
+static int pm800_clk_is_prepared(struct clk_hw *hw)
+{
+ int ret;
+ u32 val;
+ struct pm800_clk *pm800 = to_pm800_clk(hw);
+
+ ret = regmap_read(pm800->chip->regmap,
+ pm800->reg, &val);
+ if (ret < 0)
+ return -EINVAL;
+
+ return (val & pm800->mask) >> pm800->shift;
+}
+
+static unsigned long pm800_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ return 32768;
+}
+
+static const struct clk_ops pm800_clk_ops = {
+ .prepare = pm800_clk_prepare,
+ .unprepare = pm800_clk_unprepare,
+ .is_prepared = pm800_clk_is_prepared,
+ .recalc_rate = pm800_clk_recalc_rate,
+};
+
+static struct clk_init_data pm800_clks_init[PM800_CLKS_NUM] = {
+ [PM800_CLK32K_1] = {
+ .name = "pm800_clk32k_1",
+ .ops = &pm800_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+ [PM800_CLK32K_2] = {
+ .name = "pm800_clk32k_2",
+ .ops = &pm800_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+ [PM800_CLK32K_3] = {
+ .name = "pm800_clk32k_3",
+ .ops = &pm800_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+};
+
+static struct clk_init_data pm860_clks_init[PM800_CLKS_NUM] = {
+ [PM800_CLK32K_1] = {
+ .name = "pm800_clk32k_1",
+ .ops = &pm800_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+ [PM800_CLK32K_2] = {
+ .name = "pm800_clk32k_2",
+ .ops = &pm800_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+};
+
+static int pm800_init_clk(struct pm800_clk *pm800_clks)
+{
+ int ret;
+
+ /* Enable XO_LJ : Low jitter clock of 32KHz from XO */
+ ret = regmap_update_bits(pm800_clks->chip->regmap, PM800_LOW_POWER2,
+ PM800_LOW_POWER2_XO_LJ_EN, PM800_LOW_POWER2_XO_LJ_EN);
+ if (ret)
+ return ret;
+
+ /* Enable USE_XO : Use XO clock for all internal timing reference */
+ ret = regmap_update_bits(pm800_clks->chip->regmap, PM800_RTC_CONTROL,
+ PM800_RTC1_USE_XO, PM800_RTC1_USE_XO);
+ if (ret)
+ return ret;
+
+ /* OSC_FREERUN: Enable Osc free running mode by clearing the bit */
+ ret = regmap_update_bits(pm800_clks->chip->regmap, PM800_OSC_CNTRL1,
+ PM800_OSC_CNTRL1_OSC_FREERUN_EN, 0);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static struct device_node *pm800_clk_parse_dt(struct platform_device *pdev,
+ struct clk_init_data *clks_init)
+{
+ struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+ struct device_node *clk_np;
+ int i;
+
+ if (!chip->dev->of_node)
+ return ERR_PTR(-EINVAL);
+
+ clk_np = of_get_child_by_name(chip->dev->of_node, "clocks");
+ if (!clk_np) {
+ dev_err(&pdev->dev, "could not find clock sub-node\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ for (i = 0; i < PM800_CLKS_NUM; i++) {
+ if (!clks_init[i].name)
+ continue; /* Skip clocks not present in some devices */
+
+ of_property_read_string_index(clk_np, "clock-output-names", i,
+ &clks_init[i].name);
+ }
+
+ return clk_np;
+}
+
+static int pm800_clk_probe(struct platform_device *pdev)
+{
+ struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+ struct pm800_clk *pm800_clks;
+ struct clk_init_data *clks_init;
+ static struct clk **clk_table;
+ static struct clk_onecell_data *of_clk_data;
+ int i, ret;
+
+ pm800_clks = devm_kcalloc(&pdev->dev, PM800_CLKS_NUM,
+ sizeof(*pm800_clks), GFP_KERNEL);
+ if (!pm800_clks)
+ return -ENOMEM;
+
+ clk_table = devm_kcalloc(&pdev->dev, PM800_CLKS_NUM,
+ sizeof(struct clk *), GFP_KERNEL);
+ if (!clk_table)
+ return -ENOMEM;
+
+ switch (platform_get_device_id(pdev)->driver_data) {
+ case CHIP_PM800:
+ clks_init = pm800_clks_init;
+ break;
+ case CHIP_PM860:
+ clks_init = pm860_clks_init;
+ break;
+ default:
+ dev_err(&pdev->dev, "Invalid device type\n");
+ return -EINVAL;
+ }
+
+ /* Store clocks of_node in first element of pm800_clks array */
+ pm800_clks->clk_np = pm800_clk_parse_dt(pdev, clks_init);
+ if (IS_ERR(pm800_clks->clk_np))
+ return PTR_ERR(pm800_clks->clk_np);
+
+ of_clk_data = devm_kzalloc(&pdev->dev, sizeof(*of_clk_data),
GFP_KERNEL);
+ if (!of_clk_data) {
+ ret = -ENOMEM;
+ goto err_clk_np;
+ }
+
+ for (i = 0; i < PM800_CLKS_NUM; i++) {
+ if (!clks_init[i].name)
+ continue; /* Skip clocks not present in some devices */
+
+ pm800_clks[i].chip = chip;
+ pm800_clks[i].hw.init = &clks_init[i];
+ /*
+ * As of now, mask and shift formula below works for both
+ * 88PM800 and it's family of devices,
+ *
+ * PM800_RTC_MISC2:
+ * 1:0 = CK_32K_OUT1_SEL
+ * 3:2 = CK_32K_OUT2_SEL
+ * 5:4 = CK_32K_OUT3_SEL
+ */
+ pm800_clks[i].shift = i * 2;
+ pm800_clks[i].mask = PM800_32K_OUTX_SEL_MASK <<
pm800_clks[i].shift;
+ pm800_clks[i].reg = PM800_RTC_MISC2;
+
+ pm800_clks[i].clk = devm_clk_register(&pdev->dev,
+ &pm800_clks[i].hw);
+ if (IS_ERR(pm800_clks[i].clk)) {
+ dev_err(&pdev->dev, "Fail to register : %s\n",
+ clks_init[i].name);
+ ret = PTR_ERR(pm800_clks[i].clk);
+ goto err;
+ }
+
+ pm800_clks[i].lookup = clkdev_create(pm800_clks[i].clk,
+ clks_init[i].name, NULL);
+ if (!pm800_clks[i].lookup) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ clk_table[i] = pm800_clks[i].clk;
+ }
+
+ of_clk_data->clks = clk_table;
+ of_clk_data->clk_num = PM800_CLKS_NUM;
+ ret = of_clk_add_provider(pm800_clks->clk_np, of_clk_src_onecell_get,
+ of_clk_data);
+ if (ret) {
+ dev_err(&pdev->dev, "Fail to add OF clk provider : %d\n", ret);
+ goto err;
+ }
+
+ /* Common for all 32KHz clock output */
+ ret = pm800_init_clk(&pm800_clks[0]);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to initialize clk : %d\n", ret);
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, pm800_clks);
+
+ return 0;
+
+err:
+ for (i = 0; i < PM800_CLKS_NUM; i++) {
+ if (pm800_clks[i].lookup)
+ clkdev_drop(pm800_clks[i].lookup);
+ }
+err_clk_np:
+ /* Drop the reference obtained in pm800_clk_parse_dt */
+ of_node_put(pm800_clks[0].clk_np);
+
+ return ret;
+}
+
+static int pm800_clk_remove(struct platform_device *pdev)
+{
+ struct pm800_clk *pm800_clks = platform_get_drvdata(pdev);
+ int i;
+
+ of_clk_del_provider(pm800_clks[0].clk_np);
+ /* Drop the reference obtained in pm800_clk_parse_dt */
+ of_node_put(pm800_clks[0].clk_np);
+
+ for (i = 0; i < PM800_CLKS_NUM; i++) {
+ if (pm800_clks[i].lookup)
+ clkdev_drop(pm800_clks[i].lookup);
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id pm800_clk_id[] = {
+ { "88pm800-clk", CHIP_PM800},
+ { "88pm860-clk", CHIP_PM860},
+ { },
+};
+MODULE_DEVICE_TABLE(platform, pm800_clk_id);
+
+static struct platform_driver pm800_clk_driver = {
+ .driver = {
+ .name = "88pm80x-clk",
+ },
+ .probe = pm800_clk_probe,
+ .remove = pm800_clk_remove,
+ .id_table = pm800_clk_id,
+};
+
+static int __init pm800_clk_init(void)
+{
+ return platform_driver_register(&pm800_clk_driver);
+}
+subsys_initcall(pm800_clk_init);
+
+static void __exit pm800_clk_cleanup(void)
+{
+ platform_driver_unregister(&pm800_clk_driver);
+}
+module_exit(pm800_clk_cleanup);
+
+MODULE_DESCRIPTION("88PM800 Clock Driver");
+MODULE_AUTHOR("Vaibhav Hiremath <vaibhav.hirem...@linaro.org>");
+MODULE_LICENSE("GPL");
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
