On Tue, Aug 18, 2015 at 11:30:25PM +0800, Chen Yu wrote: > Since Surface Pro 3 does not follow the specs of "Windows ACPI Design > Guide for SoC Platform", code in drivers/input/misc/soc_array.c can > not detect these buttons on it. According to bios implementation, > Surface Pro 3 encapsulates these buttons in a device named "VGBI", > with _HID "MSHW0028". When any of the buttons is pressed, a specify > ACPI notification code for this button will be delivered to "VGBI". For > example, if power button is pressed down, ACPI notification code of 0xc6 > will be sent by Notify(VGBI, 0xc6). > > This patch leverages "VGBI" to distinguish different ACPI notification > code from Power button, Home button, Volume button, then dispatches these > code to input layer. Lid is already covered by acpi button driver, so > there's no need to rewrite. > > Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=84651 > Tested-by: Ethan Schoonover <e...@ethanschoonover.com> > Tested-by: Peter Amidon <psa.pu...@picnicpark.org> > Tested-by: Donavan Lance <tusklah...@gmail.com> > Tested-by: Stephen Just <stephenj...@gmail.com> > Signed-off-by: Chen Yu <yu.c.c...@intel.com>
Joe, you provided a lot of review, are you happy with this version? Rafael, any concerns over the justification to use ACPI instead of platform_driver/i2c_driver as described in the comment block below? Chen, a couple more nitpics below. No need to resend if Joe and Rafael have no objections. I'll correct and queue. For now, queued to testing. Thanks! > --- > v4: > - Add following code in driver's probe callback: > if (strncmp(acpi_device_bid(device), SURFACE_BUTTON_OBJ_NAME, > strlen(SURFACE_BUTTON_OBJ_NAME))) > return -ENODEV; > to make sure only device object name of 'VGBI' will load this driver. > Because it is reported that, Surface 3(no Pro) also has a device with > hid MSHW0028, but it is not a button device. > > v3: > - Revert handle_surface_button_notify and keep original > 'switch/case' in surface_button_notify. Add/fix some > comments for surface_button_notify. > > v2: > - Introduce MACRO handle_surface_button_notify to make > it pairing the PRESS and RELEASE cases, convert dev_info > to dev_info_ratelimited when in error condition. > > --- > MAINTAINERS | 5 + > drivers/platform/x86/Kconfig | 5 + > drivers/platform/x86/Makefile | 1 + > drivers/platform/x86/surfacepro3_button.c | 215 > ++++++++++++++++++++++++++++++ > 4 files changed, 226 insertions(+) > create mode 100644 drivers/platform/x86/surfacepro3_button.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 569568f..eacaa41 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -6721,6 +6721,11 @@ T: git git://git.monstr.eu/linux-2.6-microblaze.git > S: Supported > F: arch/microblaze/ > > +MICROSOFT SURFACE PRO 3 BUTTON DRIVER > +M: Chen Yu <yu.c.c...@intel.com> It's typical to include the list here as well: L: platform-driver-...@vger.kernel.org > +S: Supported > +F: drivers/platform/x86/surfacepro3_button.c Also, spaces should have been tabs to be consistent with existing whitespace usage in MAINTAINERS. Consider displaying whitespace in your editor if you don't already. > + > MICROTEK X6 SCANNER > M: Oliver Neukum <oli...@neukum.org> > S: Maintained > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig > index 6dc13e4..c69bb70 100644 > --- a/drivers/platform/x86/Kconfig > +++ b/drivers/platform/x86/Kconfig > @@ -919,4 +919,9 @@ config INTEL_PMC_IPC > The PMC is an ARC processor which defines IPC commands for communication > with other entities in the CPU. > > +config SURFACE_PRO3_BUTTON > + tristate "Power/home/volume buttons driver for Microsoft Surface Pro 3 > tablet" > + depends on ACPI && INPUT > + ---help--- > + This driver handles the power/home/volume buttons on the Microsoft > Surface Pro 3 tablet. > endif # X86_PLATFORM_DEVICES > diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile > index dda95a9..ada5128 100644 > --- a/drivers/platform/x86/Makefile > +++ b/drivers/platform/x86/Makefile > @@ -60,3 +60,4 @@ obj-$(CONFIG_INTEL_SMARTCONNECT) += intel-smartconnect.o > obj-$(CONFIG_PVPANIC) += pvpanic.o > obj-$(CONFIG_ALIENWARE_WMI) += alienware-wmi.o > obj-$(CONFIG_INTEL_PMC_IPC) += intel_pmc_ipc.o > +obj-$(CONFIG_SURFACE_PRO3_BUTTON) += surfacepro3_button.o > diff --git a/drivers/platform/x86/surfacepro3_button.c > b/drivers/platform/x86/surfacepro3_button.c > new file mode 100644 > index 0000000..6c6f11c > --- /dev/null > +++ b/drivers/platform/x86/surfacepro3_button.c > @@ -0,0 +1,215 @@ > +/* > + * power/home/volume button support for > + * Microsoft Surface Pro 3 tablet. > + * > + * (C) Copyright 2015 Intel Corporation Intel standard copyright notice: Copyright (c) 2015, Intel Corporation. All rights reserved. But the (c) generally always goes after Copyright -- Darren Hart Intel Open Source Technology Center -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
