On 08/27/2015 09:26 PM, Krzysztof Kozlowski wrote:
> W dniu 27.08.2015 o 18:29, Jaehoon Chung pisze:
>> Currently vmmc's property is wrong.
>> If it needs to control two supplies, then it has to use vmmc/vqmmc-supply.
>> (Card supply power and I/O Line supply Power.)
>>
>> Signed-off-by: Jaehoon Chung <jh80.ch...@samsung.com>
>> ---
>> arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 7 ++++---
>> 1 file changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
>> b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
>> index ca7d168..4ddabfd 100644
>> --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
>> +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
>> @@ -461,10 +461,10 @@
>> &mshc_0 {
>> pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
>> pinctrl-names = "default";
>> - vmmc-supply = <&ldo20_reg &buck8_reg>;
>> + vmmc-supply = <&ldo20_reg>;
>> + vqmmc-supply = <&buck8_reg>;
>
> Shouldn't this be reversed? LDO20 has 1.8V and it goes to MMC connector,
> so it should be VQMMC?
If my schematics is right thing, buck8 is used LAN card power.
I will send after removing buck8_reg. how about?
Anyway, Thanks for pointing out. :)
I don't know who this regulator applied. I have guessed that it used for eMMC.
Sorry for guessing.
Best Regards,
Jaehoon Chung
>
> In the same time I can't find on schematics where BUCK8 goes...
>
> The SDHCI_2 node below looks good.
>
> Best regards,
> Krzysztof
>
>> mmc-pwrseq = <&emmc_pwrseq>;
>> status = "okay";
>> -
>> num-slots = <1>;
>> broken-cd;
>> card-detect-delay = <200>;
>> @@ -485,7 +485,8 @@
>> bus-width = <4>;
>> pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
>> pinctrl-names = "default";
>> - vmmc-supply = <&ldo4_reg &ldo21_reg>;
>> + vmmc-supply = <&ldo21_reg>;
>> + vqmmc-supply = <&ldo4_reg>;
>> cd-gpios = <&gpk2 2 0>;
>> cd-inverted;
>> status = "okay";
>>
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
