ST's platforms often have multiple co-processors (usually ST40s or ST231s) on-board. This provides the Linux-side infrastructure to flash and boot them successfully. This set has been tested on an STiH410-B2120.
v1 = v2: - Remove Linux implementation specific comment from binding document - Force debugfs '0' to shutdown co-processor - rather than !1 - Supply more detailed commit message - Propagate errors back from .stop() - Review GPL wording - Supply original author's SoBs Lee Jones (4): ARM: STiH407: Add nodes for RemoteProc remoteproc: dt: Provide bindings for ST's Remote Processor Controller driver remoteproc: Supply controller driver for ST's Remote Processors remoteproc: debugfs: Add ability to boot remote processor using debugfs .../devicetree/bindings/remoteproc/st-rproc.txt | 35 +++ arch/arm/boot/dts/stih407-family.dtsi | 48 ++++ drivers/remoteproc/Kconfig | 9 + drivers/remoteproc/Makefile | 1 + drivers/remoteproc/remoteproc_debugfs.c | 29 ++ drivers/remoteproc/st_remoteproc.c | 301 +++++++++++++++++++++ 6 files changed, 423 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/st-rproc.txt create mode 100644 drivers/remoteproc/st_remoteproc.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/