Hi Heiko,
在 2015/9/1 22:24, Heiko Stuebner 写道:
Am Dienstag, 1. September 2015, 14:01:28 schrieb Yakir Yang:
Rockchip have three clocks for dp controller, we leave pclk_edp
to analogix_dp driver control, and keep the sclk_edp_24m and
sclk_edp in platform driver.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v4:
- Remove some deprecated DT properties in rockchip dp document.
Changes in v3:
- Take Thierry Reding and Heiko suggest, leave "sclk_edp_24m" to rockchip
dp phy driver which name to "24m", and leave "sclk_edp" to analogix dp
core driver which name to "dp", and leave "pclk_edp" to rockchip dp
platform driver which name to "pclk".
- Take Heiko suggest, add devicetree binding document.
- Take Heiko suggest, remove "rockchip,panel" DT property, take use of
remote point to get panel node.
- Add the new function point analogix_dp_platdata.get_modes init.
Changes in v2:
- Take Heiko suggest, get panel node with remote-endpoint method,
and create devicetree binding for driver.
- Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m",
leave those clock to rockchip dp phy driver.
.../bindings/video/analogix_dp-rockchip.txt | 74 ++++
drivers/gpu/drm/rockchip/Kconfig | 9 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 389
+++++++++++++++++++++ 4 files changed, 473 insertions(+)
create mode 100644
Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt create
mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
diff --git
a/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt new file
mode 100644
index 0000000..502483e
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
@@ -0,0 +1,74 @@
+Rockchip RK3288 specific extensions to the Analogix Display Port
+================================
+
+Required properties:
+- compatible: "rockchip,rk3288-edp";
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+ of memory mapped region.
+
+- clock-names: from common clock binding:
+ Required elements: "dp" "pclk"
+
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+
+- reset-names: Must include the name "dp"
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: contain a port node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+- phys (required)
+- phy-names (required)
+- hpd-gpios (optional)
+---------------------------------------------------------------------------
---- +
+Example:
+ dp-controller: dp@ff970000 {
+ compatible = "rockchip,rk3288-dp";
+ reg = <0xff970000 0x4000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
+ clock-names = "dp", "pclk";
+ phys = <&dp_phy>;
+ phy-names = "dp";
+
+ rockchip,grf = <&grf>;
+ resets = <&cru 111>;
+ reset-names = "dp";
+
+ status = "disabled";
+
+ ports {
+ edp_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_edp>;
+ };
+ edp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_edp>;
+ };
+ };
+
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_out_panel: endpoint {
+ reg = <0>;
+ remote-endpoint = <&panel_in_edp>
+ };
+ };
+ };
+ };
+
just a nit right now, because "git am" mentioned it:
git am \[PATCH\ v4\ 08_16\]\ drm_rockchip_dp_add\ rockchip\ platform\ dp\
driver.mbox
[...]/linux-rockchip/.git/rebase-apply/patch:108: new blank line at EOF.
+
meaning you're adding an empty line at the end :-)
Oh, thanks, I have saw this too when I apply this on linux-next
branch, but I haven't see the log very careful at that time, and
".git/rebase-apply/patch" just empty, so I just go ahead and
forget to fix this one.
Thanks for your remind,
- Yakir
Heiko
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
