On Fri, Aug 21, 2015 at 01:45:35PM +0300, Roger Quadros wrote: > As both omap2 onenand and omap2 nand driver modules are > named the same i.e. "omap2.ko", only one of them gets shipped > during MODPOST if both are configured as loadable modules. > > To avoid this ambiguity let's ship the omap2 nand > driver as "omap2_nand.ko" > > Reported by Pierre Neyron via github > https://github.com/beagleboard/linux/issues/40 > > Cc: Robert Nelson <[email protected]> > Signed-off-by: Roger Quadros <[email protected]> > --- > drivers/mtd/nand/Makefile | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile > index 1f897ec..075a027 100644 > --- a/drivers/mtd/nand/Makefile > +++ b/drivers/mtd/nand/Makefile > @@ -26,7 +26,8 @@ obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o > obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o > obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o > obj-$(CONFIG_MTD_NAND_GPIO) += gpio.o > -obj-$(CONFIG_MTD_NAND_OMAP2) += omap2.o > +omap2_nand-objs := omap2.o > +obj-$(CONFIG_MTD_NAND_OMAP2) += omap2_nand.o
Pushed to l2-mtd.git. I suppose this one should go out for 4.3, as there's little downside to it, and it's kind of a bugfix. Brian > obj-$(CONFIG_MTD_NAND_OMAP_BCH_BUILD) += omap_elm.o > obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o > obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o > -- > 2.1.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
