Today all architectures expect 3 generate an asm-offsets.h file.
The exceptions are: frv, m32r, sparc64
Most architectures uses a name similar to asm_offsets.h with small
differences. A few uses asm-consts.h and a few uses '-' instead of '_'.
I suggest moving all the logic required to build the asm-offsets.h file
to a common places and do proper search&replace in architectures to make
the naming consitent. For frv, m32r and sparc64 we will need to create a
dummy file until they start using asm-offsets.h
The input file is consistently named asm-offsets.c so I plan to use the
name asm-offsets.h all over the place.
Sample patch for i386 (without renaming) below.
Notice that the chunk deleted from arch/i386/Makefile will be the same
for all architectures.
And as an added bonus introducing the below we finally get all
dependencies automatically tracked for the asm-offsets.h file.
This had slipped my mind for a long time but I was remineded when
I thougt about what dependencies could have been missed when using
bisect support in git.
If there is no objections I will see if I can have it ready before -rc1.
It's the dependency thing that want me to have is added soon.
The Kbuild file in the top-level directory is planned to be extended over
time. For now it contains only the asm-offsets stuff.
Sam
Kbuild | 40 ++++++++++++++++++++++++++++++++++++++++
Makefile | 37 ++++++++++---------------------------
arch/i386/Makefile | 9 ---------
3 files changed, 50 insertions(+), 36 deletions(-)
diff --git a/Kbuild b/Kbuild
new file mode 100644
--- /dev/null
+++ b/Kbuild
@@ -0,0 +1,40 @@
+#
+# Kbuild for top-level directory of the kernel
+# This file takes care of the following:
+# 1) Generate asm-offsets.h
+
+# 1) Generate asm-offsets.h
+#
+
+offsets-file := include/asm-$(ARCH)/asm_offsets.h
+
+always := $(offsets-file)
+targets := $(offsets-file)
+targets += arch/$(ARCH)/kernel/asm-offsets.s
+
+quiet_cmd_offsets = GEN $@
+define cmd_offsets
+ cat $< | \
+ (set -e; \
+ echo "#ifndef __ASM_OFFSETS_H__"; \
+ echo "#define __ASM_OFFSETS_H__"; \
+ echo "/*"; \
+ echo " * DO NOT MODIFY."; \
+ echo " *"; \
+ echo " * This file was generated by $(srctree)/Kbuild"; \
+ echo " *"; \
+ echo " */"; \
+ echo ""; \
+ sed -ne "/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /*
\3 */:; s:->::; p;}"; \
+ echo ""; \
+ echo "#endif" ) > $@
+endef
+
+# We use internal kbuild rules to avoid the "is up to date" message from make
+arch/$(ARCH)/kernel/asm-offsets.s: arch/$(ARCH)/kernel/asm-offsets.c FORCE
+ $(Q)mkdir -p $(dir $@)
+ $(call if_changed_dep,cc_s_c)
+
+$(srctree)/$(offsets-file): arch/$(ARCH)/kernel/asm-offsets.s Kbuild
+ $(call cmd,offsets)
+
diff --git a/Makefile b/Makefile
--- a/Makefile
+++ b/Makefile
@@ -776,14 +776,14 @@ $(vmlinux-dirs): prepare-all scripts
# A multi level approach is used. prepare1 is updated first, then prepare0.
# prepare-all is the collection point for the prepare targets.
-.PHONY: prepare-all prepare prepare0 prepare1 prepare2
+.PHONY: prepare-all prepare prepare0 prepare1 prepare2 prepare3
-# prepare2 is used to check if we are building in a separate output directory,
+# preparei3 is used to check if we are building in a separate output directory,
# and if so do:
# 1) Check that make has not been executed in the kernel src $(srctree)
# 2) Create the include2 directory, used for the second asm symlink
-prepare2:
+prepare3:
ifneq ($(KBUILD_SRC),)
@echo ' Using $(srctree) as source for kernel'
$(Q)if [ -f $(srctree)/.config ]; then \
@@ -795,16 +795,19 @@ ifneq ($(KBUILD_SRC),)
$(Q)ln -fsn $(srctree)/include/asm-$(ARCH) include2/asm
endif
-# prepare1 creates a makefile if using a separate output directory
-prepare1: prepare2 outputmakefile
+# prepare2 creates a makefile if using a separate output directory
+prepare2: prepare3 outputmakefile
-prepare0: prepare1 include/linux/version.h include/asm \
+prepare1: prepare2 include/linux/version.h include/asm \
include/config/MARKER
ifneq ($(KBUILD_MODULES),)
$(Q)rm -rf $(MODVERDIR)
$(Q)mkdir -p $(MODVERDIR)
endif
+prepare0: prepare1 FORCE
+ $(Q)$(MAKE) $(build)=$(srctree)
+
# All the preparing..
prepare-all: prepare0 prepare
@@ -949,26 +952,6 @@ modules modules_install: FORCE
endif # CONFIG_MODULES
-# Generate asm-offsets.h
-# ---------------------------------------------------------------------------
-
-define filechk_gen-asm-offsets
- (set -e; \
- echo "#ifndef __ASM_OFFSETS_H__"; \
- echo "#define __ASM_OFFSETS_H__"; \
- echo "/*"; \
- echo " * DO NOT MODIFY."; \
- echo " *"; \
- echo " * This file was generated by arch/$(ARCH)/Makefile"; \
- echo " *"; \
- echo " */"; \
- echo ""; \
- sed -ne "/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /*
\3 */:; s:->::; p;}"; \
- echo ""; \
- echo "#endif" )
-endef
-
-
###
# Cleaning is done on three levels.
# make clean Delete most generated files
@@ -991,7 +974,7 @@ MRPROPER_FILES += .config .config.old in
#
clean: rm-dirs := $(CLEAN_DIRS)
clean: rm-files := $(CLEAN_FILES)
-clean-dirs := $(addprefix _clean_,$(vmlinux-alldirs))
+clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs))
.PHONY: $(clean-dirs) clean archclean
$(clean-dirs):
diff --git a/arch/i386/Makefile b/arch/i386/Makefile
--- a/arch/i386/Makefile
+++ b/arch/i386/Makefile
@@ -156,15 +156,6 @@ install: vmlinux
install kernel_install:
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
-prepare: include/asm-$(ARCH)/asm_offsets.h
-CLEAN_FILES += include/asm-$(ARCH)/asm_offsets.h
-
-arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \
- include/config/MARKER
-
-include/asm-$(ARCH)/asm_offsets.h: arch/$(ARCH)/kernel/asm-offsets.s
- $(call filechk,gen-asm-offsets)
-
archclean:
$(Q)$(MAKE) $(clean)=arch/i386/boot
