[PATCH] w1: Added DS2433 driver.
Work by Ben Gardner <[EMAIL PROTECTED]>.
Signed-off-by: Evgeniy Polyakov <[EMAIL PROTECTED]>
Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]>
---
commit 80895392c83e54653540e72e7d40573aac7ee690
tree 3fb57983caf779f0648baebf18672f232a3c8c58
parent 7c8f5703de91ade517d4fd6c3cc8e08dbba2b739
author Evgeniy Polyakov <[EMAIL PROTECTED]> Thu, 11 Aug 2005 17:27:50 +0400
committer Greg Kroah-Hartman <[EMAIL PROTECTED]> Thu, 08 Sep 2005 14:41:27 -0700
drivers/w1/Kconfig | 7 ++
drivers/w1/Makefile | 1
drivers/w1/w1_ds2433.c | 222 ++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 230 insertions(+), 0 deletions(-)
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -54,4 +54,11 @@ config W1_SMEM
Say Y here if you want to connect 1-wire
simple 64bit memory rom(ds2401/ds2411/ds1990*) to you wire.
+config W1_DS2433
+ tristate "4kb EEPROM family support (DS2433)"
+ depends on W1
+ help
+ Say Y here if you want to use a 1-wire
+ 4kb EEPROM family device (DS2433).
+
endmenu
diff --git a/drivers/w1/Makefile b/drivers/w1/Makefile
--- a/drivers/w1/Makefile
+++ b/drivers/w1/Makefile
@@ -18,3 +18,4 @@ ds9490r-objs := dscore.o
obj-$(CONFIG_W1_DS9490_BRIDGE) += ds_w1_bridge.o
+obj-$(CONFIG_W1_DS2433) += w1_ds2433.o
diff --git a/drivers/w1/w1_ds2433.c b/drivers/w1/w1_ds2433.c
new file mode 100644
--- /dev/null
+++ b/drivers/w1/w1_ds2433.c
@@ -0,0 +1,222 @@
+/*
+ * w1_ds2433.c - w1 family 23 (DS2433) driver
+ *
+ * Copyright (c) 2005 Ben Gardner <[EMAIL PROTECTED]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the smems of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+
+#include "w1.h"
+#include "w1_io.h"
+#include "w1_int.h"
+#include "w1_family.h"
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ben Gardner <[EMAIL PROTECTED]>");
+MODULE_DESCRIPTION("w1 family 23 driver for DS2433, 4kb EEPROM");
+
+#define W1_EEPROM_SIZE 512
+#define W1_PAGE_SIZE 32
+#define W1_PAGE_BITS 5
+#define W1_PAGE_MASK 0x1F
+
+#define W1_F23_READ_EEPROM 0xF0
+#define W1_F23_WRITE_SCRATCH 0x0F
+#define W1_F23_READ_SCRATCH 0xAA
+#define W1_F23_COPY_SCRATCH 0x55
+
+/**
+ * Check the file size bounds and adjusts count as needed.
+ * This may not be needed if the sysfs layer checks bounds.
+ */
+static inline size_t w1_f23_fix_count(loff_t off, size_t count, size_t size)
+{
+ if (off > size)
+ return 0;
+
+ if ((off + count) > size)
+ return (size - off);
+
+ return count;
+}
+
+static ssize_t w1_f23_read_bin(struct kobject *kobj, char *buf, loff_t off,
size_t count)
+{
+ struct w1_slave *sl = kobj_to_w1_slave(kobj);
+ u8 wrbuf[3];
+
+ if ((count = w1_f23_fix_count(off, count, W1_EEPROM_SIZE)) == 0)
+ return 0;
+
+ atomic_inc(&sl->refcnt);
+ if (down_interruptible(&sl->master->mutex)) {
+ count = 0;
+ goto out_dec;
+ }
+
+ /* read directly from the EEPROM */
+ if (w1_reset_select_slave(sl)) {
+ count = -EIO;
+ goto out_up;
+ }
+
+ wrbuf[0] = W1_F23_READ_EEPROM;
+ wrbuf[1] = off & 0xff;
+ wrbuf[2] = off >> 8;
+ w1_write_block(sl->master, wrbuf, 3);
+ w1_read_block(sl->master, buf, count);
+
+out_up:
+ up(&sl->master->mutex);
+out_dec:
+ atomic_dec(&sl->refcnt);
+
+ return count;
+}
+
+/**
+ * Writes to the scratchpad and reads it back for verification.
+ * The master must be locked.
+ *
+ * @param sl The slave structure
+ * @param addr Address for the write
+ * @param len length must be <= (W1_PAGE_SIZE - (addr & W1_PAGE_MASK))
+ * @param data The data to write
+ * @return 0=Success -1=failure
+ */
+static int w1_f23_write(struct w1_slave *sl, int addr, int len, const u8 *data)
+{
+ u8 wrbuf[4];
+ u8 rdbuf[W1_PAGE_SIZE + 3];
+ u8 es = (addr + len - 1) & 0x1f;
+
+ /* Write the data to the scratchpad */
+ if (w1_reset_select_slave(sl))
+ return -1;
+
+ wrbuf[0] = W1_F23_WRITE_SCRATCH;
+ wrbuf[1] = addr & 0xff;
+ wrbuf[2] = addr >> 8;
+
+ w1_write_block(sl->master, wrbuf, 3);
+ w1_write_block(sl->master, data, len);
+
+ /* Read the scratchpad and verify */
+ if (w1_reset_select_slave(sl))
+ return -1;
+
+ w1_write_8(sl->master, W1_F23_READ_SCRATCH);
+ w1_read_block(sl->master, rdbuf, len + 3);
+
+ /* Compare what was read against the data written */
+ if ((rdbuf[0] != wrbuf[1]) || (rdbuf[1] != wrbuf[2]) ||
+ (rdbuf[2] != es) || (memcmp(data, &rdbuf[3], len) != 0))
+ return -1;
+
+ /* Copy the scratchpad to EEPROM */
+ if (w1_reset_select_slave(sl))
+ return -1;
+
+ wrbuf[0] = W1_F23_COPY_SCRATCH;
+ wrbuf[3] = es;
+ w1_write_block(sl->master, wrbuf, 4);
+
+ /* Sleep for 5 ms to wait for the write to complete */
+ msleep(5);
+
+ /* Reset the bus to wake up the EEPROM (this may not be needed) */
+ w1_reset_bus(sl->master);
+
+ return 0;
+}
+
+static ssize_t w1_f23_write_bin(struct kobject *kobj, char *buf, loff_t off,
+ size_t count)
+{
+ struct w1_slave *sl = kobj_to_w1_slave(kobj);
+ int addr, len, idx;
+
+ if ((count = w1_f23_fix_count(off, count, W1_EEPROM_SIZE)) == 0)
+ return 0;
+
+ atomic_inc(&sl->refcnt);
+ if (down_interruptible(&sl->master->mutex)) {
+ count = 0;
+ goto out_dec;
+ }
+
+ /* Can only write data to one page at a time */
+ idx = 0;
+ while (idx < count) {
+ addr = off + idx;
+ len = W1_PAGE_SIZE - (addr & W1_PAGE_MASK);
+ if (len > (count - idx))
+ len = count - idx;
+
+ if (w1_f23_write(sl, addr, len, &buf[idx]) < 0) {
+ count = -EIO;
+ goto out_up;
+ }
+ idx += len;
+ }
+
+out_up:
+ up(&sl->master->mutex);
+out_dec:
+ atomic_dec(&sl->refcnt);
+
+ return count;
+}
+
+static struct bin_attribute w1_f23_bin_attr = {
+ .attr = {
+ .name = "eeprom",
+ .mode = S_IRUGO | S_IWUSR,
+ .owner = THIS_MODULE,
+ },
+ .size = W1_EEPROM_SIZE,
+ .read = w1_f23_read_bin,
+ .write = w1_f23_write_bin,
+};
+
+static int w1_f23_add_slave(struct w1_slave *sl)
+{
+ return sysfs_create_bin_file(&sl->dev.kobj, &w1_f23_bin_attr);
+}
+
+static void w1_f23_remove_slave(struct w1_slave *sl)
+{
+ sysfs_remove_bin_file(&sl->dev.kobj, &w1_f23_bin_attr);
+}
+
+static struct w1_family_ops w1_f23_fops = {
+ .add_slave = w1_f23_add_slave,
+ .remove_slave = w1_f23_remove_slave,
+};
+
+static struct w1_family w1_family_23 = {
+ .fid = W1_EEPROM_DS2433,
+ .fops = &w1_f23_fops,
+};
+
+static int __init w1_f23_init(void)
+{
+ return w1_register_family(&w1_family_23);
+}
+
+static void __exit w1_f23_fini(void)
+{
+ w1_unregister_family(&w1_family_23);
+}
+
+module_init(w1_f23_init);
+module_exit(w1_f23_fini);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
