Stefan Smietanowski wrote: > Mathias Adam wrote: > > Currently serial8250_set_termios() refuses to program a baud rate larger > > than uartclk/16. However the 16C950 supports baud rates up to uartclk/4. > > This worked already with Linux 2.4 so the biggest part of this patch was > > simply taken from there and adapted to 2.6. > > - unsigned int baud, quot; > > + unsigned int baud, quot, max_baud; > ^^^^^^^^ > > - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); > > + MAX_baud = (up->port.type == PORT_16C950 ? port->uartclk/4 : > > port->uartclk/16); > ^^^^^^^^ > > Did you even compile test this?
Oops, I really really wonder how THIS could have happened as I just attached my existing patch file (which was and still is correct) without touching it - at least that's what I thought... Sorry! Mathias Adam I hope everything's alright this time: --- linux-2.6.13-org/drivers/serial/8250.c 2005-08-29 01:41:01.000000000 +0200 +++ linux-2.6.13/drivers/serial/8250.c 2005-09-09 02:16:49.000000000 +0200 @@ -1665,7 +1665,7 @@ struct uart_8250_port *up = (struct uart_8250_port *)port; unsigned char cval, fcr = 0; unsigned long flags; - unsigned int baud, quot; + unsigned int baud, quot, max_baud; switch (termios->c_cflag & CSIZE) { case CS5: @@ -1697,9 +1697,28 @@ /* * Ask the core to calculate the divisor for us. */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + max_baud = (up->port.type == PORT_16C950 ? port->uartclk/4 : port->uartclk/16); + baud = uart_get_baud_rate(port, termios, old, 0, max_baud); quot = serial8250_get_divisor(port, baud); + /* + * 16C950 supports additional prescaler ratios between 1:16 and 1:4 + * thus increasing max baud rate to uartclk/4. The following was taken + * from kernel 2.4 by Mathias Adam <[EMAIL PROTECTED]> to make the Socket + * Bluetooth CF Card work under 2.6.13. + */ + if (up->port.type == PORT_16C950) { + unsigned int baud_base = port->uartclk/16; + if (baud <= port->uartclk/16) + serial_icr_write(up, UART_TCR, 0); + else if (baud <= port->uartclk/8) { + serial_icr_write(up, UART_TCR, 0x8); + } else if (baud <= port->uartclk/4) { + serial_icr_write(up, UART_TCR, 0x4); + } else + serial_icr_write(up, UART_TCR, 0); + } + /* * Oxford Semi 952 rev B workaround */ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/