On 9 September 2015 at 15:24, Ezequiel Garcia <ezequ...@vanguardiasur.com.ar> wrote: > On 08 Sep 10:10 AM, Alex Smith wrote: >> Add a driver for NAND devices connected to the NEMC on JZ4780 SoCs, as >> well as the hardware BCH controller. DMA is not currently implemented. >> >> While older 47xx SoCs also have a BCH controller, they are incompatible >> with the one in the 4780 due to differing register/bit positions, which >> would make implementing a common driver for them quite messy. >> >> Signed-off-by: Alex Smith <alex.sm...@imgtec.com> >> Cc: Zubair Lutfullah Kakakhel <zubair.kakak...@imgtec.com> >> Cc: David Woodhouse <dw...@infradead.org> >> Cc: Brian Norris <computersforpe...@gmail.com> >> Cc: linux-...@lists.infradead.org >> Cc: linux-kernel@vger.kernel.org >> --- >> v4 -> v5: >> - Bump RB_DELAY up to be sufficient for the driver to work without a >> busy GPIO available. >> - Use readl_poll_timeout instead of custom polling loop. >> - Remove useless printks. >> - Change a BUG_ON to WARN_ON. >> - Remove use of of_translate_address(), use standard platform resource >> APIs. >> - Add DRV_NAME define to avoid duplication of the same string. >> >> v3 -> v4: >> - Rebase to 4.2-rc4 >> - Change ECC_HW_OOB_FIRST to ECC_HW, reading OOB first is not necessary. >> - Fix argument to get_device() in jz4780_bch_get() >> >> v2 -> v3: >> - Rebase to 4.0-rc6 >> - Reflect binding changes >> - get/put_device in bch get/release >> - Removed empty .remove() callback >> - Removed .owner >> - Set mtd->dev.parent >> >> v1 -> v2: >> - Fixed module license macro >> - Rebase to 4.0-rc3 >> --- >> drivers/mtd/nand/Kconfig | 7 + >> drivers/mtd/nand/Makefile | 1 + >> drivers/mtd/nand/jz4780_bch.c | 348 +++++++++++++++++++++++++++++++++++++ >> drivers/mtd/nand/jz4780_bch.h | 42 +++++ >> drivers/mtd/nand/jz4780_nand.c | 378 >> +++++++++++++++++++++++++++++++++++++++++ >> 5 files changed, 776 insertions(+) >> create mode 100644 drivers/mtd/nand/jz4780_bch.c >> create mode 100644 drivers/mtd/nand/jz4780_bch.h >> create mode 100644 drivers/mtd/nand/jz4780_nand.c >> > [..] >> + >> +static int jz4780_nand_init_chips(struct jz4780_nand *nand, >> + struct platform_device *pdev) >> +{ >> + struct device *dev = &pdev->dev; >> + struct jz4780_nand_chip *chip; >> + const __be32 *prop; >> + struct resource *res; >> + int i = 0; >> + >> + /* >> + * Iterate over each bank assigned to this device and request >> resources. >> + * The bank numbers may not be consecutive, but nand_scan_ident() >> + * expects chip numbers to be, so fill out a consecutive array of chips >> + * which map chip number to actual bank number. >> + */ >> + while ((prop = of_get_address(dev->of_node, i, NULL, NULL))) { >> + chip = &nand->chips[i]; >> + chip->bank = of_read_number(prop, 1); >> + >> + jz4780_nemc_set_type(nand->dev, chip->bank, >> + JZ4780_NEMC_BANK_NAND); >> + >> + res = platform_get_resource(pdev, IORESOURCE_MEM, i); >> + chip->base = devm_ioremap_resource(dev, res); >> + if (IS_ERR(chip->base)) { >> + dev_err(dev, "failed to map bank %u: %ld\n", >> + chip->bank, PTR_ERR(chip->base)); > > You don't need to print anything on devm_ioremap_resource errors. > > The rest looks good: > > Reviewed-by: Ezequiel Garcia <ezequ...@vanguardiasur.com.ar>
Thanks Ezequiel, I'll resend with the printk removed soon. Alex > -- > Ezequiel Garcia, VanguardiaSur > www.vanguardiasur.com.ar -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/