This patch series adds support for the Cygnus PCIe PHY This patch series is based on Linux v4.3-rc1 and is avaliable in: https://github.com/Broadcom/cygnus-linux/tree/cygnus-pcie-phy-v4
Changes from v3: - Modify the driver to use child node to represent each PCIe PHY - Update device tree binding document and examples accordingly - Add owner filed in phy ops Changes from v2: - Dropped MDC/MDIO bus driver since it's not needed to enable/disable the analog-front-end of the PCIe Serdes on Cygnus - Optimized delay waiting for PCIe analog-front-end to be fully enabled - Reduce the #phy-cell to 1 since now the MDIO PHY ID is not required Changes from v1: - Move the MDC/MDIO bus driver from drivers/phy/* to drivers/bus/* - Make the PCIe PHY device node child node of the MDIO bus - Change the PCIe PHY driver to tristate so it can be compiled as a module - Other minor changes Ray Jui (2): dt-bindings: Add Cygnus PCIe PHY binding doc phy: cygnus: pcie: Add Cygnus PCIe PHY support .../bindings/phy/brcm,cygnus-pcie-phy.txt | 47 +++++ drivers/phy/Kconfig | 9 + drivers/phy/Makefile | 1 + drivers/phy/phy-bcm-cygnus-pcie.c | 209 +++++++++++++++++++++ 4 files changed, 266 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt create mode 100644 drivers/phy/phy-bcm-cygnus-pcie.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
