On 2015年09月17日 17:47, Heiko Stübner wrote:
Hi,Am Donnerstag, 17. September 2015, 16:28:54 schrieb Xing Zheng:Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng<zhengx...@rock-chips.com>missing a dt-bindings document in a separate patch. See "dt-bindings: add documentation of rk3668 clock controller" (http://lists.infradead.org/pipermail/linux-rockchip/2015-July/003396.html) for comparison.
Yes, I sent a dt-bindings document in patch 5: "dt-bindings: add documentation of rk3036 clock controller",and I think I will adjust the order of document before "Add the clock tree..."
for rk3036.
--- Changes in v2: None drivers/clk/rockchip/Makefile | 1 + drivers/clk/rockchip/clk-rk3036.c | 504 +++++++++++++++++++++++++++++++++++++ drivers/clk/rockchip/clk.h | 30 +++ 3 files changed, 535 insertions(+) create mode 100644 drivers/clk/rockchip/clk-rk3036.c diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile index b27edd6..d599829 100644 --- a/drivers/clk/rockchip/Makefile +++ b/drivers/clk/rockchip/Makefile @@ -10,6 +10,7 @@ obj-y += clk-inverter.o obj-y += clk-mmc-phase.o obj-$(CONFIG_RESET_CONTROLLER) += softrst.o +obj-y += clk-rk3036.o obj-y += clk-rk3188.o obj-y += clk-rk3288.o obj-y += clk-rk3368.o diff --git a/drivers/clk/rockchip/clk-rk3036.c b/drivers/clk/rockchip/clk-rk3036.c new file mode 100644 index 0000000..724d467 --- /dev/null +++ b/drivers/clk/rockchip/clk-rk3036.c @@ -0,0 +1,504 @@ +/* + * Copyright (c) 2014 MundoReader S.L. + * Author: Heiko Stuebner<he...@sntech.de> + * + * Copyright (c) 2015 Rockchip Electronics Co. Ltd. + * Author: Xing Zheng<zhengx...@rock-chips.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include<linux/clk-provider.h> +#include<linux/of.h> +#include<linux/of_address.h> +#include<linux/syscore_ops.h> +#include<dt-bindings/clock/rk3036-cru.h> +#include "clk.h" + +enum rk3036_plls { + apll, dpll, gpll, +}; + +static struct rockchip_pll_rate_table rk3036_pll_rates[] = { + /* _mhz, _refdiv, _fbdiv, _postdiv1, _postdiv2, _dsmpd, _frac */ + RK3036_PLL_RATE(1608000000, 1, 67, 1, 1, 1, 0), + RK3036_PLL_RATE(1584000000, 1, 66, 1, 1, 1, 0), + RK3036_PLL_RATE(1560000000, 1, 65, 1, 1, 1, 0), + RK3036_PLL_RATE(1536000000, 1, 64, 1, 1, 1, 0), + RK3036_PLL_RATE(1512000000, 1, 63, 1, 1, 1, 0), + RK3036_PLL_RATE(1488000000, 1, 62, 1, 1, 1, 0), + RK3036_PLL_RATE(1464000000, 1, 61, 1, 1, 1, 0), + RK3036_PLL_RATE(1440000000, 1, 60, 1, 1, 1, 0), + RK3036_PLL_RATE(1416000000, 1, 59, 1, 1, 1, 0), + RK3036_PLL_RATE(1392000000, 1, 58, 1, 1, 1, 0), + RK3036_PLL_RATE(1368000000, 1, 57, 1, 1, 1, 0), + RK3036_PLL_RATE(1344000000, 1, 56, 1, 1, 1, 0), + RK3036_PLL_RATE(1320000000, 1, 55, 1, 1, 1, 0), + RK3036_PLL_RATE(1296000000, 1, 54, 1, 1, 1, 0), + RK3036_PLL_RATE(1272000000, 1, 53, 1, 1, 1, 0), + RK3036_PLL_RATE(1248000000, 1, 52, 1, 1, 1, 0), + RK3036_PLL_RATE(1200000000, 1, 50, 1, 1, 1, 0), + RK3036_PLL_RATE(1188000000, 2, 99, 1, 1, 1, 0), + RK3036_PLL_RATE(1104000000, 1, 46, 1, 1, 1, 0), + RK3036_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0), + RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0), + RK3036_PLL_RATE(1000000000, 6, 500, 2, 1, 1, 0), + RK3036_PLL_RATE( 984000000, 1, 82, 2, 1, 1, 0), + RK3036_PLL_RATE( 960000000, 1, 80, 2, 1, 1, 0), + RK3036_PLL_RATE( 936000000, 1, 78, 2, 1, 1, 0), + RK3036_PLL_RATE( 912000000, 1, 76, 2, 1, 1, 0), + RK3036_PLL_RATE( 900000000, 4, 300, 2, 1, 1, 0), + RK3036_PLL_RATE( 888000000, 1, 74, 2, 1, 1, 0), + RK3036_PLL_RATE( 864000000, 1, 72, 2, 1, 1, 0), + RK3036_PLL_RATE( 840000000, 1, 70, 2, 1, 1, 0), + RK3036_PLL_RATE( 816000000, 1, 68, 2, 1, 1, 0), + RK3036_PLL_RATE( 800000000, 6, 400, 2, 1, 1, 0), + RK3036_PLL_RATE( 700000000, 6, 350, 2, 1, 1, 0), + RK3036_PLL_RATE( 696000000, 1, 58, 2, 1, 1, 0), + RK3036_PLL_RATE( 600000000, 1, 75, 3, 1, 1, 0), + RK3036_PLL_RATE( 594000000, 2, 99, 2, 1, 1, 0), + RK3036_PLL_RATE( 504000000, 1, 63, 3, 1, 1, 0), + RK3036_PLL_RATE( 500000000, 6, 250, 2, 1, 1, 0), + RK3036_PLL_RATE( 408000000, 1, 68, 2, 2, 1, 0), + RK3036_PLL_RATE( 312000000, 1, 52, 2, 2, 1, 0), + RK3036_PLL_RATE( 216000000, 1, 72, 4, 2, 1, 0), + RK3036_PLL_RATE( 96000000, 1, 64, 4, 4, 1, 0), + RK3036_PLL_RATE(0, 1, 0, 1, 1, 1, 0),you shouldn't need a "0" rate entry I guess
Done.
Did I? There are not xin24m_plldiv and CRU_CLKSEL_CON4 register in my rk3036 TRM...+ { /* sentinel */ }, +}; + +#define RK3036_DIV_CPU_MASK 0x1f +#define RK3036_DIV_CPU_SHIFT 8 + +#define RK3036_DIV_PERI_MASK 0xf +#define RK3036_DIV_PERI_SHIFT 0 +#define RK3036_DIV_ACLK_MASK 0x7 +#define RK3036_DIV_ACLK_SHIFT 4 +#define RK3036_DIV_HCLK_MASK 0x3 +#define RK3036_DIV_HCLK_SHIFT 8 +#define RK3036_DIV_PCLK_MASK 0x7 +#define RK3036_DIV_PCLK_SHIFT 12 + +#define RK3036_CLKSEL1(_core_periph_div) \ + { \ + .reg = RK2928_CLKSEL_CON(1), \ + .val = HIWORD_UPDATE(_core_periph_div, RK3036_DIV_PERI_MASK, \ + RK3036_DIV_PERI_SHIFT) \ + } + +#define RK3036_CPUCLK_RATE(_prate, _core_periph_div) \ + { \ + .prate = _prate, \ + .divs = { \ + RK3036_CLKSEL1(_core_periph_div), \ + }, \ + } + +static struct rockchip_cpuclk_rate_table rk3036_cpuclk_rates[] __initdata = { + RK3036_CPUCLK_RATE(816000000, 4), + RK3036_CPUCLK_RATE(600000000, 4), + RK3036_CPUCLK_RATE(312000000, 4), +}; + +static const struct rockchip_cpuclk_reg_data rk3036_cpuclk_data = { + .core_reg = RK2928_CLKSEL_CON(0), + .div_core_shift = 0, + .div_core_mask = 0x1f, + .mux_core_shift = 7, +}; + +PNAME(mux_pll_p) = { "xin24m", "xin24m" };looks like you overlooked the divider? Like DIV(0, "xin24m_plldiv", "xin24m", 0, RK2928_CLKSEL_CON(4), 8, 5, DFLAGS), PNAME(mux_pll_p) = { "xin24m_plldiv", "xin24m" };
+ +PNAME(mux_armclk_p) = { "apll", "gpll_armclk" }; +PNAME(mux_busclk_p) = { "apll", "dpll_cpu", "gpll_cpu" };[...]+ /* + * Clock-Architecture Diagram 3 + */ + + /* aclk_cpu gates */ + GATE(0, "sclk_intmem", "aclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 12, GFLAGS), + GATE(0, "aclk_strc_sys", "aclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 10, GFLAGS), + + /* hclk_cpu gates */ + GATE(HCLK_ROM, "hclk_rom", "hclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 6, GFLAGS), + + /* pclk_cpu gates */ + GATE(PCLK_GRF, "pclk_grf", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 4, GFLAGS), + GATE(PCLK_DDRUPCTL, "pclk_ddrupctl", "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 7, GFLAGS), + GATE(ACLK_VCODEC, "pclk_acodec", "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 14, GFLAGS), + GATE(PCLK_HDMI, "pclk_hdmi", "pclk_cpu", 0, RK2928_CLKGATE_CON(3), 8, GFLAGS), + + /* aclk_vio gates */ + GATE(ACLK_VIO, "aclk_vio", "aclk_disp1_pre", 0, + RK2928_CLKGATE_CON(6), 13, GFLAGS), + GATE(ACLK_LCDC, "aclk_lcdc", "aclk_disp1_pre", 0, + RK2928_CLKGATE_CON(9), 6, GFLAGS), + + GATE(HCLK_VIO_BUS, "hclk_vio_bus", "hclk_disp_pre", 0, + RK2928_CLKGATE_CON(6), 12, GFLAGS), + GATE(HCLK_LCDC, "hclk_lcdc", "hclk_disp_pre", 0, + RK2928_CLKGATE_CON(9), 5, GFLAGS), + + /* aclk_video gates */ + GATE(HCLK_LCDC, "hclk_vcodec", "hclk_disp_pre", 0, + RK2928_CLKGATE_CON(3), 12, GFLAGS),in big gate-block from diagram 3, please stick to the one-line format, like the rest of the gates here (diagram3 only)
Done.
+ + /* xin24m gates */ + GATE(SCLK_PVTM_CORE, "sclk_pvtm_core", "xin24m", 0, RK2928_CLKGATE_CON(10), 0, GFLAGS), + GATE(SCLK_PVTM_GPU, "sclk_pvtm_gpu", "xin24m", 0, RK2928_CLKGATE_CON(10), 1, GFLAGS), + + /* aclk_peri gates */ + GATE(0, "aclk_peri_axi_matrix", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 3, GFLAGS), + GATE(0, "aclk_cpu_peri", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 2, GFLAGS), + GATE(ACLK_DMAC2, "aclk_dmac2", "aclk_peri", 0, RK2928_CLKGATE_CON(5), 1, GFLAGS), + GATE(0, "aclk_peri_niu", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 15, GFLAGS), + + /* hclk_peri gates */ + GATE(0, "hclk_peri_matrix", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 0, GFLAGS), + GATE(0, "hclk_usb_peri", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 13, GFLAGS), + GATE(0, "hclk_peri_arbi", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 14, GFLAGS), + GATE(HCLK_NANDC, "hclk_nandc", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 9, GFLAGS), + GATE(HCLK_SDMMC, "hclk_sdmmc", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 10, GFLAGS), + GATE(HCLK_SDIO, "hclk_sdio", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 11, GFLAGS), + GATE(HCLK_EMMC, "hclk_emmc", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 0, GFLAGS), + GATE(HCLK_OTG0, "hclk_otg0", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 13, GFLAGS), + GATE(HCLK_OTG1, "hclk_otg1", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(7), 13, GFLAGS), + GATE(HCLK_I2S, "hclk_i2s", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(7), 2, GFLAGS), + GATE(0, "hclk_sfc", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 14, GFLAGS), + GATE(0, "hclk_mac", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 15, GFLAGS), + + /* pclk_peri gates */ + GATE(0, "pclk_peri_matrix", "pclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 1, GFLAGS), + GATE(0, "pclk_efuse", "pclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 2, GFLAGS), + GATE(PCLK_TIMER, "pclk_timer0", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 7, GFLAGS), + GATE(PCLK_PWM, "pclk_pwm", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 10, GFLAGS), + GATE(PCLK_SPI, "pclk_spi", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 12, GFLAGS), + GATE(PCLK_WDT, "pclk_wdt", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 15, GFLAGS), + GATE(PCLK_UART0, "pclk_uart0", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 0, GFLAGS), + GATE(PCLK_UART1, "pclk_uart1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 1, GFLAGS), + GATE(PCLK_UART2, "pclk_uart2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 2, GFLAGS), + GATE(PCLK_I2C0, "pclk_i2c0", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 4, GFLAGS), + GATE(PCLK_I2C1, "pclk_i2c1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 5, GFLAGS), + GATE(PCLK_I2C2, "pclk_i2c2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 6, GFLAGS), + GATE(PCLK_GPIO0, "pclk_gpio0", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 9, GFLAGS), + GATE(PCLK_GPIO1, "pclk_gpio1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 10, GFLAGS), + GATE(PCLK_GPIO2, "pclk_gpio2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 11, GFLAGS), +}; + +static const char *const rk3036_critical_clocks[] __initconst = { + "aclk_cpu", + "aclk_peri", + "hclk_peri", + "pclk_peri", +}; + +static void __init rk3036_clk_init(struct device_node *np) +{ + void __iomem *reg_base; + struct clk *clk; + + reg_base = of_iomap(np, 0); + if (!reg_base) { + pr_err("%s: could not map cru region\n", __func__); + return; + } + + rockchip_clk_init(np, reg_base, CLK_NR_CLKS); + + /* xin12m is created by an cru-internal divider */ + clk = clk_register_fixed_factor(NULL, "xin12m", "xin24m", 0, 1, 2); + if (IS_ERR(clk)) + pr_warn("%s: could not register clock xin12m: %ld\n", + __func__, PTR_ERR(clk)); + + clk = clk_register_fixed_factor(NULL, "usb480m", "xin24m", 0, 20, 1); + if (IS_ERR(clk)) + pr_warn("%s: could not register clock usb480m: %ld\n", + __func__, PTR_ERR(clk)); + + clk = clk_register_fixed_factor(NULL, "ddrphy", "ddrphy2x", 0, 1, 2); + if (IS_ERR(clk)) + pr_warn("%s: could not register clock ddrphy: %ld\n", + __func__, PTR_ERR(clk)); + + clk = clk_register_fixed_factor(NULL, "hclk_vcodec_pre", + "aclk_vcodec", 0, 1, 4); + if (IS_ERR(clk)) + pr_warn("%s: could not register clock hclk_vcodec_pre: %ld\n", + __func__, PTR_ERR(clk)); + + clk = clk_register_fixed_factor(NULL, "sclk_macref_out", + "hclk_peri_src", 0, 1, 2); + if (IS_ERR(clk)) + pr_warn("%s: could not register clock sclk_macref_out: %ld\n", + __func__, PTR_ERR(clk)); + + rockchip_clk_register_plls(rk3036_pll_clks, + ARRAY_SIZE(rk3036_pll_clks), + -1); + rockchip_clk_register_branches(rk3036_clk_branches, + ARRAY_SIZE(rk3036_clk_branches)); + rockchip_clk_protect_critical(rk3036_critical_clocks, + ARRAY_SIZE(rk3036_critical_clocks)); + + rockchip_clk_register_armclk(ARMCLK, "armclk", + mux_armclk_p, ARRAY_SIZE(mux_armclk_p), + &rk3036_cpuclk_data, rk3036_cpuclk_rates, + ARRAY_SIZE(rk3036_cpuclk_rates)); + + rockchip_register_softrst(np, 9, reg_base + RK2928_SOFTRST_CON(0), + ROCKCHIP_SOFTRST_HIWORD_MASK); + + rockchip_register_restart_notifier(RK2928_GLB_SRST_FST); +} +CLK_OF_DECLARE(rk3036_cru, "rockchip,rk3036-cru", rk3036_clk_init); diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h index dc8ecb2..6603c07 100644 --- a/drivers/clk/rockchip/clk.h +++ b/drivers/clk/rockchip/clk.h @@ -2,6 +2,9 @@ * Copyright (c) 2014 MundoReader S.L. * Author: Heiko Stuebner<he...@sntech.de> * + * Copyright (c) 2015 Rockchip Electronics Co. Ltd. + * Author: Xing Zheng<zhengx...@rock-chips.com> + * * based on * * samsung/clk.h @@ -40,6 +43,13 @@ struct clk; #define RK2928_SOFTRST_CON(x) ((x) * 0x4 + 0x110) #define RK2928_MISC_CON 0x134 +#define RK3036_SDMMC_CON0 0x144 +#define RK3036_SDMMC_CON1 0x148 +#define RK3036_SDIO_CON0 0x14c +#define RK3036_SDIO_CON1 0x150 +#define RK3036_EMMC_CON0 0x154 +#define RK3036_EMMC_CON1 0x158 + #define RK3288_PLL_CON(x) RK2928_PLL_CON(x) #define RK3288_MODE_CON 0x50 #define RK3288_CLKSEL_CON(x) ((x) * 0x4 + 0x60) @@ -75,6 +85,7 @@ struct clk; enum rockchip_pll_type { pll_rk3066, + pll_rk3036,this should be part of the addition of the pll type (your patch4, and should be reordered accordingly) Also please all 3036 before the 3066 entry
OK, done.
}; #define RK3066_PLL_RATE(_rate, _nr, _nf, _no) \ @@ -95,12 +106,31 @@ enum rockchip_pll_type { .nb = _nb, \ } +#define RK3036_PLL_RATE(_rate, _refdiv, _fbdiv, _postdiv1, \ + _postdiv2, _dsmpd, _frac) \ +{ \ + .rate = _rate##U, \ + .fbdiv = _fbdiv, \ + .postdiv1 = _postdiv1, \ + .refdiv = _refdiv, \ + .postdiv2 = _postdiv2, \ + .dsmpd = _dsmpd, \ + .frac = _frac, \ +} + struct rockchip_pll_rate_table { unsigned long rate; unsigned int nr; unsigned int nf; unsigned int no; unsigned int nb; + /* for RK3036 */ + unsigned int fbdiv; + unsigned int postdiv1; + unsigned int refdiv; + unsigned int postdiv2; + unsigned int dsmpd; + unsigned int frac;same for these 2 ... should be part of the pll addition itself
Done.
}; /**
Thanks. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
