The macros KELVIN_TO_CELSIUS and CELSIUS_TO_KELVIN actually convert between deciKelvins and Celsius, so rename them to reflect that. While at it, use a statement expression in DECI_KELVIN_TO_CELSIUS to prevent expanding the argument multiple times and get rid of a few casts.
Signed-off-by: Rasmus Villemoes <[email protected]> --- Cleaning out old branches, I stumbled on this which apparently fell through the cracks [http://thread.gmane.org/gmane.linux.drivers.platform.x86.devel/5349]. The unit mismatch still bugs the physicist in me, so I'm resending. drivers/acpi/thermal.c | 12 ++++++------ drivers/platform/x86/asus-wmi.c | 2 +- drivers/platform/x86/intel_menlow.c | 8 ++++---- include/linux/thermal.h | 8 +++++--- 4 files changed, 16 insertions(+), 14 deletions(-) diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 30d8518b25fb..82707f9824ca 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -315,7 +315,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) if (crt == -1) { tz->trips.critical.flags.valid = 0; } else if (crt > 0) { - unsigned long crt_k = CELSIUS_TO_KELVIN(crt); + unsigned long crt_k = CELSIUS_TO_DECI_KELVIN(crt); /* * Allow override critical threshold */ @@ -351,7 +351,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) if (psv == -1) { status = AE_SUPPORT; } else if (psv > 0) { - tmp = CELSIUS_TO_KELVIN(psv); + tmp = CELSIUS_TO_DECI_KELVIN(psv); status = AE_OK; } else { status = acpi_evaluate_integer(tz->device->handle, @@ -431,7 +431,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) break; if (i == 1) tz->trips.active[0].temperature = - CELSIUS_TO_KELVIN(act); + CELSIUS_TO_DECI_KELVIN(act); else /* * Don't allow override higher than @@ -439,9 +439,9 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) */ tz->trips.active[i - 1].temperature = (tz->trips.active[i - 2].temperature < - CELSIUS_TO_KELVIN(act) ? + CELSIUS_TO_DECI_KELVIN(act) ? tz->trips.active[i - 2].temperature : - CELSIUS_TO_KELVIN(act)); + CELSIUS_TO_DECI_KELVIN(act)); break; } else { tz->trips.active[i].temperature = tmp; @@ -1105,7 +1105,7 @@ static int acpi_thermal_add(struct acpi_device *device) INIT_WORK(&tz->thermal_check_work, acpi_thermal_check_fn); pr_info(PREFIX "%s [%s] (%ld C)\n", acpi_device_name(device), - acpi_device_bid(device), KELVIN_TO_CELSIUS(tz->temperature)); + acpi_device_bid(device), DECI_KELVIN_TO_CELSIUS(tz->temperature)); goto end; free_memory: diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index efbc3f0c592b..bb80f7a29496 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -1318,7 +1318,7 @@ static ssize_t asus_hwmon_temp1(struct device *dev, if (err < 0) return err; - value = KELVIN_TO_CELSIUS((value & 0xFFFF)) * 1000; + value = DECI_KELVIN_TO_CELSIUS((value & 0xFFFF)) * 1000; return sprintf(buf, "%d\n", value); } diff --git a/drivers/platform/x86/intel_menlow.c b/drivers/platform/x86/intel_menlow.c index e8b46d2c468c..0a919d81662c 100644 --- a/drivers/platform/x86/intel_menlow.c +++ b/drivers/platform/x86/intel_menlow.c @@ -315,7 +315,7 @@ static ssize_t aux0_show(struct device *dev, result = sensor_get_auxtrip(attr->handle, 0, &value); - return result ? result : sprintf(buf, "%lu", KELVIN_TO_CELSIUS(value)); + return result ? result : sprintf(buf, "%lu", DECI_KELVIN_TO_CELSIUS(value)); } static ssize_t aux1_show(struct device *dev, @@ -327,7 +327,7 @@ static ssize_t aux1_show(struct device *dev, result = sensor_get_auxtrip(attr->handle, 1, &value); - return result ? result : sprintf(buf, "%lu", KELVIN_TO_CELSIUS(value)); + return result ? result : sprintf(buf, "%lu", DECI_KELVIN_TO_CELSIUS(value)); } static ssize_t aux0_store(struct device *dev, @@ -345,7 +345,7 @@ static ssize_t aux0_store(struct device *dev, if (value < 0) return -EINVAL; - result = sensor_set_auxtrip(attr->handle, 0, CELSIUS_TO_KELVIN(value)); + result = sensor_set_auxtrip(attr->handle, 0, CELSIUS_TO_DECI_KELVIN(value)); return result ? result : count; } @@ -364,7 +364,7 @@ static ssize_t aux1_store(struct device *dev, if (value < 0) return -EINVAL; - result = sensor_set_auxtrip(attr->handle, 1, CELSIUS_TO_KELVIN(value)); + result = sensor_set_auxtrip(attr->handle, 1, CELSIUS_TO_DECI_KELVIN(value)); return result ? result : count; } diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 157d366e761b..4014a59828fc 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -44,9 +44,11 @@ #define THERMAL_WEIGHT_DEFAULT 0 /* Unit conversion macros */ -#define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732 >= 0) ? \ - ((long)t-2732+5)/10 : ((long)t-2732-5)/10) -#define CELSIUS_TO_KELVIN(t) ((t)*10+2732) +#define DECI_KELVIN_TO_CELSIUS(t) ({ \ + long _t = (t); \ + ((_t-2732 >= 0) ? (_t-2732+5)/10 : (_t-2732-5)/10); \ +}) +#define CELSIUS_TO_DECI_KELVIN(t) ((t)*10+2732) #define DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(t, off) (((t) - (off)) * 100) #define DECI_KELVIN_TO_MILLICELSIUS(t) DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(t, 2732) #define MILLICELSIUS_TO_DECI_KELVIN_WITH_OFFSET(t, off) (((t) / 100) + (off)) -- 2.1.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
