Hi!
> On Wed, 2006-11-29 at 11:21 +0100, Mike Galbraith wrote:
> > > The serial console appears to be innocent. The suspend/resume methods
> > > for my 16550A serial port aren't even being _called_, apparently because
> > > pnp swiped ttyS0.
>
> (ahem, bad aim with mouse, resuming)
>
> Well, after further rummaging, the suspend/resume methods aren't being
> called because we're using 8250_pnp.c when CONFIG_PNP is set, and it
> doesn't have any :) The below works for me, though I'm not sure it's
> sufficient. If it is deemed sufficient, I'll submit it to Andrew.
>
> Add suspend/resume methods to 8250_pnp driver.
Patch looks okay to me... care to sign-it-off and submit it to akpm?
Pavel
> --- linux-2.6.19-rc6-mm2/drivers/serial/8250_pnp.c.org 2006-11-29
> 07:14:15.000000000 +0100
> +++ linux-2.6.19-rc6-mm2/drivers/serial/8250_pnp.c 2006-11-29
> 10:55:17.000000000 +0100
> @@ -464,11 +464,38 @@ static void __devexit serial_pnp_remove(
> serial8250_unregister_port(line - 1);
> }
>
> +#ifdef CONFIG_PM
> +static int serial_pnp_suspend(struct pnp_dev *dev, pm_message_t state)
> +{
> + long line = (long)pnp_get_drvdata(dev);
> +
> + if (!line)
> + return -ENODEV;
> + serial8250_suspend_port(line - 1);
> + return 0;
> +}
> +
> +static int serial_pnp_resume(struct pnp_dev *dev)
> +{
> + long line = (long)pnp_get_drvdata(dev);
> +
> + if (!line)
> + return -ENODEV;
> + serial8250_resume_port(line - 1);
> + return 0;
> +}
> +
> +#endif /* CONFIG_PM */
> +
> static struct pnp_driver serial_pnp_driver = {
> .name = "serial",
> - .id_table = pnp_dev_table,
> .probe = serial_pnp_probe,
> .remove = __devexit_p(serial_pnp_remove),
> +#ifdef CONFIG_PM
> + .suspend = serial_pnp_suspend,
> + .resume = serial_pnp_resume,
> +#endif
> + .id_table = pnp_dev_table,
> };
>
> static int __init serial8250_pnp_init(void)
>
>
>
>
>
--
Thanks for all the (sleeping) penguins.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
