On 10/05/2015 10:12 AM, Al Stone wrote:
On 10/05/2015 07:39 AM, Rafael J. Wysocki wrote:
On Wednesday, September 30, 2015 10:10:16 AM Al Stone wrote:
On 09/30/2015 03:00 AM, Hanjun Guo wrote:
On 2015/9/30 7:45, Al Stone wrote:
NB: this patch set is for use against the linux-pm bleeding edge branch.


[snip...]


For this patch set,

Reviewed-by: Hanjun Guo <hanjun....@linaro.org>

Thanks
Hanjun

Thanks, Hanjun!

Series applied, thanks!

Rafael


Thanks, Rafael!


Just decided to test out linux-next (to see the new nouveau cleanups). This change set prevents my Lenovo W510 from booting properly.

Reverting: 7494b0 "ACPI: add in a bad_madt_entry() function to eventually replace the macro"

Gets the system booting again. I'm attaching my dmesg from the failed boot, who wants the acpidump?
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.3.0-rc4-next-20151009-linux+ (s0be@anvil) (gcc 
version 4.9.3 (Gentoo 4.9.3 p1.1, pie-0.6.2) ) #271 SMP Sun Oct 11 16:37:37 PDT 
2015
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.3.0-rc4 
root=UUID=815266d6-a8b9-4f63-a593-02fde178263f ro net.ifnames=0 
rfkill.default_state=0 init=/sbin/init intel_iommu=on nouveau.pstate=1 
nouveau.config=NvClkMode=3 zram.zram_num_devices=4 zram.num_devices=4 ro
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bba7bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bba7c000-0x00000000bba81fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bba82000-0x00000000bbb47fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bbb48000-0x00000000bbb5afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bbb5b000-0x00000000bbbdbfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bbbdc000-0x00000000bbc0efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bbc0f000-0x00000000bbc5cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bbc5d000-0x00000000bbe67fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bbe68000-0x00000000bbee7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bbee8000-0x00000000bbf0efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bbf0f000-0x00000000bbf17fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bbf18000-0x00000000bbf1efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bbf1f000-0x00000000bbf6bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bbf6c000-0x00000000bbf79fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bbf7a000-0x00000000bbf7cfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bbf7d000-0x00000000bbf80fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bbf81000-0x00000000bbf81fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bbf82000-0x00000000bbf8afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bbf8b000-0x00000000bbf8bfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bbf8c000-0x00000000bbf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bbf9f000-0x00000000bbffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bbfff000-0x00000000bbffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bc000000-0x00000000bdffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: LENOVO 4318CTO/4318CTO, BIOS 6NET84WW (1.45 ) 10/03/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 disabled
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 100000000 mask F00000000 write-back
[    0.000000]   4 base 200000000 mask E00000000 write-back
[    0.000000]   5 base 400000000 mask FC0000000 write-back
[    0.000000]   6 base 0BC000000 mask FFE000000 uncachable
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] original variable MTRRs
[    0.000000] reg 1, base: 0GB, range: 2GB, type WB
[    0.000000] reg 2, base: 2GB, range: 1GB, type WB
[    0.000000] reg 3, base: 4GB, range: 4GB, type WB
[    0.000000] reg 4, base: 8GB, range: 8GB, type WB
[    0.000000] reg 5, base: 16GB, range: 1GB, type WB
[    0.000000] reg 6, base: 3008MB, range: 32MB, type UC
[    0.000000] total RAM covered: 16352M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 128M        num_reg: 6      lose 
cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3008MB, range: 32MB, type UC
[    0.000000] reg 3, base: 4GB, range: 4GB, type WB
[    0.000000] reg 4, base: 8GB, range: 8GB, type WB
[    0.000000] reg 5, base: 16GB, range: 1GB, type WB
[    0.000000] e820: update [mem 0xbc000000-0xbdffffff] usable ==> reserved
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbc000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x0216d000, 0x0216dfff] PGTABLE
[    0.000000] BRK [0x0216e000, 0x0216efff] PGTABLE
[    0.000000] BRK [0x0216f000, 0x0216ffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x43fe00000-0x43fffffff]
[    0.000000]  [mem 0x43fe00000-0x43fffffff] page 2M
[    0.000000] BRK [0x02170000, 0x02170fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x420000000-0x43fdfffff]
[    0.000000]  [mem 0x420000000-0x43fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbba7bfff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xbb9fffff] page 2M
[    0.000000]  [mem 0xbba00000-0xbba7bfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbba82000-0xbbb47fff]
[    0.000000]  [mem 0xbba82000-0xbbb47fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbbc0f000-0xbbc5cfff]
[    0.000000]  [mem 0xbbc0f000-0xbbc5cfff] page 4k
[    0.000000] BRK [0x02171000, 0x02171fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbbf0f000-0xbbf17fff]
[    0.000000]  [mem 0xbbf0f000-0xbbf17fff] page 4k
[    0.000000] BRK [0x02172000, 0x02172fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbbf1f000-0xbbf6bfff]
[    0.000000]  [mem 0xbbf1f000-0xbbf6bfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbbfff000-0xbbffffff]
[    0.000000]  [mem 0xbbfff000-0xbbffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x41fffffff]
[    0.000000]  [mem 0x100000000-0x41fffffff] page 2M
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6870 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000BBFF18B8 00009C (v01 LENOVO TP-6N    
00001450  LTP 00000000)
[    0.000000] ACPI: FACP 0x00000000BBFF1A00 0000F4 (v04 LENOVO TP-6N    
00001450 LNVO 00000001)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in 
FADT/Pm1aControlBlock: 16/32 (20150818/tbfadt-623)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for 
FADT/Pm1aControlBlock: 32, using default 16 (20150818/tbfadt-704)
[    0.000000] ACPI: DSDT 0x00000000BBFF1C9B 00CEAE (v01 LENOVO TP-6N    
00001450 MSFT 03000001)
[    0.000000] ACPI: FACS 0x00000000BBEE7000 000040
[    0.000000] ACPI: FACS 0x00000000BBEE7000 000040
[    0.000000] ACPI: SSDT 0x00000000BBFF1BB4 0000E7 (v01 LENOVO TP-6N    
00001450 MSFT 03000001)
[    0.000000] ACPI: ECDT 0x00000000BBFFEB49 000052 (v01 LENOVO TP-6N    
00001450 LNVO 00000001)
[    0.000000] ACPI: APIC 0x00000000BBFFEB9B 0000BC (v01 LENOVO TP-6N    
00001450 LNVO 00000001)
[    0.000000] ACPI: MCFG 0x00000000BBFFEC57 00003C (v01 LENOVO TP-6N    
00001450 LNVO 00000001)
[    0.000000] ACPI: HPET 0x00000000BBFFEC93 000038 (v01 LENOVO TP-6N    
00001450 LNVO 00000001)
[    0.000000] ACPI: ASF! 0x00000000BBFFEDBE 0000A4 (v16 LENOVO TP-6N    
00001450 PTL  00000001)
[    0.000000] ACPI: SLIC 0x00000000BBFFEE62 000176 (v01 LENOVO TP-6N    
00001450  LTP 00000000)
[    0.000000] ACPI: BOOT 0x00000000BBFFEFD8 000028 (v01 LENOVO TP-6N    
00001450  LTP 00000001)
[    0.000000] ACPI: SSDT 0x00000000BBEE591A 00084B (v01 LENOVO TP-6N    
00001450 INTL 20050513)
[    0.000000] ACPI: TCPA 0x00000000BBF8B000 000032 (v02 PTL     CRESTLN 
06040000      00005A52)
[    0.000000] ACPI: DMAR 0x00000000BBF81000 000068 (v01 INTEL  CP_FIELD 
00000001 INTL 00000001)
[    0.000000] ACPI: SSDT 0x00000000BBF7C000 0009F1 (v01 PmRef  CpuPm    
00003000 INTL 20060912)
[    0.000000] ACPI: SSDT 0x00000000BBF7B000 000259 (v01 PmRef  Cpu0Tst  
00003000 INTL 20060912)
[    0.000000] ACPI: SSDT 0x00000000BBF7A000 00049F (v01 PmRef  ApTst    
00003000 INTL 20060912)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: undefined version for either FADT 4.0 or MADT 1
[    0.000000] ACPI: Error parsing LAPIC address override entry
[    0.000000] ACPI: Invalid BIOS MADT, disabling ACPI
[    0.000000]  [ffffea0000000000-ffffea0010ffffff] PMD -> 
[ffff88042f600000-ffff88043f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000043fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bba7bfff]
[    0.000000]   node   0: [mem 0x00000000bba82000-0x00000000bbb47fff]
[    0.000000]   node   0: [mem 0x00000000bbc0f000-0x00000000bbc5cfff]
[    0.000000]   node   0: [mem 0x00000000bbf0f000-0x00000000bbf17fff]
[    0.000000]   node   0: [mem 0x00000000bbf1f000-0x00000000bbf6bfff]
[    0.000000]   node   0: [mem 0x00000000bbfff000-0x00000000bbffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000043fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043fffffff]
[    0.000000] On node 0 totalpages: 4176772
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11952 pages used for memmap
[    0.000000]   DMA32 zone: 764903 pages, LIFO batch:31
[    0.000000]   Normal zone: 53248 pages used for memmap
[    0.000000]   Normal zone: 3407872 pages, LIFO batch:31
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[    0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbba7c000-0xbba81fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbb48000-0xbbb5afff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbb5b000-0xbbbdbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbbdc000-0xbbc0efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbc5d000-0xbbe67fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbe68000-0xbbee7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbee8000-0xbbf0efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbf18000-0xbbf1efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbf6c000-0xbbf79fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbf7a000-0xbbf7cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbf7d000-0xbbf80fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbf81000-0xbbf81fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbf82000-0xbbf8afff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbf8b000-0xbbf8bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbf8c000-0xbbf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbf9f000-0xbbffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbc000000-0xbdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe000000-0xbf7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafefff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 
0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 
nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88043fc00000 s96472 r8192 
d30504 u2097152
[    0.000000] pcpu-alloc: s96472 r8192 d30504 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total 
pages: 4111487
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.3.0-rc4 
root=UUID=815266d6-a8b9-4f63-a593-02fde178263f ro net.ifnames=0 
rfkill.default_state=0 init=/sbin/init intel_iommu=on nouveau.pstate=1 
nouveau.config=NvClkMode=3 zram.zram_num_devices=4 zram.num_devices=4 ro
[    0.000000] DMAR: IOMMU enabled
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 
bytes)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 
bytes)
[    0.000000] Memory: 16336016K/16707088K available (5365K kernel code, 873K 
rwdata, 2592K rodata, 5816K init, 876K bss, 371072K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[    0.000000] NR_IRQS:4352 nr_irqs:32 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1728.880 MHz processor
[    0.000024] Calibrating delay loop (skipped), value calculated using timer 
frequency.. 3457.76 BogoMIPS (lpj=1728880)
[    0.000443] pid_max: default: 32768 minimum: 301
[    0.000721] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000938] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 
bytes)
[    0.001805] Initializing cgroup subsys io
[    0.002022] Initializing cgroup subsys memory
[    0.006846] Initializing cgroup subsys pids
[    0.007085] CPU: Physical Processor ID: 0
[    0.007293] CPU: Processor Core ID: 0
[    0.007503] mce: CPU supports 9 MCE banks
[    0.007742] CPU0: Thermal monitoring enabled (TM1)
[    0.007959] process: using mwait in idle threads
[    0.008171] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.008380] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.021041] Freeing SMP alternatives memory: 24K (ffffffff8208a000 - 
ffffffff82090000)
[    0.024830] ftrace: allocating 24434 entries in 96 pages
[    0.046467] smpboot: weird, boot CPU (#0) not listed by the BIOS
[    0.046679] smpboot: SMP motherboard not detected
[    0.046905] smpboot: SMP disabled
[    0.047114] DMAR: Host address width 36
[    0.047319] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[    0.047543] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 
ecap f020e2
[    0.047946] DMAR: RMRR base: 0x000000bbee9000 end: 0x000000bbefffff
[    0.251719] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, 
Intel PMU driver.
[    0.252235] perf_event_intel: CPU erratum AAJ80 worked around
[    0.252445] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.252656] ... version:                3
[    0.252866] ... bit width:              48
[    0.253071] ... generic registers:      4
[    0.253276] ... value mask:             0000ffffffffffff
[    0.253484] ... max period:             000000007fffffff
[    0.253693] ... fixed-purpose events:   3
[    0.253898] ... event mask:             000000070000000f
[    0.254387] x86: Booted up 1 node, 1 CPUs
[    0.254596] smpboot: Total of 1 processors activated (3457.76 BogoMIPS)
[    0.254934] devtmpfs: initialized
[    0.255733] PM: Registering ACPI NVS region [mem 0xbbb5b000-0xbbbdbfff] 
(528384 bytes)
[    0.256144] PM: Registering ACPI NVS region [mem 0xbbe68000-0xbbee7fff] 
(524288 bytes)
[    0.256552] PM: Registering ACPI NVS region [mem 0xbbf6c000-0xbbf79fff] 
(57344 bytes)
[    0.256946] PM: Registering ACPI NVS region [mem 0xbbf7d000-0xbbf80fff] 
(16384 bytes)
[    0.257331] PM: Registering ACPI NVS region [mem 0xbbf82000-0xbbf8afff] 
(36864 bytes)
[    0.257723] PM: Registering ACPI NVS region [mem 0xbbf8c000-0xbbf9efff] 
(77824 bytes)
[    0.258230] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, 
max_idle_ns: 1911260446275000 ns
[    0.258744] xor: measuring software checksum speed
[    0.268685]    prefetch64-sse:  4748.000 MB/sec
[    0.278682]    generic_sse:  4216.000 MB/sec
[    0.278890] xor: using function: prefetch64-sse (4748.000 MB/sec)
[    0.279146] RTC time:  0:53:00, date: 10/12/15
[    0.279545] NET: Registered protocol family 16
[    0.280109] cpuidle: using governor ladder
[    0.280321] cpuidle: using governor menu
[    0.280698] Simple Boot Flag at 0x35 set to 0x1
[    0.280944] ACPI FADT declares the system doesn't support PCIe ASPM, so 
disable it
[    0.281419] PCI: Using configuration type 1 for base access
[    0.300695] raid6: sse2x1   gen()  2894 MB/s
[    0.317684] raid6: sse2x1   xor()  2128 MB/s
[    0.334671] raid6: sse2x2   gen()  3472 MB/s
[    0.351670] raid6: sse2x2   xor()  2607 MB/s
[    0.368666] raid6: sse2x4   gen()  3843 MB/s
[    0.385662] raid6: sse2x4   xor()  2818 MB/s
[    0.385871] raid6: using algorithm sse2x4 gen() 3843 MB/s
[    0.386082] raid6: .... xor() 2818 MB/s, rmw enabled
[    0.386289] raid6: using ssse3x2 recovery algorithm
[    0.386522] ACPI: Interpreter disabled.
[    0.386844] vgaarb: loaded
[    0.387170] SCSI subsystem initialized
[    0.387425] libata version 3.00 loaded.
[    0.387565] PCI: Probing PCI hardware
[    0.387779] PCI: root bus 00: using default resources
[    0.387782] PCI: Probing PCI hardware (bus 00)
[    0.387829] PCI host bridge to bus 0000:00
[    0.388039] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.388252] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.388465] pci_bus 0000:00: No busn resource found for root bus, will use 
[bus 00-ff]
[    0.388865] pci 0000:00:00.0: [8086:d132] type 00 class 0x060000
[    0.388987] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
[    0.389045] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.389132] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[    0.389244] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[    0.389355] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[    0.389463] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[    0.389574] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[    0.389683] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[    0.389815] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    0.389862] pci 0000:00:16.0: reg 0x10: [mem 0xf2627800-0xf262780f 64bit]
[    0.389944] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.390058] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
[    0.390095] pci 0000:00:19.0: reg 0x10: [mem 0xf2600000-0xf261ffff]
[    0.390112] pci 0000:00:19.0: reg 0x14: [mem 0xf2625000-0xf2625fff]
[    0.390129] pci 0000:00:19.0: reg 0x18: [io  0x1820-0x183f]
[    0.390196] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.390291] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.390331] pci 0000:00:1a.0: reg 0x10: [mem 0xf2628000-0xf26283ff]
[    0.390423] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.390522] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.390564] pci 0000:00:1b.0: reg 0x10: [mem 0xf2620000-0xf2623fff 64bit]
[    0.390636] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.390742] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.390828] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.390866] pci 0000:00:1c.0: Enabling MPC IRBNCE
[    0.391082] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[    0.391381] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    0.391466] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.391506] pci 0000:00:1c.1: Enabling MPC IRBNCE
[    0.391723] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
[    0.392024] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[    0.392110] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.392145] pci 0000:00:1c.3: Enabling MPC IRBNCE
[    0.392360] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled
[    0.392665] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[    0.392746] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.392786] pci 0000:00:1c.4: Enabling MPC IRBNCE
[    0.393001] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
[    0.393304] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
[    0.393389] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.393429] pci 0000:00:1c.6: Enabling MPC IRBNCE
[    0.393644] pci 0000:00:1c.6: Intel PCH root port ACS workaround enabled
[    0.393946] pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400
[    0.394027] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.394066] pci 0000:00:1c.7: Enabling MPC IRBNCE
[    0.394277] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled
[    0.394570] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.394615] pci 0000:00:1d.0: reg 0x10: [mem 0xf2628400-0xf26287ff]
[    0.394714] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.394814] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.394953] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
[    0.395158] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[    0.395195] pci 0000:00:1f.2: reg 0x10: [io  0x1818-0x181f]
[    0.395211] pci 0000:00:1f.2: reg 0x14: [io  0x180c-0x180f]
[    0.395227] pci 0000:00:1f.2: reg 0x18: [io  0x1810-0x1817]
[    0.395243] pci 0000:00:1f.2: reg 0x1c: [io  0x1808-0x180b]
[    0.395258] pci 0000:00:1f.2: reg 0x20: [io  0x1840-0x185f]
[    0.395274] pci 0000:00:1f.2: reg 0x24: [mem 0xf2627000-0xf26277ff]
[    0.395321] pci 0000:00:1f.2: PME# supported from D3hot
[    0.395414] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.395441] pci 0000:00:1f.3: reg 0x10: [mem 0xf2628800-0xf26288ff 64bit]
[    0.395468] pci 0000:00:1f.3: reg 0x20: [io  0x1860-0x187f]
[    0.395639] pci 0000:01:00.0: [10de:0a3c] type 00 class 0x030000
[    0.395679] pci 0000:01:00.0: reg 0x10: [mem 0xcc000000-0xccffffff]
[    0.395698] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit 
pref]
[    0.395718] pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit 
pref]
[    0.395732] pci 0000:01:00.0: reg 0x24: [io  0x2000-0x207f]
[    0.395746] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[    0.395839] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.396049] vgaarb: device added: 
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.396463] pci 0000:01:00.1: [10de:0be2] type 00 class 0x040300
[    0.396496] pci 0000:01:00.1: reg 0x10: [mem 0xcdefc000-0xcdefffff]
[    0.396688] pci 0000:00:03.0: PCI bridge to [bus 01]
[    0.396900] pci 0000:00:03.0:   bridge window [io  0x2000-0x2fff]
[    0.396906] pci 0000:00:03.0:   bridge window [mem 0xcc000000-0xcdefffff]
[    0.396913] pci 0000:00:03.0:   bridge window [mem 0xce000000-0xdfffffff 
64bit pref]
[    0.396986] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.397323] pci 0000:03:00.0: [8086:0089] type 00 class 0x028000
[    0.397439] pci 0000:03:00.0: reg 0x10: [mem 0xf2000000-0xf2001fff 64bit]
[    0.397701] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.399695] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.399916] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf20fffff]
[    0.400000] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.400219] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.400225] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.400239] pci 0000:00:1c.3:   bridge window [mem 0xf2700000-0xf27fffff 
64bit pref]
[    0.400382] pci 0000:0d:00.0: [1180:e822] type 00 class 0x080500
[    0.400452] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[    0.400741] pci 0000:0d:00.0: reg 0x10: [mem 0xf2100000-0xf21000ff]
[    0.400871] pci 0000:0d:00.0: supports D1 D2
[    0.400875] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.401069] pci 0000:0d:00.1: [1180:e230] type 00 class 0x088000
[    0.401142] pci 0000:0d:00.1: reg 0x10: [mem 0xf2100400-0xf21004ff]
[    0.401272] pci 0000:0d:00.1: supports D1 D2
[    0.401276] pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.402737] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[    0.402952] pci 0000:00:1c.4:   bridge window [mem 0xf2100000-0xf21fffff]
[    0.403084] pci 0000:0f:00.0: [1033:0194] type 00 class 0x0c0330
[    0.403199] pci 0000:0f:00.0: reg 0x10: [mem 0xf2200000-0xf2201fff 64bit]
[    0.403406] pci 0000:0f:00.0: PME# supported from D0 D3hot D3cold
[    0.404695] pci 0000:00:1c.6: PCI bridge to [bus 0f-16]
[    0.404916] pci 0000:00:1c.6:   bridge window [mem 0xf2200000-0xf22fffff]
[    0.405069] pci 0000:17:00.0: [1180:e822] type 00 class 0x080500
[    0.405134] pci 0000:17:00.0: MMC controller base frequency changed to 50Mhz.
[    0.405418] pci 0000:17:00.0: reg 0x10: [mem 0xf2300000-0xf23000ff]
[    0.405548] pci 0000:17:00.0: supports D1 D2
[    0.405552] pci 0000:17:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.405755] pci 0000:17:00.3: [1180:e832] type 00 class 0x0c0010
[    0.405829] pci 0000:17:00.3: reg 0x10: [mem 0xf2300800-0xf2300fff]
[    0.405951] pci 0000:17:00.3: supports D1 D2
[    0.405956] pci 0000:17:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.407723] pci 0000:00:1c.7: PCI bridge to [bus 17-1e]
[    0.407942] pci 0000:00:1c.7:   bridge window [mem 0xf2300000-0xf23fffff]
[    0.408065] pci 0000:00:1e.0: PCI bridge to [bus 1f] (subtractive decode)
[    0.408289] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] 
(subtractive decode)
[    0.408294] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] 
(subtractive decode)
[    0.408349] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 1f
[    0.408381] PCI: root bus 04: using default resources
[    0.408385] PCI: Probing PCI hardware (bus 04)
[    0.408431] PCI host bridge to bus 0000:04
[    0.408640] pci_bus 0000:04: root bus resource [io  0x0000-0xffff]
[    0.408857] pci_bus 0000:04: root bus resource [mem 0x00000000-0xfffffffff]
[    0.409073] pci_bus 0000:04: No busn resource found for root bus, will use 
[bus 04-ff]
[    0.409458] pci_bus 0000:04: busn_res: can not insert [bus 04-ff] under 
domain [bus 00-ff] (conflicts with (null) [bus 00-1f])
[    0.409501] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
[    0.409507] pci_bus 0000:04: busn_res: can not insert [bus 04] under domain 
[bus 00-ff] (conflicts with (null) [bus 00-1f])
[    0.409698] PCI: pci_cache_line_size set to 64 bytes
[    0.410056] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.410060] e820: reserve RAM buffer [mem 0xbba7c000-0xbbffffff]
[    0.410066] e820: reserve RAM buffer [mem 0xbbb48000-0xbbffffff]
[    0.410071] e820: reserve RAM buffer [mem 0xbbc5d000-0xbbffffff]
[    0.410076] e820: reserve RAM buffer [mem 0xbbf18000-0xbbffffff]
[    0.410081] e820: reserve RAM buffer [mem 0xbbf6c000-0xbbffffff]
[    0.410468] clocksource: Switched to clocksource refined-jiffies
[    0.417601] pnp: PnP ACPI: disabled
[    0.421121] pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff 
pref]
[    0.421509] pci 0000:00:03.0: PCI bridge to [bus 01]
[    0.421724] pci 0000:00:03.0:   bridge window [io  0x2000-0x2fff]
[    0.421940] pci 0000:00:03.0:   bridge window [mem 0xcc000000-0xcdefffff]
[    0.422154] pci 0000:00:03.0:   bridge window [mem 0xce000000-0xdfffffff 
64bit pref]
[    0.422540] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.422765] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.422980] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf20fffff]
[    0.423198] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.423414] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.423635] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.423854] pci 0000:00:1c.3:   bridge window [mem 0xf2700000-0xf27fffff 
64bit pref]
[    0.424245] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[    0.424461] pci 0000:00:1c.4:   bridge window [mem 0xf2100000-0xf21fffff]
[    0.424688] pci 0000:00:1c.6: PCI bridge to [bus 0f-16]
[    0.424904] pci 0000:00:1c.6:   bridge window [mem 0xf2200000-0xf22fffff]
[    0.425125] pci 0000:00:1c.7: PCI bridge to [bus 17-1e]
[    0.425344] pci 0000:00:1c.7:   bridge window [mem 0xf2300000-0xf23fffff]
[    0.425570] pci 0000:00:1e.0: PCI bridge to [bus 1f]
[    0.425798] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.425802] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.425807] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.425811] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xcdefffff]
[    0.425815] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit 
pref]
[    0.425820] pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf20fffff]
[    0.425824] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
[    0.425828] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[    0.425832] pci_bus 0000:05: resource 2 [mem 0xf2700000-0xf27fffff 64bit 
pref]
[    0.425836] pci_bus 0000:0d: resource 1 [mem 0xf2100000-0xf21fffff]
[    0.425841] pci_bus 0000:0f: resource 1 [mem 0xf2200000-0xf22fffff]
[    0.425845] pci_bus 0000:17: resource 1 [mem 0xf2300000-0xf23fffff]
[    0.425849] pci_bus 0000:1f: resource 4 [io  0x0000-0xffff]
[    0.425853] pci_bus 0000:1f: resource 5 [mem 0x00000000-0xfffffffff]
[    0.425858] pci_bus 0000:04: resource 4 [io  0x0000-0xffff]
[    0.425862] pci_bus 0000:04: resource 5 [mem 0x00000000-0xfffffffff]
[    0.425908] NET: Registered protocol family 2
[    0.426377] TCP established hash table entries: 131072 (order: 8, 1048576 
bytes)
[    0.427443] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.428281] TCP: Hash tables configured (established 131072 bind 65536)
[    0.428526] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.428967] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.429460] NET: Registered protocol family 1
[    0.448816] pci 0000:01:00.0: Video device with shadowed ROM
[    0.456865] pci 0000:0f:00.0: xHCI BIOS handoff failed (BIOS bug ?) 00010401
[    0.457851] PCI: CLS 64 bytes, default 64
[    0.617371] DMAR: No ATSR found
[    0.617785] DMAR: dmar0: Using Queued invalidation
[    0.618012] DMAR: Setting RMRR:
[    0.618243] DMAR: Setting identity map for device 0000:00:1a.0 [0xbbee9000 - 
0xbbefffff]
[    0.618677] DMAR: Setting identity map for device 0000:00:1d.0 [0xbbee9000 - 
0xbbefffff]
[    0.619086] DMAR: Prepare 0-16MiB unity mapping for LPC
[    0.619309] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 
0xffffff]
[    0.619936] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    0.620221] iommu: Adding device 0000:00:00.0 to group 0
[    0.620451] iommu: Adding device 0000:00:03.0 to group 1
[    0.620727] iommu: Adding device 0000:00:08.0 to group 2
[    0.620953] iommu: Adding device 0000:00:08.1 to group 2
[    0.621178] iommu: Adding device 0000:00:08.2 to group 2
[    0.621402] iommu: Adding device 0000:00:08.3 to group 2
[    0.621645] iommu: Adding device 0000:00:10.0 to group 3
[    0.621873] iommu: Adding device 0000:00:10.1 to group 3
[    0.622106] iommu: Adding device 0000:00:16.0 to group 4
[    0.622332] iommu: Adding device 0000:00:19.0 to group 5
[    0.622559] iommu: Adding device 0000:00:1a.0 to group 6
[    0.622791] iommu: Adding device 0000:00:1b.0 to group 7
[    0.623019] iommu: Adding device 0000:00:1c.0 to group 8
[    0.623249] iommu: Adding device 0000:00:1c.1 to group 9
[    0.623476] iommu: Adding device 0000:00:1c.3 to group 10
[    0.623708] iommu: Adding device 0000:00:1c.4 to group 11
[    0.623939] iommu: Adding device 0000:00:1c.6 to group 12
[    0.624167] iommu: Adding device 0000:00:1c.7 to group 13
[    0.624394] iommu: Adding device 0000:00:1d.0 to group 14
[    0.624627] iommu: Adding device 0000:00:1e.0 to group 15
[    0.624872] iommu: Adding device 0000:00:1f.0 to group 16
[    0.625099] iommu: Adding device 0000:00:1f.2 to group 16
[    0.625326] iommu: Adding device 0000:00:1f.3 to group 16
[    0.625544] iommu: Adding device 0000:01:00.0 to group 1
[    0.625765] iommu: Adding device 0000:01:00.1 to group 1
[    0.625994] iommu: Adding device 0000:03:00.0 to group 17
[    0.626234] iommu: Adding device 0000:0d:00.0 to group 18
[    0.626462] iommu: Adding device 0000:0d:00.1 to group 18
[    0.626693] iommu: Adding device 0000:0f:00.0 to group 19
[    0.631528] iommu: Adding device 0000:17:00.0 to group 20
[    0.631755] iommu: Adding device 0000:17:00.3 to group 20
[    0.635167] platform rtc_cmos: registered platform RTC device (no PNP device 
found)
[    0.636115] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.636356] audit: initializing netlink subsys (disabled)
[    0.636585] audit: type=2000 audit(1444611180.511:1): initialized
[    0.640542] zbud: loaded
[    0.642301] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 
252)
[    0.642700] io scheduler noop registered
[    0.642910] io scheduler deadline registered
[    0.643180] io scheduler cfq registered (default)
[    0.644448] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[    0.644678] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.644892] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[    0.645106] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
[    0.645153] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.645374] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.645418] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.645655] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.645880] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.645928] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.646149] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.646195] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.646409] pci 0000:0d:00.0: Signaling PME through PCIe PME interrupt
[    0.646635] pci 0000:0d:00.1: Signaling PME through PCIe PME interrupt
[    0.646861] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.646923] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[    0.647138] pci 0000:0f:00.0: Signaling PME through PCIe PME interrupt
[    0.647356] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
[    0.647401] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
[    0.647630] pci 0000:17:00.0: Signaling PME through PCIe PME interrupt
[    0.647843] pci 0000:17:00.3: Signaling PME through PCIe PME interrupt
[    0.648065] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
[    0.648083] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.648321] pciehp 0000:00:1c.3:pcie04: Slot #3 AttnBtn- PwrCtrl- MRL- 
AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.648776] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[    0.648788] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.649013] intel_idle: MWAIT substates: 0x1120
[    0.649024] intel_idle: v0.4 model 0x1E
[    0.649026] intel_idle: lapic_timer_reliable_states 0x2
[    0.649217] xenfs: not registering filesystem on non-xen platform
[    0.649635] Failed to find cpu0 device node
[    0.649844] Unable to detect cache hierarchy from DT for CPU 0
[    0.653440] brd: module loaded
[    0.653878] zram: Added device: zram0
[    0.654318] zram: Added device: zram1
[    0.654723] zram: Added device: zram2
[    0.655156] zram: Added device: zram3
[    0.655462] ahci 0000:00:1f.2: version 3.0
[    0.655584] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.666076] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 
impl SATA mode
[    0.666465] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo 
pio slum part ems sxs apst 
[    0.672913] scsi host0: ahci
[    0.673285] scsi host1: ahci
[    0.673613] scsi host2: ahci
[    0.673941] scsi host3: ahci
[    0.674291] scsi host4: ahci
[    0.674617] scsi host5: ahci
[    0.674908] ata1: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627100 
irq 24
[    0.675322] ata2: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627180 
irq 24
[    0.675706] ata3: DUMMY
[    0.675907] ata4: DUMMY
[    0.676133] ata5: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627300 
irq 24
[    0.676523] ata6: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627380 
irq 24
[    0.677013] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.682555] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.682772] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.683190] mousedev: PS/2 mouse device common for all mice
[    0.683535] input: PC Speaker as /devices/platform/pcspkr/input/input1
[    0.683929] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: 
dm-de...@redhat.com
[    0.684582] Initializing XFRM netlink socket
[    0.685167] NET: Registered protocol family 10
[    0.685731] NET: Registered protocol family 17
[    0.685949] NET: Registered protocol family 15
[    0.686766] registered taskstats version 1
[    0.687084] zswap: loaded using pool lzo/zbud
[    0.687313] ------------[ cut here ]------------
[    0.687555] WARNING: CPU: 0 PID: 1 at mm/early_ioremap.c:91 
check_early_ioremap_leak+0x3f/0x45()
[    0.687940] Debug warning: early ioremap leak of 1 areas detected.
               please boot with early_ioremap_debug and report the dmesg.
[    0.688347] Modules linked in:
[    0.688579] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 
4.3.0-rc4-next-20151009-linux+ #271
[    0.688962] Hardware name: LENOVO 4318CTO/4318CTO, BIOS 6NET84WW (1.45 ) 
10/03/2012
[    0.689361]  0000000000000000 ffff88042d8afde8 ffffffff812ed22c 
ffff88042d8afe30
[    0.689847]  ffff88042d8afe20 ffffffff81056d88 ffffffff81b1e0a9 
ffff88042c76d401
[    0.690347]  ffffffff81b1e06a 0000000000000000 ffffffff81a11080 
ffff88042d8afe88
[    0.690830] Call Trace:
[    0.691053]  [<ffffffff812ed22c>] dump_stack+0x44/0x55
[    0.691266]  [<ffffffff81056d88>] warn_slowpath_common+0x9f/0xb8
[    0.691476]  [<ffffffff81b1e0a9>] ? check_early_ioremap_leak+0x3f/0x45
[    0.691688]  [<ffffffff81b1e06a>] ? early_ioremap_debug_setup+0x12/0x12
[    0.691901]  [<ffffffff81056de9>] warn_slowpath_fmt+0x48/0x50
[    0.692130]  [<ffffffff810020f5>] ? do_one_initcall+0x90/0x17a
[    0.692341]  [<ffffffff81b1e0a9>] check_early_ioremap_leak+0x3f/0x45
[    0.692552]  [<ffffffff81002152>] do_one_initcall+0xed/0x17a
[    0.692763]  [<ffffffff81af4fff>] kernel_init_freeable+0x10e/0x196
[    0.692977]  [<ffffffff81532eb2>] ? rest_init+0x79/0x79
[    0.693204]  [<ffffffff81532ec0>] kernel_init+0xe/0xda
[    0.693416]  [<ffffffff81538bcf>] ret_from_fork+0x3f/0x70
[    0.693626]  [<ffffffff81532eb2>] ? rest_init+0x79/0x79
[    0.693835] ---[ end trace dd833814130a8abe ]---
[    0.694147] input: AT Translated Set 2 keyboard as 
/devices/platform/i8042/serio0/input/input0
[    0.695549] Btrfs loaded
[    0.696437]   Magic number: 3:262:860
[    0.696677] hctosys: unable to open rtc device (rtc0)
[    0.697807] device-tree: Duplicate name in testcase-data, renamed to 
"duplicate-name#1"
[    0.699117] ### dt-test ### start of unittest - you will see error messages
[    0.699435] /testcase-data/phandle-tests/consumer-a: could not get 
#phandle-cells-missing for /testcase-data/phandle-tests/provider1
[    0.699828] /testcase-data/phandle-tests/consumer-a: could not get 
#phandle-cells-missing for /testcase-data/phandle-tests/provider1
[    0.700273] /testcase-data/phandle-tests/consumer-a: could not find phandle
[    0.700489] /testcase-data/phandle-tests/consumer-a: could not find phandle
[    0.700703] /testcase-data/phandle-tests/consumer-a: arguments longer than 
property
[    0.701100] /testcase-data/phandle-tests/consumer-a: arguments longer than 
property
[    0.702314] irq: no irq domain found for /testcase-data/interrupts/intc0 !
[    0.704022] overlay_is_topmost: #5 clashes #6 
@/testcase-data/overlay-node/test-bus/test-unittest8
[    0.704435] overlay_removal_is_ok: overlay #5 is not topmost
[    0.704647] of_overlay_destroy: removal check failed for overlay #5
[    0.706459] ### dt-test ### end of unittest - 148 passed, 0 failed
[    0.706691] PM: Hibernation image not present or could not be loaded.
[    0.986033] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.316661] ata1.00: ATA-9: ST1000LM014-1EJ164, SM11, max UDMA/133
[    1.316877] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), 
AA
[    1.361049] ata1.00: configured for UDMA/133
[    1.361424] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM014-1EJ1 SM11 
PQ: 0 ANSI: 5
[    1.362147] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 
TB/931 GiB)
[    1.362535] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.362809] sd 0:0:0:0: [sda] Write Protect is off
[    1.363047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.363077] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.363359] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    1.364354]  sda: sda1 sda2 sda3 sda4
[    1.365091] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.634966] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 
0x18ebb92aef2, max_idle_ns: 440795243508 ns
[    1.635366] clocksource: Switched to clocksource tsc
[    1.667984] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.668409] ata2.00: ATA-8: Corsair CSSD-V128GB2, 2.2, max UDMA/133
[    1.668623] ata2.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.669699] ata2.00: configured for UDMA/133
[    1.670081] scsi 1:0:0:0: Direct-Access     ATA      Corsair CSSD-V12 2.2  
PQ: 0 ANSI: 5
[    1.670751] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 
GiB)
[    1.671246] sd 1:0:0:0: [sdb] Write Protect is off
[    1.671458] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.671486] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.671756] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    1.674018]  sdb: sdb1 sdb2 sdb3 sdb4
[    1.674727] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[    1.976958] ata5: SATA link down (SStatus 0 SControl 300)
[    2.281932] ata6: SATA link down (SStatus 0 SControl 300)
[    2.285205] Freeing unused kernel memory: 5816K (ffffffff81adc000 - 
ffffffff8208a000)
[    2.285590] Write protecting the kernel read-only data: 10240k
[    2.286298] Freeing unused kernel memory: 768K (ffff880001540000 - 
ffff880001600000)
[    2.294834] Freeing unused kernel memory: 1504K (ffff880001888000 - 
ffff880001a00000)
[    2.322480] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.361095] zram0: detected capacity change from 0 to 134217728
[    2.370328] zram1: detected capacity change from 0 to 10737418240
[    2.371575] zram2: detected capacity change from 0 to 1073741824
[    2.378118] random: mkfs.ext4 urandom read with 42 bits of entropy available
[    2.379580] EXT4-fs (zram0): couldn't mount as ext3 due to feature 
incompatibilities
[    2.380136] EXT4-fs (zram0): couldn't mount as ext2 due to feature 
incompatibilities
[    2.380800] EXT4-fs (zram0): mounted filesystem without journal. Opts: (null)
[    2.643151] BTRFS: device fsid 815266d6-a8b9-4f63-a593-02fde178263f devid 1 
transid 1347601 /dev/sdb3
[    2.643995] BTRFS info (device sdb3): disk space caching is enabled
[    2.647332] BTRFS: bdev /dev/sdb3 errs: wr 9, rd 0, flush 0, corrupt 0, gen 0
[    2.673418] BTRFS: detected SSD devices, enabling SSD mode
[    3.436455] systemd-udevd[380]: starting version 225
[    3.466578] systemd-udevd[381]: Network interface NamePolicy= disabled on 
kernel command line, ignoring.
[    3.579504] systemd-udevd[381]: Network interface NamePolicy= disabled on 
kernel command line, ignoring.
[    3.786055] usbcore: registered new interface driver usbfs
[    3.786080] usbcore: registered new interface driver hub
[    3.795527] usbcore: registered new device driver usb
[    3.816115] pps_core: LinuxPPS API ver. 1 registered
[    3.816119] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo 
Giometti <giome...@linux.it>
[    3.823179] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.841112] PTP clock support registered
[    3.841591] ehci-pci: EHCI PCI platform driver
[    3.841690] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    3.841701] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus 
number 1
[    3.841728] ehci-pci 0000:00:1a.0: debug port 2
[    3.843369] Linux agpgart interface v0.103
[    3.854482] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    3.882090] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    3.882095] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    3.891174] sdhci: Secure Digital Host Controller Interface driver
[    3.891178] sdhci: Copyright(c) Pierre Ossman
[    3.895981] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 
1)
[    3.896124] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't 
fully claim to support it.
[    3.896135] sdhci-pci 0000:0d:00.0: No vmmc regulator found
[    3.896138] sdhci-pci 0000:0d:00.0: No vqmmc regulator found
[    3.906738] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[    3.906896] sdhci-pci 0000:17:00.0: SDHCI controller found [1180:e822] (rev 
1)
[    3.906996] sdhci-pci 0000:17:00.0: Will use DMA mode even though HW doesn't 
fully claim to support it.
[    3.907007] sdhci-pci 0000:17:00.0: No vmmc regulator found
[    3.907011] sdhci-pci 0000:17:00.0: No vqmmc regulator found
[    3.916875] mmc1: SDHCI controller on PCI [0000:17:00.0] using DMA
[    3.918491] ehci-pci 0000:00:1a.0: irq 11, io mem 0xf2628000
[    3.924144] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    3.924308] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.924314] usb usb1: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    3.924319] usb usb1: Product: EHCI Host Controller
[    3.924323] usb usb1: Manufacturer: Linux 4.3.0-rc4-next-20151009-linux+ 
ehci_hcd
[    3.924326] usb usb1: SerialNumber: 0000:00:1a.0
[    3.924998] hub 1-0:1.0: USB hub found
[    3.925012] hub 1-0:1.0: 3 ports detected
[    3.925411] xhci_hcd 0000:0f:00.0: xHCI Host Controller
[    3.925423] xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus 
number 2
[    3.925667] xhci_hcd 0000:0f:00.0: hcc params 0x014042cb hci version 0x96 
quirks 0x00000004
[    3.925925] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.925930] usb usb2: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    3.925934] usb usb2: Product: xHCI Host Controller
[    3.925938] usb usb2: Manufacturer: Linux 4.3.0-rc4-next-20151009-linux+ 
xhci-hcd
[    3.925941] usb usb2: SerialNumber: 0000:0f:00.0
[    3.926142] hub 2-0:1.0: USB hub found
[    3.926158] hub 2-0:1.0: 2 ports detected
[    3.926344] xhci_hcd 0000:0f:00.0: xHCI Host Controller
[    3.926721] xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus 
number 3
[    3.929664] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    3.929696] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[    3.936903] usb usb3: We don't know the algorithms for LPM for this host, 
disabling LPM.
[    3.936946] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    3.936952] usb usb3: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    3.936956] usb usb3: Product: xHCI Host Controller
[    3.936960] usb usb3: Manufacturer: Linux 4.3.0-rc4-next-20151009-linux+ 
xhci-hcd
[    3.936964] usb usb3: SerialNumber: 0000:0f:00.0
[    3.938346] hub 3-0:1.0: USB hub found
[    3.938407] hub 3-0:1.0: 2 ports detected
[    3.947067] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to 
dynamic conservative mode
[    3.961313] snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing.
[    3.961855] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: 
line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[    3.961861] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 
(0x0/0x0/0x0/0x0/0x0)
[    3.961866] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=2 
(0x1c/0x19/0x0/0x0/0x0)
[    3.961870] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[    3.961874] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[    3.961878] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
[    3.961882] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1b
[    3.961886] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x1a
[    3.963603] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable 
communication
[    3.963613] BUG: unable to handle kernel NULL pointer dereference at 
0000000000000018
[    3.963712] IP: [<ffffffff8135be41>] acpi_ns_walk_namespace+0x3d/0x18f
[    3.963787] PGD 42cb64067 PUD 42cb65067 PMD 0 
[    3.963901] Oops: 0000 [#1] SMP 
[    3.963985] Modules linked in: snd_hda_codec_conexant(+) mfd_core 
snd_hda_codec_generic firewire_ohci(+) firewire_core rtc_cmos crc_itu_t 
sdhci_pci drm(+) sdhci xhci_pci(+) e1000e(+) cfg80211 xhci_hcd snd_hda_intel 
mei_me ehci_pci(+) mmc_core ptp agpgart mei snd_hda_codec pps_core ehci_hcd 
syscopyarea rfkill sysfillrect snd_hda_core sysimgblt fb_sys_fops snd_pcm fb 
snd_timer fbdev usbcore usb_common snd soundcore
[    3.965088] CPU: 0 PID: 466 Comm: modprobe Tainted: G        W       
4.3.0-rc4-next-20151009-linux+ #271
[    3.965134] Hardware name: LENOVO 4318CTO/4318CTO, BIOS 6NET84WW (1.45 ) 
10/03/2012
[    3.965178] task: ffff88042c838000 ti: ffff88042d340000 task.ti: 
ffff88042d340000
[    3.965220] RIP: 0010:[<ffffffff8135be41>]  [<ffffffff8135be41>] 
acpi_ns_walk_namespace+0x3d/0x18f
[    3.965293] RSP: 0018:ffff88042d343a80  EFLAGS: 00010202
[    3.965332] RAX: ffff88042d343af0 RBX: 0000000000000001 RCX: 0000000000000001
[    3.965373] RDX: 00000000ffffffff RSI: ffffffffffffffff RDI: 0000000000000006
[    3.965415] RBP: ffff88042d343ad0 R08: ffffffff8135c425 R09: 0000000000000000
[    3.965456] R10: ffff8800baf31a00 R11: ffffffff820e2300 R12: 0000000000000001
[    3.965669] R13: ffff880429614000 R14: 0000000000000000 R15: 0000000000000000
[    3.965882] FS:  00007f756368b700(0000) GS:ffff88043fc00000(0000) 
knlGS:0000000000000000
[    3.966266] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.966474] CR2: 0000000000000018 CR3: 000000042cb67000 CR4: 00000000000006f0
[    3.966685] Stack:
[    3.966887]  0000000000000023 0000000000000001 ffff88042d343af0 
00000001ffffffff
[    3.967369]  ffff880000000006 0000000000000000 ffff88042c7bf000 
ffff880429614000
[    3.967852]  0000000000000001 0000000000000001 ffff88042d343b10 
ffffffff8135c340
[    3.968334] Call Trace:
[    3.968540]  [<ffffffff8135c340>] acpi_get_devices+0x5b/0x71
[    3.968750]  [<ffffffffa03aa000>] ? 0xffffffffa03aa000
[    3.968963]  [<ffffffffa03aac7f>] hda_fixup_thinkpad_acpi+0x5a/0x186 
[snd_hda_codec_conexant]
[    3.969372]  [<ffffffffa0142cbd>] apply_fixup+0xb6/0x127 [snd_hda_codec]
[    3.969594]  [<ffffffffa0142d50>] snd_hda_apply_fixup+0x22/0x24 
[snd_hda_codec]
[    3.969982]  [<ffffffffa03aabe8>] patch_conexant_auto+0x365/0x382 
[snd_hda_codec_conexant]
[    3.970371]  [<ffffffffa013d3f6>] hda_codec_driver_probe+0xb8/0x118 
[snd_hda_codec]
[    3.970758]  [<ffffffff813be99d>] driver_probe_device+0xfc/0x26c
[    3.970970]  [<ffffffff813beb6a>] __driver_attach+0x5d/0x7f
[    3.971181]  [<ffffffff813beb0d>] ? driver_probe_device+0x26c/0x26c
[    3.971391]  [<ffffffff813bcf97>] bus_for_each_dev+0x6d/0x85
[    3.971601]  [<ffffffff813be544>] driver_attach+0x1e/0x20
[    3.971811]  [<ffffffff813be13f>] bus_add_driver+0xf1/0x1e9
[    3.972020]  [<ffffffffa03ae000>] ? 0xffffffffa03ae000
[    3.972228]  [<ffffffff813bf3f4>] driver_register+0x8e/0xca
[    3.972437]  [<ffffffffa03ae000>] ? 0xffffffffa03ae000
[    3.972650]  [<ffffffffa013d0c4>] __hda_codec_driver_register+0x5a/0x5c 
[snd_hda_codec]
[    3.973040]  [<ffffffffa03ae01e>] conexant_driver_init+0x1e/0x20 
[snd_hda_codec_conexant]
[    3.973425]  [<ffffffff81002152>] do_one_initcall+0xed/0x17a
[    3.973635]  [<ffffffff81144861>] ? kmem_cache_alloc_trace+0x3d/0x16d
[    3.973848]  [<ffffffff8110175d>] ? do_init_module+0x27/0x1df
[    3.974059]  [<ffffffff81101795>] do_init_module+0x5f/0x1df
[    3.974270]  [<ffffffff810bb0f7>] load_module+0x185a/0x1c00
[    3.974481]  [<ffffffff81159de5>] ? vfs_read+0xf1/0xff
[    3.974691]  [<ffffffff810b86f7>] ? copy_module_from_fd+0x8e/0xef
[    3.974902]  [<ffffffff810bb5f2>] SyS_finit_module+0x5e/0x6b
[    3.975111]  [<ffffffff810bb5f2>] ? SyS_finit_module+0x5e/0x6b
[    3.975324]  [<ffffffff81538836>] entry_SYSCALL_64_fastpath+0x16/0x75
[    3.975535] Code: 41 54 41 89 cc 53 bb 01 00 00 00 48 83 ec 28 48 83 fe ff 
89 7d d0 4c 0f 44 35 e4 6c df 00 89 55 c8 45 31 ff 41 83 e4 01 89 4d cc <4d> 8b 
6e 18 4c 89 45 c0 4c 89 4d b8 c7 45 d4 00 00 00 00 4d 85 
[    3.977772] RIP  [<ffffffff8135be41>] acpi_ns_walk_namespace+0x3d/0x18f
[    3.978010]  RSP <ffff88042d343a80>
[    3.978214] CR2: 0000000000000018
[    3.978456] ---[ end trace dd833814130a8abf ]---
[    3.990613] [drm] Initialized drm 1.1.0 20060810
[    3.995416] Intel(R) Wireless WiFi driver for Linux
[    3.995647] Copyright(c) 2003- 2015 Intel Corporation
[    3.999310] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM 
control
[    4.001640] random: nonblocking pool is initialized
[    4.007844] iwlwifi 0000:03:00.0: Direct firmware load for 
iwlwifi-6050-exp.ucode failed with error -2
[    4.012450] iwlwifi 0000:03:00.0: loaded firmware version 41.28.5.1 build 
33926 op_mode iwldvm
[    4.033843] firewire_ohci 0000:17:00.3: added OHCI v1.10 device as card 0, 4 
IR + 4 IT contexts, quirks 0x11
[    4.058522] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled
[    4.058740] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    4.058977] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[    4.059192] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N + 
WiMAX 6250 AGN, REV=0x84
[    4.059890] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[    4.125937] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    4.159127] microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x5
[    4.163835] microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x5
[    4.164658] microcode: CPU0 updated to revision 0x7, date = 2013-08-20
[    4.169393] microcode: Microcode Update Driver: v2.00 
<tig...@aivazian.fsnet.co.uk>, Peter Oruba
[    4.241769] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    4.246786] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. 
Using workaround
[    4.357142] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    4.357361] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.357951] hub 1-1:1.0: USB hub found
[    4.358390] hub 1-1:1.0: 6 ports detected
[    4.365742] cfg80211: World regulatory domain updated:
[    4.365955] cfg80211:  DFS Master region: unset
[    4.365992] cfg80211:   (start_freq - end_freq @ bandwidth), 
(max_antenna_gain, max_eirp), (dfs_cac_time)
[    4.366575] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 
mBm), (N/A)
[    4.366982] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 
mBm), (N/A)
[    4.367368] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 
mBm), (N/A)
[    4.367769] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz 
AUTO), (N/A, 2000 mBm), (N/A)
[    4.368158] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz 
AUTO), (N/A, 2000 mBm), (0 s)
[    4.368544] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 
mBm), (0 s)
[    4.368954] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 
mBm), (N/A)
[    4.369343] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 
mBm), (N/A)
[    4.397050] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 
f0:de:f1:3e:ba:af
[    4.397439] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    4.398981] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[    4.400770] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    4.400992] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus 
number 4
[    4.401398] ehci-pci 0000:00:1d.0: debug port 2
[    4.405570] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    4.426766] ehci-pci 0000:00:1d.0: irq 7, io mem 0xf2628400
[    4.433258] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    4.433606] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    4.433854] usb usb4: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    4.434239] usb usb4: Product: EHCI Host Controller
[    4.434447] usb usb4: Manufacturer: Linux 4.3.0-rc4-next-20151009-linux+ 
ehci_hcd
[    4.434856] usb usb4: SerialNumber: 0000:00:1d.0
[    4.441478] hub 4-0:1.0: USB hub found
[    4.442757] hub 4-0:1.0: 3 ports detected
[    4.445016] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    4.448702] ------------[ cut here ]------------
[    4.448954] WARNING: CPU: 0 PID: 433 at lib/kobject.c:597 
kobject_get+0x33/0x6a()
[    4.449340] kobject: ' ' (ffff88042cef0e58): is not initialized, yet 
kobject_get() is being called.
[    4.449746] Modules linked in: gpio_ich(+) coretemp kvm_intel kvm irqbypass 
microcode arc4 psmouse evdev video fbcon bitblit i2c_algo_bit softcursor font 
i2c_i801 iwldvm drm_kms_helper mac80211 cfbfillrect cfbimgblt cfbcopyarea ttm 
iwlwifi lpc_ich snd_hda_codec_conexant(+) mfd_core snd_hda_codec_generic 
firewire_ohci firewire_core rtc_cmos crc_itu_t sdhci_pci drm sdhci xhci_pci 
e1000e cfg80211 xhci_hcd snd_hda_intel mei_me ehci_pci mmc_core ptp agpgart mei 
snd_hda_codec pps_core ehci_hcd syscopyarea rfkill sysfillrect snd_hda_core 
sysimgblt fb_sys_fops snd_pcm fb snd_timer fbdev usbcore usb_common snd 
soundcore
[    4.457537] CPU: 0 PID: 433 Comm: systemd-udevd Tainted: G      D W       
4.3.0-rc4-next-20151009-linux+ #271
[    4.457941] Hardware name: LENOVO 4318CTO/4318CTO, BIOS 6NET84WW (1.45 ) 
10/03/2012
[    4.458325]  0000000000000000 ffff88042c19fa40 ffffffff812ed22c 
ffff88042c19fa88
[    4.458828]  ffff88042c19fa78 ffffffff81056d88 ffffffff812eedb9 
ffff88042cef0e58
[    4.459313]  ffff8804297bc000 0000000000000000 0000000000000003 
ffff88042c19fae0
[    4.459811] Call Trace:
[    4.460018]  [<ffffffff812ed22c>] dump_stack+0x44/0x55
[    4.460229]  [<ffffffff81056d88>] warn_slowpath_common+0x9f/0xb8
[    4.460440]  [<ffffffff812eedb9>] ? kobject_get+0x33/0x6a
[    4.460652]  [<ffffffff81056de9>] warn_slowpath_fmt+0x48/0x50
[    4.460884]  [<ffffffff812eedb9>] kobject_get+0x33/0x6a
[    4.461097]  [<ffffffff8144f051>] of_node_get+0x1b/0x21
[    4.461310]  [<ffffffff813147de>] of_gpiochip_add+0x6b/0xdd
[    4.461520]  [<ffffffff81312e37>] gpiochip_add+0x22b/0x3f5
[    4.461749]  [<ffffffff81076a6c>] ? wake_up_q+0x56/0x56
[    4.461964]  [<ffffffffa00206ab>] ichx_gpio_probe+0x2cb/0x351 [gpio_ich]
[    4.462177]  [<ffffffff813c03c4>] platform_drv_probe+0x38/0x7d
[    4.462388]  [<ffffffff813be99d>] driver_probe_device+0xfc/0x26c
[    4.462601]  [<ffffffff813beb6a>] __driver_attach+0x5d/0x7f
[    4.462828]  [<ffffffff813beb0d>] ? driver_probe_device+0x26c/0x26c
[    4.463041]  [<ffffffff813bcf97>] bus_for_each_dev+0x6d/0x85
[    4.463251]  [<ffffffff813be544>] driver_attach+0x1e/0x20
[    4.463460]  [<ffffffff813be13f>] bus_add_driver+0xf1/0x1e9
[    4.463669]  [<ffffffffa0023000>] ? 0xffffffffa0023000
[    4.463896]  [<ffffffff813bf3f4>] driver_register+0x8e/0xca
[    4.464108]  [<ffffffffa0023000>] ? 0xffffffffa0023000
[    4.464316]  [<ffffffff813c031a>] __platform_driver_register+0x36/0x38
[    4.464529]  [<ffffffffa0023017>] ichx_gpio_driver_init+0x17/0x19 [gpio_ich]
[    4.464760]  [<ffffffff81002152>] do_one_initcall+0xed/0x17a
[    4.464972]  [<ffffffff81145a6e>] ? kfree+0xec/0x135
[    4.465180]  [<ffffffff81144861>] ? kmem_cache_alloc_trace+0x3d/0x16d
[    4.465391]  [<ffffffff8110175d>] ? do_init_module+0x27/0x1df
[    4.465602]  [<ffffffff81101795>] do_init_module+0x5f/0x1df
[    4.465830]  [<ffffffff810bb0f7>] load_module+0x185a/0x1c00
[    4.466043]  [<ffffffff81159de5>] ? vfs_read+0xf1/0xff
[    4.466253]  [<ffffffff810b86f7>] ? copy_module_from_fd+0x8e/0xef
[    4.466465]  [<ffffffff810bb5f2>] SyS_finit_module+0x5e/0x6b
[    4.466674]  [<ffffffff810bb5f2>] ? SyS_finit_module+0x5e/0x6b
[    4.466904]  [<ffffffff81538836>] entry_SYSCALL_64_fastpath+0x16/0x75
[    4.467118] ---[ end trace dd833814130a8ac0 ]---
[    4.467324] ------------[ cut here ]------------
[    4.467532] WARNING: CPU: 0 PID: 433 at include/linux/kref.h:47 
kobject_get+0x5d/0x6a()
[    4.467932] Modules linked in: gpio_ich(+) coretemp kvm_intel kvm irqbypass 
microcode arc4 psmouse evdev video fbcon bitblit i2c_algo_bit softcursor font 
i2c_i801 iwldvm drm_kms_helper mac80211 cfbfillrect cfbimgblt cfbcopyarea ttm 
iwlwifi lpc_ich snd_hda_codec_conexant(+) mfd_core snd_hda_codec_generic 
firewire_ohci firewire_core rtc_cmos crc_itu_t sdhci_pci drm sdhci xhci_pci 
e1000e cfg80211 xhci_hcd snd_hda_intel mei_me ehci_pci mmc_core ptp agpgart mei 
snd_hda_codec pps_core ehci_hcd syscopyarea rfkill sysfillrect snd_hda_core 
sysimgblt fb_sys_fops snd_pcm fb snd_timer fbdev usbcore usb_common snd 
soundcore
[    4.471127] CPU: 0 PID: 433 Comm: systemd-udevd Tainted: G      D W       
4.3.0-rc4-next-20151009-linux+ #271
[    4.471513] Hardware name: LENOVO 4318CTO/4318CTO, BIOS 6NET84WW (1.45 ) 
10/03/2012
[    4.471913]  0000000000000000 ffff88042c19fa98 ffffffff812ed22c 
0000000000000000
[    4.472398]  ffff88042c19fad0 ffffffff81056d88 ffffffff812eede3 
ffff88042cef0e58
[    4.472898]  ffff8804297bc000 0000000000000000 0000000000000003 
ffff88042c19fae0
[    4.473381] Call Trace:
[    4.473585]  [<ffffffff812ed22c>] dump_stack+0x44/0x55
[    4.473813]  [<ffffffff81056d88>] warn_slowpath_common+0x9f/0xb8
[    4.474024]  [<ffffffff812eede3>] ? kobject_get+0x5d/0x6a
[    4.474234]  [<ffffffff81056e54>] warn_slowpath_null+0x1a/0x1c
[    4.474444]  [<ffffffff812eede3>] kobject_get+0x5d/0x6a
[    4.474653]  [<ffffffff8144f051>] of_node_get+0x1b/0x21
[    4.474880]  [<ffffffff813147de>] of_gpiochip_add+0x6b/0xdd
[    4.475092]  [<ffffffff81312e37>] gpiochip_add+0x22b/0x3f5
[    4.475303]  [<ffffffff81076a6c>] ? wake_up_q+0x56/0x56
[    4.475514]  [<ffffffffa00206ab>] ichx_gpio_probe+0x2cb/0x351 [gpio_ich]
[    4.475743]  [<ffffffff813c03c4>] platform_drv_probe+0x38/0x7d
[    4.475956]  [<ffffffff813be99d>] driver_probe_device+0xfc/0x26c
[    4.476167]  [<ffffffff813beb6a>] __driver_attach+0x5d/0x7f
[    4.476376]  [<ffffffff813beb0d>] ? driver_probe_device+0x26c/0x26c
[    4.476587]  [<ffffffff813bcf97>] bus_for_each_dev+0x6d/0x85
[    4.476814]  [<ffffffff813be544>] driver_attach+0x1e/0x20
[    4.477025]  [<ffffffff813be13f>] bus_add_driver+0xf1/0x1e9
[    4.477235]  [<ffffffffa0023000>] ? 0xffffffffa0023000
[    4.477444]  [<ffffffff813bf3f4>] driver_register+0x8e/0xca
[    4.477653]  [<ffffffffa0023000>] ? 0xffffffffa0023000
[    4.477879]  [<ffffffff813c031a>] __platform_driver_register+0x36/0x38
[    4.478094]  [<ffffffffa0023017>] ichx_gpio_driver_init+0x17/0x19 [gpio_ich]
[    4.478306]  [<ffffffff81002152>] do_one_initcall+0xed/0x17a
[    4.478516]  [<ffffffff81145a6e>] ? kfree+0xec/0x135
[    4.478741]  [<ffffffff81144861>] ? kmem_cache_alloc_trace+0x3d/0x16d
[    4.478954]  [<ffffffff8110175d>] ? do_init_module+0x27/0x1df
[    4.479164]  [<ffffffff81101795>] do_init_module+0x5f/0x1df
[    4.479374]  [<ffffffff810bb0f7>] load_module+0x185a/0x1c00
[    4.479584]  [<ffffffff81159de5>] ? vfs_read+0xf1/0xff
[    4.479811]  [<ffffffff810b86f7>] ? copy_module_from_fd+0x8e/0xef
[    4.480024]  [<ffffffff810bb5f2>] SyS_finit_module+0x5e/0x6b
[    4.480234]  [<ffffffff810bb5f2>] ? SyS_finit_module+0x5e/0x6b
[    4.480445]  [<ffffffff81538836>] entry_SYSCALL_64_fastpath+0x16/0x75
[    4.480656] ---[ end trace dd833814130a8ac1 ]---
[    4.480885] general protection fault: 0000 [#2] SMP 
[    4.481144] Modules linked in: gpio_ich(+) coretemp kvm_intel kvm irqbypass 
microcode arc4 psmouse evdev video fbcon bitblit i2c_algo_bit softcursor font 
i2c_i801 iwldvm drm_kms_helper mac80211 cfbfillrect cfbimgblt cfbcopyarea ttm 
iwlwifi lpc_ich snd_hda_codec_conexant(+) mfd_core snd_hda_codec_generic 
firewire_ohci firewire_core rtc_cmos crc_itu_t sdhci_pci drm sdhci xhci_pci 
e1000e cfg80211 xhci_hcd snd_hda_intel mei_me ehci_pci mmc_core ptp agpgart mei 
snd_hda_codec pps_core ehci_hcd syscopyarea rfkill sysfillrect snd_hda_core 
sysimgblt fb_sys_fops snd_pcm fb snd_timer fbdev usbcore usb_common snd 
soundcore
[    4.484279] CPU: 0 PID: 433 Comm: systemd-udevd Tainted: G      D W       
4.3.0-rc4-next-20151009-linux+ #271
[    4.484665] Hardware name: LENOVO 4318CTO/4318CTO, BIOS 6NET84WW (1.45 ) 
10/03/2012
[    4.485050] task: ffff88042c1cb500 ti: ffff88042c19c000 task.ti: 
ffff88042c19c000
[    4.485432] RIP: 0010:[<ffffffff8144c257>]  [<ffffffff8144c257>] 
__of_find_property+0x24/0x51
[    4.485846] RSP: 0018:ffff88042c19fac8  EFLAGS: 00010006
[    4.486058] RAX: 0000000000000000 RBX: 3a30303a30303030 RCX: 00000000ffffffff
[    4.486270] RDX: 0000000000000000 RSI: ffffffff818072f8 RDI: ffff88042cfcd290
[    4.486482] RBP: ffff88042c19fae0 R08: 0000000000000000 R09: 0000000000000000
[    4.486694] R10: ffffffffa0020de0 R11: 000000000001ffe0 R12: 0000000000000000
[    4.486905] R13: ffffffff818072f8 R14: 0000000000000003 R15: ffffffffa0020f50
[    4.487118] FS:  00007f75d64247c0(0000) GS:ffff88043fc00000(0000) 
knlGS:0000000000000000
[    4.487502] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    4.487710] CR2: 00007f75d642e000 CR3: 000000042c1d9000 CR4: 00000000000006f0
[    4.487921] Stack:
[    4.488123]  ffff88042cfcd290 0000000000000286 0000000000000000 
ffff88042c19fb10
[    4.488608]  ffffffff8144c2be ffffffff818072f8 0000000000000000 
ffffffffa0020f50
[    4.489090]  ffff88042cfcd290 ffff88042c19fb40 ffffffff81314805 
0000000000000003
[    4.489573] Call Trace:
[    4.489777]  [<ffffffff8144c2be>] of_find_property+0x3a/0x58
[    4.489988]  [<ffffffff81314805>] of_gpiochip_add+0x92/0xdd
[    4.490198]  [<ffffffff81312e37>] gpiochip_add+0x22b/0x3f5
[    4.490409]  [<ffffffff81076a6c>] ? wake_up_q+0x56/0x56
[    4.490621]  [<ffffffffa00206ab>] ichx_gpio_probe+0x2cb/0x351 [gpio_ich]
[    4.490834]  [<ffffffff813c03c4>] platform_drv_probe+0x38/0x7d
[    4.491044]  [<ffffffff813be99d>] driver_probe_device+0xfc/0x26c
[    4.491254]  [<ffffffff813beb6a>] __driver_attach+0x5d/0x7f
[    4.491464]  [<ffffffff813beb0d>] ? driver_probe_device+0x26c/0x26c
[    4.491674]  [<ffffffff813bcf97>] bus_for_each_dev+0x6d/0x85
[    4.491884]  [<ffffffff813be544>] driver_attach+0x1e/0x20
[    4.492094]  [<ffffffff813be13f>] bus_add_driver+0xf1/0x1e9
[    4.492303]  [<ffffffffa0023000>] ? 0xffffffffa0023000
[    4.492513]  [<ffffffff813bf3f4>] driver_register+0x8e/0xca
[    4.492721]  [<ffffffffa0023000>] ? 0xffffffffa0023000
[    4.492930]  [<ffffffff813c031a>] __platform_driver_register+0x36/0x38
[    4.493143]  [<ffffffffa0023017>] ichx_gpio_driver_init+0x17/0x19 [gpio_ich]
[    4.493355]  [<ffffffff81002152>] do_one_initcall+0xed/0x17a
[    4.493565]  [<ffffffff81145a6e>] ? kfree+0xec/0x135
[    4.493772]  [<ffffffff81144861>] ? kmem_cache_alloc_trace+0x3d/0x16d
[    4.493983]  [<ffffffff8110175d>] ? do_init_module+0x27/0x1df
[    4.494194]  [<ffffffff81101795>] do_init_module+0x5f/0x1df
[    4.494404]  [<ffffffff810bb0f7>] load_module+0x185a/0x1c00
[    4.494614]  [<ffffffff81159de5>] ? vfs_read+0xf1/0xff
[    4.494823]  [<ffffffff810b86f7>] ? copy_module_from_fd+0x8e/0xef
[    4.495035]  [<ffffffff810bb5f2>] SyS_finit_module+0x5e/0x6b
[    4.495244]  [<ffffffff810bb5f2>] ? SyS_finit_module+0x5e/0x6b
[    4.495457]  [<ffffffff81538836>] entry_SYSCALL_64_fastpath+0x16/0x75
[    4.495668] Code: 5c 41 5d 41 5e 5d c3 66 66 66 66 90 31 c0 48 85 ff 74 44 
55 48 89 e5 41 55 49 89 f5 41 54 49 89 d4 53 48 8b 5f 30 48 85 db 74 23 <48> 8b 
3b 4c 89 ee e8 c6 62 ea ff 85 c0 75 0e 4d 85 e4 74 0f 8b 
[    4.497905] RIP  [<ffffffff8144c257>] __of_find_property+0x24/0x51
[    4.498143]  RSP <ffff88042c19fac8>
[    4.498349] ---[ end trace dd833814130a8ac2 ]---
[    4.504085] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    4.527577] systemd-udevd[424]: Process 'net.sh wlan0 start' failed with 
exit code 1.
[    4.533475] systemd-udevd[432]: Process 'net.sh eth0 start' failed with exit 
code 1.
[    4.554099] systemd-udevd[381]: worker [433] terminated by signal 11 
(Segmentation fault)
[    4.554492] systemd-udevd[381]: worker [433] failed while handling 
'/devices/pci0000:00/0000:00:1f.0/gpio_ich.1.auto'
[    4.560860] firewire_core 0000:17:00.3: created device fw0: GUID 
f0def1ff3ebaafff, S400
[    4.676723] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[    4.765292] usb 1-1.1: New USB device found, idVendor=0765, idProduct=5001
[    4.765509] usb 1-1.1: New USB device strings: Mfr=0, Product=0, 
SerialNumber=0
[    4.769716] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    4.797719] hidraw: raw HID events driver (C) Jiri Kosina
[    4.804288] usbcore: registered new interface driver usbhid
[    4.804502] usbhid: USB HID core driver
[    4.810456] hid-generic 0003:0765:5001.0001: hiddev0,hidraw0: USB HID v1.00 
Device [HID 0765:5001] on usb-0000:00:1a.0-1.1/input0
[    4.841710] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[    4.899804] usb 4-1: New USB device found, idVendor=8087, idProduct=0020
[    4.900042] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.901069] hub 4-1:1.0: USB hub found
[    4.901478] hub 4-1:1.0: 8 ports detected
[    4.928180] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
[    4.928400] usb 1-1.3: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[    4.928818] usb 1-1.3: Product: Biometric Coprocessor
[    4.929028] usb 1-1.3: Manufacturer: UPEK
[    5.002714] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[    5.008942] psmouse serio1: synaptics: queried max coordinates: x [..5888], 
y [..4820]
[    5.091849] tun: Universal TUN/TAP device driver, 1.6
[    5.092061] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[    5.094196] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480f
[    5.094415] usb 1-1.6: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[    5.094827] usb 1-1.6: Product: Integrated Camera
[    5.095038] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    5.099475] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 
0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367
[    5.099906] psmouse serio1: synaptics: serio: Synaptics pass-through port at 
isa0060/serio1/input0
[    5.156709] input: SynPS/2 Synaptics TouchPad as 
/devices/platform/i8042/serio1/input/input3
[    5.177692] usb 4-1.3: new high-speed USB device number 3 using ehci-pci
[    5.195707] Linux video capture interface: v2.00
[    5.223319] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f)
[    5.228066] input: Integrated Camera as 
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input5
[    5.229125] usbcore: registered new interface driver uvcvideo
[    5.229338] USB Video Class driver (1.1.1)
[    5.259241] bridge: automatic filtering via arp/ip/ip6tables has been 
deprecated. Update your scripts to load br_netfilter if you need this.
[    5.262534] Bridge firewalling registered
[    5.263718] usb 4-1.3: New USB device found, idVendor=8086, idProduct=0187
[    5.263936] usb 4-1.3: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[    5.264320] usb 4-1.3: Product: Intel(R) Centrino(R) Advanced-N + WiMAX 6250
[    5.264532] usb 4-1.3: Manufacturer: Intel(R) Corporation
[    5.340683] usb 4-1.4: new high-speed USB device number 4 using ehci-pci
[    5.428840] usb 4-1.4: config 1 has an invalid interface number: 1 but max 
is 0
[    5.429229] usb 4-1.4: config 1 has no interface number 0
[    5.431611] usb 4-1.4: New USB device found, idVendor=05c6, idProduct=9204
[    5.431849] usb 4-1.4: New USB device strings: Mfr=3, Product=2, 
SerialNumber=0
[    5.432235] usb 4-1.4: Product: Qualcomm Gobi 2000
[    5.432443] usb 4-1.4: Manufacturer: Qualcomm Incorporated
[    5.497947] usbcore: registered new interface driver usbserial
[    5.498724] usb 4-1.8: new full-speed USB device number 5 using ehci-pci
[    5.500941] usbcore: registered new interface driver usbserial_generic
[    5.501843] usbserial: USB Serial support registered for generic
[    5.509010] usbcore: registered new interface driver qcserial
[    5.510044] usbserial: USB Serial support registered for Qualcomm USB modem
[    5.511031] qcserial 4-1.4:1.1: Qualcomm USB modem converter detected
[    5.511523] usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB0
[    5.586103] usb 4-1.8: New USB device found, idVendor=056a, idProduct=00e2
[    5.586387] usb 4-1.8: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[    5.586864] usb 4-1.8: Product: ISD-V4
[    5.587073] usb 4-1.8: Manufacturer: Tablet
[    5.645372] BTRFS info (device sdb3): turning on discard
[    5.645677] BTRFS info (device sdb3): disk space caching is enabled
[    5.785120] input: Wacom ISDv4 E2 Finger as 
/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8:1.0/0003:056A:00E2.0002/input/input7
[    5.787199] wacom 0003:056A:00E2.0002: hidraw1: USB HID v1.11 Mouse [Tablet 
ISD-V4] on usb-0000:00:1d.0-1.8/input0
[    6.177108] EXT4-fs (sda3): mounted filesystem with writeback data mode. 
Opts: data=writeback,user_xattr
[    6.300631] EXT4-fs (sda4): mounted filesystem with writeback data mode. 
Opts: (null)
[    6.316854] EXT4-fs (zram0): mounted filesystem without journal. Opts: 
barrier=0,commit=240
[    6.319597] EXT4-fs (zram1): mounted filesystem without journal. Opts: 
barrier=0,commit=240
[    6.989531] snd_hda_intel 0000:01:00.1: azx_get_response timeout, switching 
to polling mode: last cmd=0x300f0000
[    7.282952] input: HDA NVidia HDMI/DP,pcm=3 as 
/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input9
[    7.283464] input: HDA NVidia HDMI/DP,pcm=7 as 
/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input10
[    7.284014] input: HDA NVidia HDMI/DP,pcm=8 as 
/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input11
[    7.284536] input: HDA NVidia HDMI/DP,pcm=9 as 
/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input12
[    8.781321] usb 4-1.4: USB disconnect, device number 4
[    8.781710] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected 
from ttyUSB0
[    8.782115] qcserial 4-1.4:1.1: device disconnected
[    9.726303] usb 4-1.4: new high-speed USB device number 6 using ehci-pci
[    9.813892] usb 4-1.4: New USB device found, idVendor=05c6, idProduct=9205
[    9.814109] usb 4-1.4: New USB device strings: Mfr=3, Product=2, 
SerialNumber=0
[    9.814507] usb 4-1.4: Product: Qualcomm Gobi 2000
[    9.814717] usb 4-1.4: Manufacturer: Qualcomm Incorporated
[    9.817947] qcserial 4-1.4:1.1: Qualcomm USB modem converter detected
[    9.818259] usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB0
[    9.819231] qcserial 4-1.4:1.2: Qualcomm USB modem converter detected
[    9.819568] usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB1
[    9.820345] qcserial 4-1.4:1.3: Qualcomm USB modem converter detected
[    9.820652] usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB2
[   10.553641] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, 
buttons: 3/3
[   10.841876] input: TPPS/2 IBM TrackPoint as 
/devices/platform/i8042/serio1/serio2/input/input4
[   14.433577] systemd-udevd[426]: Process '/usr/local/sbin/doBackup.sh' failed 
with exit code 127.
[   16.878894] Adding 16347080k swap on /media/swapfile.  Priority:-1 
extents:212 across:196689920k FS
[   18.048248] Bluetooth: Core ver 2.20
[   18.048479] NET: Registered protocol family 31
[   18.048714] Bluetooth: HCI device and connection manager initialized
[   18.051672] Bluetooth: HCI socket layer initialized
[   18.051887] Bluetooth: L2CAP socket layer initialized
[   18.052102] Bluetooth: SCO socket layer initialized
[   18.060746] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.060959] Bluetooth: BNEP filters: protocol multicast
[   18.061170] Bluetooth: BNEP socket layer initialized
[   18.403762] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.584680] device eth0 entered promiscuous mode
[   19.597774] device dummy0 entered promiscuous mode
[   19.606123] device xenbr0 entered promiscuous mode
[   19.609172] xenbr0: port 2(dummy0) entered forwarding state
[   19.609398] xenbr0: port 2(dummy0) entered forwarding state
[   19.643803] systemd-udevd[424]: Process 'net.sh xenbr0 start' failed with 
exit code 1.
[   21.985454] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   21.986081] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   21.987308] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   22.222432] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   22.223086] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   22.223701] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   22.322039] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   24.968474] wlan0: authenticate with 04:a1:51:b8:7b:e5
[   24.972227] wlan0: send auth to 04:a1:51:b8:7b:e5 (try 1/3)
[   25.038717] wlan0: authenticated
[   25.040044] wlan0: associate with 04:a1:51:b8:7b:e5 (try 1/3)
[   25.042252] wlan0: RX AssocResp from 04:a1:51:b8:7b:e5 (capab=0x11 status=0 
aid=1)
[   25.046885] wlan0: associated
[   25.047137] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   25.051153] cfg80211: Regulatory domain changed to country: US
[   25.051368] cfg80211:  DFS Master region: FCC
[   25.051403] cfg80211:   (start_freq - end_freq @ bandwidth), 
(max_antenna_gain, max_eirp), (dfs_cac_time)
[   25.051986] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 
mBm), (N/A)
[   25.052407] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz 
AUTO), (N/A, 1700 mBm), (N/A)
[   25.052797] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz 
AUTO), (N/A, 2300 mBm), (0 s)
[   25.053199] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 
mBm), (0 s)
[   25.053586] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 
mBm), (N/A)
[   25.053970] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 
4000 mBm), (N/A)
[   34.633233] xenbr0: port 2(dummy0) entered forwarding state
[   63.480035] ata2.00: configured for UDMA/133
[   63.480249] ata2: EH complete
[   65.181739] systemd-udevd[381]: seq 1169 
'/devices/pci0000:00/0000:00:1f.0/iTCO_wdt.0.auto' is taking a long time

Reply via email to