On some boards the energy enable detect mode leads in
trouble with some switches, so make the enabling of
this mode configurable through DT.
Signed-off-by: Heiko Schocher <h...@denx.de>
---
.../devicetree/bindings/net/smsc-lan87xx.txt | 19 +++++++++++++++++
drivers/net/phy/smsc.c | 24 +++++++++++++++++-----
2 files changed, 38 insertions(+), 5 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/smsc-lan87xx.txt
diff --git a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
new file mode 100644
index 0000000..39aa1dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
@@ -0,0 +1,19 @@
+SMSC LAN87xx Ethernet PHY
+
+Some boards require special tuning values. Configure them
+through an Ethernet OF device node.
+
+Optional properties:
+
+- disable-energy-detect:
+ If set, do not enable energy detect mode for the SMSC phy.
+ default: enable energy detect mode
+
+Examples:
+
+ /* Attach to an Ethernet device with autodetected PHY */
+ &cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "mii";
+ disable-energy-detect;
+ };
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index 70b0895..f90fbf3 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -43,16 +43,30 @@ static int smsc_phy_ack_interrupt(struct phy_device *phydev)
static int smsc_phy_config_init(struct phy_device *phydev)
{
+#ifdef CONFIG_OF
+ int len;
+ struct device *dev = &phydev->dev;
+ struct device_node *of_node = dev->of_node;
+#endif
int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
+ int enable_energy = 1;
if (rc < 0)
return rc;
- /* Enable energy detect mode for this SMSC Transceivers */
- rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
- rc | MII_LAN83C185_EDPWRDOWN);
- if (rc < 0)
- return rc;
+#ifdef CONFIG_OF
+ if (!of_node && dev->parent->of_node)
+ of_node = dev->parent->of_node;
+ if (of_find_property(of_node, "disable-energy-detect", &len))
+ enable_energy = 0;
+#endif
+ if (enable_energy) {
+ /* Enable energy detect mode for this SMSC Transceivers */
+ rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
+ rc | MII_LAN83C185_EDPWRDOWN);
+ if (rc < 0)
+ return rc;
+ }
return smsc_phy_ack_interrupt(phydev);
}
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
