This patchset adds support for the STM32 DMA controller. This controller provides 8 channels dedicated to managing memory access request from one or more peripherals. Each stream can have up to 8 requests in total.
Changes since v1: - remove dmamux boolean as it is not needed - replace dma by DMA in Kconfig - add default return value in stm32_dma_get_width() - add defalut return value in stm32_dma_get_burst() - use lower case for constant hexadecimal values M'boumba Cedric Madianga (4): dt-bindings: Document the STM32 DMA bindings dmaengine: Add STM32 DMA driver ARM: dts: Add STM32 DMA support for STM32F429 MCU ARM: configs: Add STM32 DMA support in STM32 defconfig .../devicetree/bindings/dma/stm32-dma.txt | 98 ++ arch/arm/boot/dts/stm32f429.dtsi | 31 + arch/arm/configs/stm32_defconfig | 2 + drivers/dma/Kconfig | 12 + drivers/dma/Makefile | 1 + drivers/dma/stm32-dma.c | 1175 ++++++++++++++++++++ 6 files changed, 1319 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/stm32-dma.txt create mode 100644 drivers/dma/stm32-dma.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
