On Wed, Oct 14, 2015 at 12:34 AM, Meelis Roos <mr...@linux.ee> wrote:
>> > 0001:00:07.0 ISA bridge: ULi Electronics Inc. M1533/M1535/M1543 PCI to ISA
>> > Bridge [Aladdin IV/V/V+]
>> > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
>> > ParErr- Stepping- SERR- FastB2B- DisINTx-
>> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
>> > <TAbort- <MAbort- >SERR- <PERR- INTx-
>> > Latency: 0
>> > Region 0: [virtual] I/O ports at 0000 [size=64K]
>> > Region 1: Memory at <unassigned> (32-bit, non-prefetchable)
>> > [size=1M]
>> > Region 2: Memory at <unassigned> (32-bit, non-prefetchable)
>> > [size=1M]
>> > Region 3: [virtual] Memory at fffff80100000000 (32-bit,
>> > non-prefetchable)
>> > Region 4: [virtual] Memory at fffff80100000000 (32-bit,
>> > non-prefetchable)
>> > Region 5: [virtual] Memory at fffff80100000000 (32-bit,
>> > non-prefetchable)
>> > [virtual] Expansion ROM at fffff80100000000 [disabled]
>> > Capabilities: [a0] Power Management version 1
>> > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> > PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>> > 00: b9 10 33 15 0f 00 10 02 00 00 01 06 00 00 00 00
>> > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> > 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
>> > 40: 03 13 4b 80 83 09 00 47 00 00 06 00 00 00 eb 31
>> > 50: 00 00 00 20 90 02 20 03 66 03 00 00 00 00 00 08
>> > 60: 40 00 00 00 00 00 00 00 00 00 00 00 80 20 00 00
>> > 70: 00 00 0a 00 47 00 00 db 04 02 00 04 00 80 01 90
>> > 80: a5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> > a0: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
>> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> Please check attached patch.
>
> Thank you, it seems to work. First, the following lines are gone:
> PCI: Claiming 0001:00:07.0: Resource 0: 000007fe01000000..000007fe0100ffff
> [101]
> PCI: Claiming 0001:00:07.0: Resource 1: 000007ff00000000..000007ff000fffff
> [200]
> PCI: Claiming 0001:00:07.0: Resource 2: 000007ff00000000..000007ff000fffff
> [200]
>
> And then all following PCI: Claiming... lines succeed, with no address
> conflicts.
>
> Now, how can I be sure that removing the ULi ISA bridge allocations does
> not break anything? It seems I did not have I2C enabled in kernel conf -
> I emabled it now, recompiled, got this but it seems to be for another
> PCI device so not related?
> ali15x3_smbus 0001:00:06.0: ALI15X3_smb region uninitialized - upgrade BIOS
> or use force_addr=0xaddr
> ali15x3_smbus 0001:00:06.0: ALI15X3 not detected, module not inserted.
code segment:
/* Determine the address of the SMBus area */
pci_read_config_word(ALI15X3_dev, SMBBA, &ali15x3_smba);
ali15x3_smba &= (0xffff & ~(ALI15X3_SMB_IOSIZE - 1));
if (ali15x3_smba == 0 && force_addr == 0) {
dev_err(&ALI15X3_dev->dev, "ALI15X3_smb region uninitialized "
"- upgrade BIOS or use force_addr=0xaddr\n");
return -ENODEV;
}
SMBBA is 0x14
from lspci:
0001:00:06.0 Non-VGA unclassified device: ULi Electronics Inc. M7101
Power Management Controller [PMU]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: [virtual] I/O ports at <unassigned> [size=16]
[virtual] Expansion ROM at fffff80100000000 [disabled]
00: b9 10 01 71 00 00 00 02 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x14 BAR has 0 really.
>
> Additionally, another driver (i2c-ali1535) claimed 0001:00:06.0 and was
> happy but did not find anything (but I do not know what it sahould find
> so I can see no problem at the moment).
it should complain too:
/* Determine the address of the SMBus area */
pci_read_config_word(dev, SMBBA, &ali1535_offset);
dev_dbg(&dev->dev, "ALI1535_smb is at offset 0x%04x\n", ali1535_offset);
ali1535_offset &= (0xffff & ~(ALI1535_SMB_IOSIZE - 1));
if (ali1535_offset == 0) {
dev_warn(&dev->dev,
"ALI1535_smb region uninitialized - upgrade BIOS?\n");
retval = -ENODEV;
goto exit;
}
>
> I also applied the patch on Sun Blade 100 where i2c was working for me.
> It was still working with this ali quirk patch applied, and no BAR
> errors.
Good.
assume v210 does use those for i2c.
>
> What about other arches - does this patch affect other arches where the
> firmware has configured some addresses for this ULi bridge?
According to data sheet, those BAR on 00:07.0 are all 0, and read only.
Not sure how are those to to use them.
Thanks
Yinghai
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
