On 7/18/24 05:32, Muhammad Usama Anjum wrote:
Removes manual counting of pass and fail tests. This increases readability
of tests, but also improves maintainability of the tests. Print logs in
standard format (without [RUN], [OK] tags)
Signed-off-by: Muhammad Usama Anjum <usama.an...@collabora.com>
---
Changes since v1:
- correct description of the patch
Changes since v2:
- Update description of the patch and add before/after output
Before:
# selftests: x86: check_initial_reg_state_32
# [OK] All GPRs except SP are 0
# [OK] FLAGS is 0x202
ok 5 selftests: x86: check_initial_reg_state_32
After:
# selftests: x86: check_initial_reg_state_32
# TAP version 13
# 1..2
# ok 1 All GPRs except SP are 0
# ok 2 FLAGS is 0x202
# # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
ok 5 selftests: x86: check_initial_reg_state_32
What's the output you see if you were run this as:
make ksefltest TARGETS=x86
How is this different from the output from the above command?
Please provide the same information for your other patches in this
series
thanks,
-- Shuah
