On 1/7/26 5:41 PM, David Ahern wrote:
On 1/7/26 8:38 AM, Fernando Fernandez Mancera wrote:
+icmpv6_to_vrf_based_local_address()
+{
+ local rc
+ local lldummy
+
+ echo
+ echo "ICMPv6 to VRF based local address"
+
+ setup
+
+ lldummy=$(get_linklocal dummy0)
+
+ if [ -z "$lldummy" ]; then
+ echo "Failed to get link local address for dummy0"
+ return 1
+ fi
+
+ run_cmd "$NS_EXEC sysctl -w net.ipv6.conf.all.keep_addr_on_down=1"
+
+ # create VRF and setup
+ run_cmd "$IP link add vrf0 type vrf table 10"
+ run_cmd "$IP link set vrf0 up"
+ run_cmd "$IP link set dummy0 master vrf0"
run_cmd "$IP -6 addr add ::1 dev vrf0 nodad"
makes the VRF device the loopback.
+
+ # route to reach 2001:db8::1/128 on VRF device and back to ::1
+ run_cmd "$IP -6 route add 2001:db8:1::1/64 dev vrf0"
+ run_cmd "$IP -6 route add ::1/128 dev vrf0 table 10"
and then this route add should not be needed. This is how fcnal-test.sh
works.
Oh neat! Thanks.
+
+ # ping6 to link local address
+ run_cmd "$NS_EXEC ${ping6} -c 3 $lldummy%dummy0"
+ log_test $? 0 "Ping to link local address on VRF context"
+
+ # ping6 to link local address from localhost (::1)
+ run_cmd "$NS_EXEC ${ping6} -c 3 -I ::1 $lldummy%dummy0"
-I vrf0 should be needed for all VRF tests. I suspect your current
passing tests are because you have a single setup step and then run
non-VRF test followed by VRF test. Really you need to do the setup,
run_test, cleanup for each test.
You are right here about the cleanup, although the tests are passing
even if the cleanup is properly done or if `-t
icmpv6_to_vrf_based_local_address`. I don't see why they should not pass.
I am changing them to use `-I vrf0` because it makes more sense.
Thanks for the feedback!
Fernando.
+ log_test $? 0 "Ping to link local address from ::1 on VRF context"
+
+ # ping6 to local address
+ run_cmd "$NS_EXEC ${ping6} -c 3 2001:db8:1::1"
+ log_test $? 0 "Ping to local address on VRF context"
+
+ # ping6 to local address from localhost (::1)
+ run_cmd "$NS_EXEC ${ping6} -c 3 -I ::1 2001:db8:1::1"
+ log_test $? 0 "Ping to local address from ::1 on VRF context"
+}
+
