Dne 1.4.2016 v 19:30 Syed Mushtaq napsal(a):
Hi linux-lvm,
In my setup I am trying to map a backend ISCSI storage volume to a volume
group. I am using that volume group as a Disk for VMs in Xen. However, If I
create many volume groups, future volume group creates are slowing down. In my
test I have about 600 VGs. Each VG has a single LV. Here are the commands that
are taking a lot of time
create volume group ( 4.8s ): /usr/sbin/vgcreate VG_XenStorage-1fe15110-61f6-
856f-8ae2-8e42e45a4316 /dev/disk/by-id/scsi-36f47acc1000000007931637600000523
list lvs inside volume group ( 2.4s ): /usr/sbin/lvs --noheadings --units b -o
+lv_tags /dev/VG_XenStorage-1fe15110-61f6-856f-8ae2-8e42e45a4316
check if LVM volume group exisits (2.5s) : /usr/sbin/vgs
VG_XenStorage-1fe15110-61f6-856f-8ae2-8e42e45a4316
I am using LVM 2.0.88. Is this a known issue? Any workarounds?
Thanks for you help.
-Syed
Hi
Lvm2 upstream is now working on release 2.02.150.
Your version 2.02.88 is from Aug 2011.
If you want to get some fixes for your version I'm afraid you will
need to bother your distro maintainer.
You may use '-vvvv' debug to see where it is delayed.
Also 'strace -ttt' is helpful.
Common problems are:
- Users do not set 'correct' lvm.conf filters, so lvm2 with each command has
to unnecessarily scan all devices in your system and some might be pretty slow
to read...
- Very long set of files stored in /etc/lvm/archives (or wherever your distro
has this directory).
- Of course using 5 years old software is out-of-radar of upstream developers...
Regards
Zdenek
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
