thanks for all the good reflections the intention is to see if backups can be done in a much more easy way than have ever been built before
commercial hardware based snapshots limits the amount of snapshots to 256 per filesystem forcing operators to select this only for short living retentions some have even fewer than that another solution could be to store the lv as file into a larger fs, and snapshot these fs that than works as a group; just to decrease the amount of lv needed by the repository host. possible to do this, but will make the retention management more complex. and especially if operators want to change retention for a given snapshot, as retention only can be the same for everything stored on the same lv. that would require a move of the ‘base’ lv file into a separate lv, unless there is a way to rebuild vdo dedup data without a move of the block to represent the file/lv object elsewhere. like clone of a lv... perhaps a snapshot of the origin can be a new master? if that is ok, which I think is ok, than that will work without a move thanks Sent from my iPhone > On 16 Sep 2020, at 00:26, Gionatan Danti <g.da...@assyoma.it> wrote: > > Il 2020-09-15 23:47 Zdenek Kabelac ha scritto: >> You likely don't need such amount of 'snapshots' and you will need to >> implement something to remove snapshot without need, so i.e. after a >> day you will keep maybe 'every-4-hour' and after couple days maybe >> only a day-level snapshot. After a month per-week and so one. > > Agree. "Snapshot-thinning" is an essential part of snapshot management. > >> Speaking of thin volumes - there can be at most 2^24 thin devices >> (this is hard limit you've ask for ;)) - but you have only ~16GiB of >> metadata to store all of them - which gives you ~1KiB of data per such >> volume - >> quite frankly this is not too much - unless as said - your volumes >> are not changed at all - but then why you would be building all this... >> That all said - if you really need that intensive amount of snapshoting, >> lvm2 is likely not for you - and you will need to build something on your >> own, >> as you will need way more efficient and 'targeted' solution for your purpose. > > Thinvols are not activated by default - this means it should be not a big > problem managing some hundreds of them, as the OP ask. Or am I missing > something? > > Regards. > > -- > Danti Gionatan > Supporto Tecnico > Assyoma S.r.l. - www.assyoma.it > email: g.da...@assyoma.it - i...@assyoma.it > GPG public key ID: FF5F32A8 _______________________________________________ linux-lvm mailing list linux-lvm@redhat.com https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
