On Thu, Oct 2, 2014 at 8:56 AM, Finn Thain <[email protected]> wrote:
> Convert mac_scsi to platform device and eliminate scsi_register().
>
> Platform resources for chip registers now follow the documentation. This
> should fix issues with the Mac IIci (and possibly other models too).
>
> Signed-off-by: Finn Thain <[email protected]>
>
> ---
>
> The new hwreg_present() call is not protected by local_irq_save/restore.
> This assumes Geert's patch, "Disable/restore interrupts in
> hwreg_present()/hwreg_write()":
> http://marc.info/?l=linux-kernel&m=141189640826704&w=2
OK, so this cannot go in before v3.18-rc1.
> --- linux.orig/drivers/scsi/mac_scsi.c 2014-10-02 16:56:18.000000000 +1000
> +++ linux/drivers/scsi/mac_scsi.c 2014-10-02 16:56:19.000000000 +1000
> @@ -480,7 +380,117 @@ static struct scsi_host_template driver_
> .use_clustering = DISABLE_CLUSTERING
> };
>
> +static int __init mac_scsi_probe(struct platform_device *pdev)
> +{
> + struct Scsi_Host *instance;
> + int error;
> + int host_flags = 0;
> + struct resource *irq, *pio_mem, *pdma_mem = NULL;
> +
> + if (!MACH_IS_MAC)
> + return -ENODEV;
This check is not needed, asuming you'll only instantiate the platform
device when running on a Mac.
> --- linux.orig/arch/m68k/mac/config.c 2014-10-02 16:55:28.000000000 +1000
> +++ linux/arch/m68k/mac/config.c 2014-10-02 16:56:19.000000000 +1000
> @@ -929,6 +929,36 @@ static struct platform_device swim_pdev
> .resource = &swim_rsrc,
> };
>
> +static struct resource mac_scsi_0_rsrc[] = {
> + {
> + .flags = IORESOURCE_IRQ,
> + .start = IRQ_MAC_SCSI,
> + .end = IRQ_MAC_SCSI,
> + },
> + { .flags = IORESOURCE_MEM },
> + { .flags = IORESOURCE_MEM },
> +};
> +
> +static struct resource mac_scsi_1_rsrc[] = {
> + /* IRQ_NUBUS_E maybe? */
> + { .flags = IORESOURCE_MEM },
> + { .flags = IORESOURCE_MEM },
> +};
> +
> +static struct platform_device mac_scsi_0_pdev = {
> + .name = "mac_scsi",
> + .id = 0,
> + .resource = mac_scsi_0_rsrc,
> + .num_resources = ARRAY_SIZE(mac_scsi_0_rsrc),
> +};
> +
> +static struct platform_device mac_scsi_1_pdev = {
> + .name = "mac_scsi",
> + .id = 1,
> + .resource = mac_scsi_1_rsrc,
> + .num_resources = ARRAY_SIZE(mac_scsi_1_rsrc),
> +};
> +
> static struct platform_device esp_0_pdev = {
> .name = "mac_esp",
> .id = 0,
> @@ -1000,6 +1030,53 @@ int __init mac_platform_init(void)
> (macintosh_config->ident == MAC_MODEL_Q950))
> platform_device_register(&esp_1_pdev);
> break;
> + case MAC_SCSI_IIFX:
> + /* Addresses from The Guide to Mac Family Hardware. */
> + mac_scsi_0_rsrc[1].start = 0x50008000; /* SCSI DMA */
> + mac_scsi_0_rsrc[1].end = mac_scsi_0_rsrc[1].start + 0x1FFF;
> + /* $5000 E000 - $5000 FFFF: Alternate SCSI (Hsk) */
> + /* $5000 C000 - $5000 DFFF: Alternate SCSI (DMA) */
> + /* The SCSI DMA custom IC embeds the 53C80 core. mac_scsi does
> + * not make use of its DMA or hardware handshaking logic.
> + */
> + mac_scsi_0_pdev.num_resources--;
> + platform_device_register(&mac_scsi_0_pdev);
What about removing the static mac_scsi_0_pdev and mac_scsi_1_pdev,
and calling platform_device_register_simple() instead?
That way you
(a) don't have to fiddle with mac_scsi_0_pdev.num_resources, and
(b) the resources can become const and __initconst, as a copy will be
allocated dynamically.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
