Ignore my previous email. The card wasn't tuned to anything. I tuned to
a known good station and get this:
FE: Samsung S5H1411 QAM/8VSB Frontend (ATSC)
status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status SCVYL | signal 0127 | snr 0127 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status SCVYL | signal 0127 | snr 0127 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status SCVYL | signal 0127 | snr 0127 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status SCVYL | signal 0127 | snr 0127 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status SCVYL | signal 0127 | snr 0127 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status SCVYL | signal 0127 | snr 0127 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
On Thu, 22 Jan 2009, Devin Heitmueller wrote:
On Thu, Jan 22, 2009 at 4:37 PM, Joseph Shraibman
<linuxtv....@jks.tupari.net> wrote:
On some demods, the strength and SNR indicators are only valid if you
have a lock.
But why don't I get a lock? I was getting signals with my pcHDTV3000 so I
know it isn't an antenna problem.
I just looked back at your dmesg output, and I am somewhat confused.
Do you have multiple cards installed in the host at the same time?
Isn't the Oren OR51132 the other card? I would assume that you would
need to be looking at the output of the s5h1411 frontend with femon if
you're trying to capture on the Fusion HDTV 7 Dual Express. Or
perhaps I am just missing something here.
Devin
--
Devin J. Heitmueller
http://www.devinheitmueller.com
AIM: devinheitmueller
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
