aderach schrieb:
Does this driver is working for ov534 with 9657 sensor ID ?
I don't know the ov534. The sensor ID is the same.
At the moment the driver support only the YUV formats.
I don't know, which format the ov534 expect.
Where did you find the document to write this code?
I haven't a real documentation. I get the preliminary OV9655 datasheet
with the register
description from OmniVision.
Most of the register values in the driver were extracted from the inf
file of the evaluation
board driver. I compare the values for the different output sizes and
analyze them.
Based on this and some test I write the driver.
Regards
Stefan
-------- Message initial --------
*De*: Guennadi Liakhovetski <[email protected]
<mailto:guennadi%20liakhovetski%20%[email protected]%3e>>
*À*: Stefan Herbrechtsmeier <[email protected]
<mailto:stefan%20herbrechtsmeier%20%[email protected]%3e>>
*Cc*: Linux Media Mailing List <[email protected]
<mailto:linux%20media%20mailing%20list%20%[email protected]%3e>>,
Hans Verkuil <[email protected]
<mailto:hans%20verkuil%20%[email protected]%3e>>
*Sujet*: Re: [PATCH] Add ov9655 camera driver
*Date*: Mon, 6 Apr 2009 17:58:57 +0200 (CEST)
On Mon, 6 Apr 2009, Stefan Herbrechtsmeier wrote:
> Add a driver for the OmniVision ov9655 camera sensor.
> The driver use the soc_camera framework.
> It was tested on the BeBot robot with a PXA270 processor.
>
> Signed-off-by: Stefan Herbrechtsmeier <[email protected] <mailto:[email protected]>>
Hans, does it make sense to include this one or shall we wait for gspca on
this one too?
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
<mailto:[email protected]>
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
