Hi hermann,
hermann-pit...@arcor.de said: > There is no way to detect which sort of such a LNA circuitry is employed. > Just try and error and pray. Also no further documentation for the changing > code itself and only some comments by Hartmut on the lists. > > In case config = 1 gpio0 of the tda827x is involved, on others a gpio pin of > the saa7134 and some registers. > > It was already broken when tuner callback stuff for XCeive tuners was > introduced and firmware loading for those. > > Guess the problem is to get the gpio change to the tda827x through. > > Hartmut came up with this fix that time you get with "hg export 7393". > (attached) > > I did not even have any such a LNA device at this time, but might be > interesting if this snapshot really works for you. Still have only one type 2 > device now. > > If I look through hg log > hg.log, the only somehow related later change by > Hartmut was this one. (link points to Hartmut's repo) > > http://linuxtv.org/hg/~hhackmann/v4l-dvb/rev/779169257208 > > And last entry is that compile warning fix on top for int mask not removed at > once. Should all be only saa7134 gpio related. I had a look at the diff you attached, and it made me a bit confuse. Most (all?) of it seem to be already applied in later kernels (>2.6.26), and they all fail on me. however, looking through the diff, I sumbled on the dprink's and I started to enable them on all modules I thought relevant. Here's a diff between the last -good and first-bad commit. The salient differences I can see is the "AGC2 gain" and the "setting GPIO22 to vsync 0". I have no clue what they mean, but my next step is to see if I can kill these differences. Is thee anything else in there which you find note worthy? Rgds, /Anders PS What is the tda829x doing? I see some differences there too. $ diff -u dmesg_2.6.25-03{6,7}* --- dmesg_2.6.25-03622-g1fe87369 2009-05-04 21:32:37.000000000 +0200 +++ dmesg_2.6.25-03774-g99e09ea 2009-05-04 21:37:06.000000000 +0200 @@ -42,14 +42,13 @@ tda829x 1-004b: tda827xa config is 0x01 tda827x: setting tda827x to system xx tda827x: setting LNA to high gain -saa7133[0]/core: setting GPIO22 to vsync 0 -tda827x: AGC2 gain is: 3 +tda827x: AGC2 gain is: 10 tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? -tda829x 1-004b: adjust gain, step 1. Agc: 0, ADC stat: 0, lock: 0 -tda829x 1-004b: adjust gain, step 2. Agc: 131, lock: 0 -tda829x 1-004b: adjust gain, step 3. Agc: 44 +tda829x 1-004b: adjust gain, step 1. Agc: 0, ADC stat: 1, lock: 0 +tda829x 1-004b: adjust gain, step 2. Agc: 255, lock: 0 +tda829x 1-004b: adjust gain, step 3. Agc: 235 tuner' 1-004b: saa7133[0] tuner' I2C addr 0x96 with type 54 used for 0x0e saa7133[0]/core: hwinit2 tuner' 1-004b: switching to v4l2 @@ -58,8 +57,7 @@ tda829x 1-004b: tda827xa config is 0x01 tda827x: setting tda827x to system B tda827x: setting LNA to high gain -saa7133[0]/core: setting GPIO22 to vsync 0 -tda827x: AGC2 gain is: 3 +tda827x: AGC2 gain is: 10 tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? @@ -68,14 +66,13 @@ tda829x 1-004b: tda827xa config is 0x01 tda827x: setting tda827x to system B tda827x: setting LNA to high gain -saa7133[0]/core: setting GPIO22 to vsync 0 -tda827x: AGC2 gain is: 3 +tda827x: AGC2 gain is: 10 tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: adjust gain, step 1. Agc: 136, ADC stat: 40, lock: 0 -tda829x 1-004b: adjust gain, step 2. Agc: 0, lock: 0 -tda829x 1-004b: adjust gain, step 3. Agc: 248 +tda829x 1-004b: adjust gain, step 2. Agc: 126, lock: 0 +tda829x 1-004b: adjust gain, step 3. Agc: 35 saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 @@ -90,15 +87,19 @@ DVB: registering frontend 0 (Philips TDA10046H DVB-T)... tda827x: setting tda827x to system B tda827x: setting LNA to high gain -saa7133[0]/core: setting GPIO22 to vsync 0 tda1004x: setting up plls for 48MHz sampling clock -tda827x: AGC2 gain is: 3 +tda827x: AGC2 gain is: 10 +tda1004x: found firmware revision 20 -- ok +tda827x: tda827xa tuner found +tda827x: tda827xa_sleep: +saa7134 ALSA driver for DMA sound loaded +saa7133[0]/alsa: saa7133[0] at 0xfdeff000 irq 21 registered as card -1 tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: adjust gain, step 1. Agc: 0, ADC stat: 1, lock: 0 -tda829x 1-004b: adjust gain, step 2. Agc: 255, lock: 0 -tda829x 1-004b: adjust gain, step 3. Agc: 202 +tda829x 1-004b: adjust gain, step 2. Agc: 128, lock: 0 +tda829x 1-004b: adjust gain, step 3. Agc: 128 tuner' 1-004b: Cmd TUNER_SET_STANDBY accepted for analog TV tuner' 1-004b: Cmd VIDIOC_S_STD accepted for analog TV tuner' 1-004b: tv freq set to 400.00 @@ -106,17 +107,13 @@ tda829x 1-004b: tda827xa config is 0x01 tda827x: setting tda827x to system B tda827x: setting LNA to high gain -saa7133[0]/core: setting GPIO22 to vsync 0 -tda827x: AGC2 gain is: 3 +tda827x: AGC2 gain is: 10 tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? -tda829x 1-004b: adjust gain, step 1. Agc: 0, ADC stat: 0, lock: 0 -tda829x 1-004b: adjust gain, step 2. Agc: 135, lock: 0 -tda1004x: timeout waiting for DSP ready -tda1004x: found firmware revision 0 -- invalid -tda1004x: trying to boot from eeprom -tda829x 1-004b: adjust gain, step 3. Agc: 22 +tda829x 1-004b: adjust gain, step 1. Agc: 0, ADC stat: 1, lock: 0 +tda829x 1-004b: adjust gain, step 2. Agc: 255, lock: 0 +tda829x 1-004b: adjust gain, step 3. Agc: 243 tuner' 1-004b: Cmd TUNER_SET_STANDBY accepted for analog TV tuner' 1-004b: Cmd AUDC_SET_RADIO accepted for radio tuner' 1-004b: radio freq set to 87.50 @@ -124,18 +121,8 @@ tda829x 1-004b: tda827xa config is 0x01 tda827x: setting tda827x to system B tda827x: setting LNA to high gain -saa7133[0]/core: setting GPIO22 to vsync 0 tda827x: AGC2 gain is: 10 tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? tuner' 1-004b: Cmd TUNER_SET_STANDBY accepted for radio -tda1004x: timeout waiting for DSP ready -tda1004x: found firmware revision 0 -- invalid -tda1004x: waiting for firmware upload... -tda1004x: found firmware revision 20 -- ok -tda827x: tda827xa tuner found -tda827x: tda827xa_sleep: -saa7134 ALSA driver for DMA sound loaded -saa7133[0]/alsa: saa7133[0] at 0xfdeff000 irq 21 registered as card -1 - -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
