On Sat, 2009-06-20 at 15:23 -0400, Andy Walls wrote: > On Fri, 2009-06-19 at 23:38 -0500, Theodore Kilgore wrote: > > > >> > > >> Now it is using the other pair of endpoints, 0x03 and 0x84. > > > > > > Hmmmm. I wonder if we can use them anyway, without being connected in > > > "webcam" mode. > > > > Nope. That was the previously mentioned bug in the Linux mass storage > > driver. Namely the spec calls for using the first pair of endpoints > > encountered. The bug consisted of the mass storage driver looking for the > > last pair of endpoints encountered, instead. This was back around kernel > > 2.6.18 or so when the problem got fixed. > > > > The second pair of endpoints appears to be very much disconnected in mass > > storage mode. The attempt to use them will result only in a string of > > error messages. How well I remember. As to whether the first pair can be > > used in webcam mode, I clearly have not tried to use them, but I would > > have strong doubts whether it is even worth trying. Even if they would > > work, what on earth would they be good for? > > Just not having to disconnect the cam to get at the files on it. It'll > probably be too much for the cheap device to deal with though. > > > It is interesting to note that the transfer logic of the the device > seems to be oriented around a 512 byte block size - the defacto disk > block size. > > > > >> There is a sequence of init commands > > >> > > >> 00000000: 71 81 > > >> 00000000: 70 05 > > >> 00000000: 95 70 > > >> 00000000: 00 (all the 00 are responses) > > >> 00000000: 71 81 > > >> 00000000: 70 04 > > >> 00000000: 95 70 > > >> 00000000: 00 > > >> 00000000: 71 00 > > >> 00000000: 70 08 > > >> 00000000: 95 70 > > >> 00000000: 00 > > >> 00000000: 94 02 > > >> 00000000: de 24 > > >> 00000000: 94 02 > > >> 00000000: dd f0 > > >> 00000000: 94 02 > > >> 00000000: e3 2c > > >> 00000000: 94 02 > > >> 00000000: e4 00 > > >> 00000000: 94 02 > > >> 00000000: e5 00 > > >> 00000000: e5 00 > > >> 00000000: 94 02 > > >> 00000000: e6 2c > > >> 00000000: 94 03 > > >> 00000000: aa 00 > > >> 00000000: 71 1e > > >> 00000000: 70 06 > > >> 00000000: 71 80 > > >> 00000000: 70 07 > > >> > > >> and then it starts to stream. The stream downloads 0x200 (512) bytes at a > > >> time. It appears that there is an SOF marker consisting of > > >> > > >> ff ff ff ff > > >> > > >> followed by at least two zeroes. These seem to occur only at the > > >> beginnings of some of the downloaded 0x200-sized blocks. > > > > > > Given that the AVI file is 320x240 @ 20 fps Motion JPEG, maybe the > > > streaming mode uses something similar. > > > > > > Assuming 6 bit RGB values at 320x240 @ 20 fps: > > > > > > (320*240) * 24 bpp * 20 fps = 36.864 Mbps > > > > > > Since this USB 1.1, I'm guessing the stream has to be compressed. > > > > Sure looks that way. I took a closer look at the lines starting with ff ff > > ff ff strings, and I found a couple more things. Here are several lines > > from an extract from that snoop, consisting of what appear to be > > consecutive SOF lines. > > > > 00000000: ff ff ff ff 00 00 1c 70 3c 00 0f 01 00 00 00 00 > > 00000000: ff ff ff ff 00 00 34 59 1e 00 1b 06 00 00 00 00 > > 00000000: ff ff ff ff 00 00 36 89 1e 00 1c 07 00 00 00 00 > > 00000000: ff ff ff ff 00 00 35 fc 1e 00 1b 08 00 00 00 00 > > 00000000: ff ff ff ff 00 00 35 84 1e 00 1b 09 00 00 00 00 > > > > The last non-zero byte is a frame counter. Presumably, the gap between the > > 01 and the 06 occurs because the camera was just then starting up and > > things were a bit chaotic. The rest of the lines in the file are > > completely consistent, counting consecutively from 09 to 49 (hex, of > > course) at which point I killed the stream. > > > > The byte previous to that one (reading downwards 0f 1b 1c 1b 1b ...) gives > > the number of 0x200-byte blocks in that frame, before the next marker > > comes along. So if we start from the frame labeled "06" then from there on > > the frames are approximately the same size, but not identical. For example > > the size of frame 06 is 0x1b*0x200. That is, 27*512 bytes. > > > > I am not sure what the other numbers mean. Perhaps you have better guesses > > than I do. > > The first few become easy given your observations. They are the actaul > payload size: > > ceil(0x1c70/0x200) = ceil(0x0e.380) = 0x0f > ceil(0x3549/0x200) = ceil(0x1a.a48) = 0x1b > ceil(0x3689/0x200) = ceil(0x1b.448) = 0x1c > ceil(0x35fc/0x200) = ceil(0x1a.fe0) = 0x1b > ceil(0x3584/0x200) = ceil(0x1a.c20) = 0x1b > > The lone 0x3c and the 0x1e's are not so easy: > > 0x3c = 60 > 0x1e = 30 > > Maybe an inidcation of frame rate? > > I'll try and think about them a little more.
For your camera, these numbers appear to indicate a frequency and can be decoded into a time period like this: 1000/0x1e00 = 130 ms 1000/0x3c00 = 65 ms I'm assuming it's some sort of presentation frame rate. > > >> > > >> 00000000: 71 00 > > >> 00000000: 70 09 > > >> 00000000: 71 80 > > >> 00000000: 70 05 > > >> > > >> It would be interesting to see your log file and to compare. I could also > > >> send you this one if you are curious, but it is 5,760,902 bytes so I > > >> should ask that if you want to see it then how to send it? Me, I suspect > > >> that if you have one of similar size and bz2 it and send it to me as an > > >> attachment, then it is not any problem. > > > > > > You could send it to me via email (my ISP bounces *really* big incoming > > > emails but at least 6 MB email can make it through). However, without > > > the "source" of the image, it might be a little hard to decode the dump. > > > Here's the init for my camera: 0000: 71 81 0000: 70 05 0000: 95 70 0000: 00 0000: 71 81 0000: 70 04 0000: 95 70 0000: 00 0000: 71 00 0000: 70 08 0000: 95 70 0000: 00 0000: 94 02 0000: de 24 0000: 94 02 0000: dd f0 0000: 94 02 0000: e3 22 <--- different 0000: 94 02 0000: e4 00 0000: 94 02 0000: e5 00 <--- not repeated like in the sequence above 0000: 94 02 0000: e6 22 <--- different 0000: 94 03 0000: aa 01 <--- different 0000: 71 1e 0000: 70 06 0000: 71 80 0000: 70 07 And here's the terminal sequence: 0000: 71 00 0000: 70 09 0000: 71 80 0000: 70 05 They look amazingly similar to yours. Here are the buffers with the supposed SOF marker: 0000: ff ff ff ff 00 00 18 43 1e 00 0d fa 00 00 00 00 0000: ff ff ff ff 00 00 18 26 1e 00 0d 00 00 00 00 00 0000: ff ff ff ff 00 00 17 fa 1e 00 0c 01 00 00 00 00 0000: ff ff ff ff 00 00 18 4e 1e 00 0d 02 00 00 00 00 0000: ff ff ff ff 00 00 18 91 1e 00 0d 03 00 00 00 00 0000: ff ff ff ff 00 00 18 90 1e 00 0d 04 00 00 00 00 0000: ff ff ff ff 00 00 18 4b 1e 00 0d 05 00 00 00 00 0000: ff ff ff ff 00 00 18 8a 1e 00 0d 06 00 00 00 00 Again very similar. I had the camera pointed at a mostly white test target with some large blue numbers printed on it, so the sammler buffers probably just indicate how simple the test target was. The frames from my camera were coming at 100 ms intervals instead of 130 ms intervals. So maybe some scaling constant has changed with my supposed frame presentation frequency field that contains 0x1e00. I will send you a text capture of the data from SnoopyPro in a private email. Regards, Andy -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
