On Fri, Jun 26, 2009 at 7:50 AM, Andy Walls<[email protected]> wrote: > I use either v4l2-ctl or ivtv-tune > > $ ivtv-tune -d /dev/video0 -t us-bcast -c 3 > /dev/video0: 61.250 MHz > > $ v4l2-ctl -d /dev/video0 -f 61.250 > Frequency set to 980 (61.250000 MHz) > > > Regards, > Andy
Hello Andy, I had sent George some email off-list with basically the same commands. I think what might be happening here is the tuner gets powered down when not in use, so I think it might be powered down between the v4l-ctl command and the running of the other application. I have sent him a series of commands to try where he modprobes the xc3028 driver with "no_poweroff=1", and we will see if that starts working. Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
