Hi Acano,
Em Sat, 18 Jul 2009 13:37:58 -0400
[email protected] escreveu:
> @@ -1950,6 +1950,10 @@ void em28xx_pre_card_setup(struct em28xx
> /* FIXME guess */
> /* Turn on analog audio output */
> em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
This is legacy. While here, it is better to move the gpio setup it to the
proper place.
> +
> + /* enable audio 12mhz i2s */
> + em28xx_write_reg(dev, EM28XX_R0F_XCLK, 0xa7);
Instead of writing directly at xclk, the best is to initialize its value at
the boards struct.
> + dev->i2s_speed = 2048000;
> break;
> case EM2861_BOARD_KWORLD_PVRTV_300U:
> case EM2880_BOARD_KWORLD_DVB_305U:
> diff -r 27ddf3fe0ed9 linux/drivers/media/video/em28xx/em28xx-video.c
> --- a/linux/drivers/media/video/em28xx/em28xx-video.c Wed Jun 17 04:38:12
> 2009 +0000
> +++ b/linux/drivers/media/video/em28xx/em28xx-video.c Sat Jul 18 13:32:04
> 2009 -0400
> @@ -1087,9 +1087,12 @@ static int vidioc_s_ctrl(struct file *fi
>
> mutex_lock(&dev->lock);
>
> - if (dev->board.has_msp34xx)
> + if (dev->board.has_msp34xx) {
> + /*FIXME hack to unmute usb audio stream */
> + em28xx_set_ctrl(dev, ctrl);
Hmm... this function were removed. In thesis, you shouldn't need to do anything
to unmute.
> +
> v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_ctrl, ctrl);
> - else {
> + } else {
> rc = 1;
> for (i = 0; i < ARRAY_SIZE(em28xx_qctrl); i++) {
> if (ctrl->id == em28xx_qctrl[i].id) {
Could you please try the enclosed patch and see if this is enough to fix for
Plextor? If so, please send me a Tested-by: tag for me to add it at 2.6.31 fix
patches.
Cheers,
Mauro
em28xx: fix audio on Plextor PX-TV100U
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c
b/linux/drivers/media/video/em28xx/em28xx-cards.c
--- a/linux/drivers/media/video/em28xx/em28xx-cards.c
+++ b/linux/drivers/media/video/em28xx/em28xx-cards.c
@@ -639,22 +639,27 @@ struct em28xx_board em28xx_boards[] = {
},
[EM2861_BOARD_PLEXTOR_PX_TV100U] = {
.name = "Plextor ConvertX PX-TV100U",
- .valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_TNF_5335MF,
+ .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
+ EM28XX_XCLK_FREQUENCY_12MHZ,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_TVP5150,
+ .has_msp34xx = 1,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
+ .gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
+ .gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
+ .gpio = pinnacle_hybrid_pro_analog,
} },
},
@@ -1948,9 +1953,8 @@ void em28xx_pre_card_setup(struct em28xx
/* request some modules */
switch (dev->model) {
case EM2861_BOARD_PLEXTOR_PX_TV100U:
- /* FIXME guess */
- /* Turn on analog audio output */
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+ /* Sets the msp34xx I2S speed */
+ dev->i2s_speed = 2048000;
break;
case EM2861_BOARD_KWORLD_PVRTV_300U:
case EM2880_BOARD_KWORLD_DVB_305U:
Cheers,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
