Em Sun, 13 Sep 2009 15:13:04 +0900 Nathaniel Kim <dongsoo....@gmail.com> escreveu:
> > 2009. 9. 12., 오전 7:21, Hans Verkuil 작성: > > > Hi all, > > > > I've started this as a new thread to prevent polluting the > > discussions of the > > media controller as a concept. > > > > First of all, I have no doubt that everything that you can do with > > an ioctl, > > you can also do with sysfs and vice versa. That's not the problem > > here. > > > > The problem is deciding which approach is the best. > > > > What is sysfs? (taken from http://lwn.net/Articles/31185/) > > > > "Sysfs is a virtual filesystem which provides a userspace-visible > > representation > > of the device model. The device model and sysfs are sometimes > > confused with each > > other, but they are distinct entities. The device model functions > > just fine > > without sysfs (but the reverse is not true)." > > > > Currently both a v4l driver and the device nodes are all represented > > in sysfs. > > This is handled automatically by the kernel. > > > > Sub-devices are not represented in sysfs since they are not based on > > struct > > device. They are v4l-internal structures. Actually, if the subdev > > represents > > an i2c device, then that i2c device will be present in sysfs, but > > not all > > subdevs are i2c devices. > > > > Should we make all sub-devices based on struct device? Currently > > this is not > > required. Doing this would probably mean registering a virtual bus, > > then > > attaching the sub-device to that. Of course, this only applies to > > sub-devices > > that represent something that is not an i2c device (e.g. something > > internal > > to the media board like a resizer, or something connected to GPIO > > pins). > > > > If we decide to go with sysfs, then we have to do this. This part > > shouldn't > > be too difficult to implement. And also if we do not go with sysfs > > this might > > be interesting to do eventually. > > > > The media controller topology as I see it should contain the device > > nodes > > since the application has to know what device node to open to do the > > streaming. > > It should also contain the sub-devices so the application can > > control them. > > Is this enough? I think that eventually we also want to show the > > physical > > connectors. I left them out (mostly) from the initial media > > controller proposal, > > but I suspect that we want those as well eventually. But connectors > > are > > definitely not devices. In that respect the entity concept of the > > media > > controller is more abstract than sysfs. > > > > However, for now I think we can safely assume that sub-devices can > > be made > > visible in sysfs. > > > > Hans, > > First of all I'm very sorry that I had not enough time to go through > your new RFC. I'll checkout right after posting this mail. > > I think this is a good approach and I also had in my mind that sysfs > might be a good method if we could control and monitor through this. > Recalling memory when we had a talk in San Francisco, I was frustrated > that there is no way to catch events from sort of sub-devices like > lens actuator (I mean pizeo motors in camera module). As you know lens > actuator is an extremely slow device in comparison with common v4l2 > devices we are using and we need to know whether it has succeeded or > not in moving to expected position. > So I considered sysfs and udev as candidates for catching events from > sub-devices. events like success/failure of lens movement, change of > status of subdevices. > Does anybody experiencing same issue? I think I've seen a lens > controller driver in omap3 kernel from TI but not sure how did they > control that. > > My point is that we need a kind of framework to give and event to user > space and catching them properly just like udev does. Maybe the Kernel event interface could be used for that. > Cheers, > > Nate > > = > DongSoo, Nathaniel Kim > Engineer > Mobile S/W Platform Lab. > Digital Media & Communications R&D Centre > Samsung Electronics CO., LTD. > e-mail : dongsoo....@gmail.com > dongsoo45....@samsung.com-- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html Cheers, Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
