Move the v4l2 clocks stuff from v4l2-framework to a separate file and adds an attention that came from the v4l2-clk.h.
Note: as this is meant to be a temporary kAPI, and it is used only by two drivers (soc_camera and em28xx), where the first one is in deprecation process, it probably not a worth effort to document its header. Signed-off-by: Mauro Carvalho Chehab <mche...@s-opensource.com> --- Documentation/media/kapi/v4l2-clocks.rst | 29 +++++++++++++++++++++++++++++ Documentation/media/kapi/v4l2-core.rst | 1 + Documentation/media/kapi/v4l2-framework.rst | 25 ------------------------- 3 files changed, 30 insertions(+), 25 deletions(-) create mode 100644 Documentation/media/kapi/v4l2-clocks.rst diff --git a/Documentation/media/kapi/v4l2-clocks.rst b/Documentation/media/kapi/v4l2-clocks.rst new file mode 100644 index 000000000000..b8a895860a8a --- /dev/null +++ b/Documentation/media/kapi/v4l2-clocks.rst @@ -0,0 +1,29 @@ +V4L2 clocks +----------- + +.. attention:: + + This is a temporary API and it shall be replaced by the generic + clock API, when the latter becomes widely available. + +Many subdevices, like camera sensors, TV decoders and encoders, need a clock +signal to be supplied by the system. Often this clock is supplied by the +respective bridge device. The Linux kernel provides a Common Clock Framework for +this purpose. However, it is not (yet) available on all architectures. Besides, +the nature of the multi-functional (clock, data + synchronisation, I2C control) +connection of subdevices to the system might impose special requirements on the +clock API usage. E.g. V4L2 has to support clock provider driver unregistration +while a subdevice driver is holding a reference to the clock. For these reasons +a V4L2 clock helper API has been developed and is provided to bridge and +subdevice drivers. + +The API consists of two parts: two functions to register and unregister a V4L2 +clock source: v4l2_clk_register() and v4l2_clk_unregister() and calls to control +a clock object, similar to the respective generic clock API calls: +v4l2_clk_get(), v4l2_clk_put(), v4l2_clk_enable(), v4l2_clk_disable(), +v4l2_clk_get_rate(), and v4l2_clk_set_rate(). Clock suppliers have to provide +clock operations that will be called when clock users invoke respective API +methods. + +It is expected that once the CCF becomes available on all relevant +architectures this API will be removed. diff --git a/Documentation/media/kapi/v4l2-core.rst b/Documentation/media/kapi/v4l2-core.rst index 67eaf0c0b6b6..c69d167bce7a 100644 --- a/Documentation/media/kapi/v4l2-core.rst +++ b/Documentation/media/kapi/v4l2-core.rst @@ -9,6 +9,7 @@ Video2Linux devices v4l2-controls v4l2-device v4l2-fh + v4l2-clocks v4l2-dv-timings v4l2-event v4l2-flash-led-class diff --git a/Documentation/media/kapi/v4l2-framework.rst b/Documentation/media/kapi/v4l2-framework.rst index 8b4f684e1a7a..7f4f26e666a2 100644 --- a/Documentation/media/kapi/v4l2-framework.rst +++ b/Documentation/media/kapi/v4l2-framework.rst @@ -79,28 +79,3 @@ and the v4l2_fh struct keeps track of filehandle instances. The V4L2 framework also optionally integrates with the media framework. If a driver sets the struct v4l2_device mdev field, sub-devices and video nodes will automatically appear in the media framework as entities. - -V4L2 clocks ------------ - -Many subdevices, like camera sensors, TV decoders and encoders, need a clock -signal to be supplied by the system. Often this clock is supplied by the -respective bridge device. The Linux kernel provides a Common Clock Framework for -this purpose. However, it is not (yet) available on all architectures. Besides, -the nature of the multi-functional (clock, data + synchronisation, I2C control) -connection of subdevices to the system might impose special requirements on the -clock API usage. E.g. V4L2 has to support clock provider driver unregistration -while a subdevice driver is holding a reference to the clock. For these reasons -a V4L2 clock helper API has been developed and is provided to bridge and -subdevice drivers. - -The API consists of two parts: two functions to register and unregister a V4L2 -clock source: v4l2_clk_register() and v4l2_clk_unregister() and calls to control -a clock object, similar to the respective generic clock API calls: -v4l2_clk_get(), v4l2_clk_put(), v4l2_clk_enable(), v4l2_clk_disable(), -v4l2_clk_get_rate(), and v4l2_clk_set_rate(). Clock suppliers have to provide -clock operations that will be called when clock users invoke respective API -methods. - -It is expected that once the CCF becomes available on all relevant -architectures this API will be removed. -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html