Add the document for ov5645 device tree binding.

Signed-off-by: Todor Tomov <todor.to...@linaro.org>
---
 .../devicetree/bindings/media/i2c/ov5645.txt       | 52 ++++++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5645.txt

diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt 
b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
new file mode 100644
index 0000000..bcf6dba
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
@@ -0,0 +1,52 @@
+* Omnivision 1/4-Inch 5Mp CMOS Digital Image Sensor
+
+The Omnivision OV5645 is a 1/4-Inch CMOS active pixel digital image sensor with
+an active array size of 2592H x 1944V. It is programmable through a serial I2C
+interface.
+
+Required Properties:
+- compatible: Value should be "ovti,ov5645".
+- clocks: Reference to the xclk clock.
+- clock-names: Should be "xclk".
+- clock-frequency: Frequency of the xclk clock.
+- enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH.
+- reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW.
+- vdddo-supply: Chip digital IO regulator.
+- vdda-supply: Chip analog regulator.
+- vddd-supply: Chip digital core regulator.
+
+The device node must contain one 'port' child node for its digital output
+video port, in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+       &i2c1 {
+               ...
+
+               ov5645: ov5645@78 {
+                       compatible = "ovti,ov5645";
+                       reg = <0x78>;
+
+                       enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+                       reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&camera_rear_default>;
+
+                       clocks = <&clks 200>;
+                       clock-names = "xclk";
+                       clock-frequency = <23880000>;
+
+                       vdddo-supply = <&camera_dovdd_1v8>;
+                       vdda-supply = <&camera_avdd_2v8>;
+                       vddd-supply = <&camera_dvdd_1v2>;
+
+                       port {
+                               ov5645_ep: endpoint {
+                                       clock-lanes = <1>;
+                                       data-lanes = <0 2>;
+                                       remote-endpoint = <&csi0_ep>;
+                               };
+                       };
+               };
+       };
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to