Hi Philipp,
Thank you for the patch.
On Monday 07 Nov 2016 21:15:47 Philipp Zabel wrote:
> The Rift CV1 Sensor has bInterfaceClass set to vendor specific, so we
> need an entry in uvc_ids to probe it. Just as the Rift DK2 IR tracker,
> it misreports the pixel format as YUYV instead of Y8.
>
> The sensor is configured with a low exposure time and high black level
> by default, so that only bright IR sources can be seen.
>
> Signed-off-by: Philipp Zabel <philipp.za...@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
and applied to my tree, after fixing the conflict (see below).
> ---
> drivers/media/usb/uvc/uvc_driver.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/drivers/media/usb/uvc/uvc_driver.c
> b/drivers/media/usb/uvc/uvc_driver.c index 0eaa9a9..b64bfe4 100644
> --- a/drivers/media/usb/uvc/uvc_driver.c
> +++ b/drivers/media/usb/uvc/uvc_driver.c
> @@ -2583,6 +2583,15 @@ static struct usb_device_id uvc_ids[] = {
> .bInterfaceSubClass = 1,
> .bInterfaceProtocol = 0,
> .driver_info = UVC_QUIRK_FORCE_Y8 },
> + /* Oculus VR Rift Sensor */
> + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
> + | USB_DEVICE_ID_MATCH_INT_INFO,
> + .idVendor = 0x2833,
> + .idProduct = 0x0211,
> + .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
> + .bInterfaceSubClass = 1,
> + .bInterfaceProtocol = 0,
> + .driver_info = UVC_QUIRK_FORCE_Y8 },
> /* Leap Motion Controller LM-010 */
That's not in mainline, where does it come from ?
> { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
>
> | USB_DEVICE_ID_MATCH_INT_INFO,
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
