Power on the sensor when the module is loaded and power it off when it is
removed.

Signed-off-by: Sakari Ailus <sakari.ai...@linux.intel.com>
---
Hi Arnd and others,

The patch is tested with CONFIG_PM set, as the system does I was testing
on did not boot with CONFIG_PM disabled. I'm not really too worried about
this though, the patch is very simple.

Kind regards,
Sakari

 drivers/media/i2c/smiapp/smiapp-core.c | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/drivers/media/i2c/smiapp/smiapp-core.c 
b/drivers/media/i2c/smiapp/smiapp-core.c
index 59872b3..8624dc4 100644
--- a/drivers/media/i2c/smiapp/smiapp-core.c
+++ b/drivers/media/i2c/smiapp/smiapp-core.c
@@ -2741,8 +2741,6 @@ static const struct v4l2_subdev_internal_ops 
smiapp_internal_ops = {
  * I2C Driver
  */
 
-#ifdef CONFIG_PM
-
 static int smiapp_suspend(struct device *dev)
 {
        struct i2c_client *client = to_i2c_client(dev);
@@ -2783,13 +2781,6 @@ static int smiapp_resume(struct device *dev)
        return rval;
 }
 
-#else
-
-#define smiapp_suspend NULL
-#define smiapp_resume  NULL
-
-#endif /* CONFIG_PM */
-
 static struct smiapp_hwconfig *smiapp_get_hwconfig(struct device *dev)
 {
        struct smiapp_hwconfig *hwcfg;
@@ -2915,7 +2906,11 @@ static int smiapp_probe(struct i2c_client *client,
 
        pm_runtime_enable(&client->dev);
 
+#ifdef CONFIG_PM
        rval = pm_runtime_get_sync(&client->dev);
+#else
+       rval = smiapp_power_on(&client->dev);
+#endif
        if (rval < 0) {
                rval = -ENODEV;
                goto out_power_off;
@@ -3113,7 +3108,11 @@ static int smiapp_probe(struct i2c_client *client,
        smiapp_cleanup(sensor);
 
 out_power_off:
+#ifdef CONFIG_PM
        pm_runtime_put(&client->dev);
+#else
+       smiapp_power_off(&client->dev);
+#endif
        pm_runtime_disable(&client->dev);
 
        return rval;
@@ -3127,7 +3126,11 @@ static int smiapp_remove(struct i2c_client *client)
 
        v4l2_async_unregister_subdev(subdev);
 
+#ifdef CONFIG_PM
        pm_runtime_suspend(&client->dev);
+#else
+       smiapp_power_off(&client->dev);
+#endif
        pm_runtime_disable(&client->dev);
 
        for (i = 0; i < sensor->ssds_used; i++) {
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to