On Tue, Nov 22, 2016 at 11:35:06AM -0200, Mauro Carvalho Chehab wrote: > Em Wed, 9 Nov 2016 16:13:35 +0000 > Sean Young <s...@mess.org> escreveu: > > > The bits are sent in lsb first. Hardware decoders also send nec32 > > in this order (e.g. dib0700). This should be consistent, however > > I have no way of knowing which order the LME2510 and Tivo keymaps > > are (the only two kernel keymaps with NEC32). > > Hmm.. the lme2510 receives the scancode directly. So, this > patch shouldn't affect it. So, we're stuck with the Tivo IR. > > On Tivo, only a few keys (with duplicated scancodes) don't start with > 0xa10c. So, it *seems* that this is an address. > > The best here would be to try to get a Tivo remote controller[1], and > do some tests with a driver that has a hardware decoder capable of > output NEC32 data, and some driver that receives raw IR data in > order to be sure. > > In any case, we need to patch both the NEC32 decoder and the table > at the same time, to be 100% sure. > > [1] or some universal remote controller that could emulate > the Tivo's scan codes. I suspect that the IR in question is > this one, but maybe Jarod could shed some light here: > > https://www.amazon.com/TiVo-Remote-Control-Universal-Replacement/dp/B00DYYKA04
Been away from the game for a few years now, so there are a good number of cobwebs in this section of my brain... I'm pretty sure I do have both a remote and receiver on hand that would fit the bill here though. Is the question primarily about what actually gets emitted by the TiVo remote? -- Jarod Wilson ja...@redhat.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
