Hi Hans, On Fri, 2017-01-20 at 15:54 +0100, Hans Verkuil wrote: > Looks good to me. > > Philipp, just let me know if this is ready for merging, or you can make a pull > request for Mauro yourself if you prefer.
Yes, with the recent fixes I think this is ready for merging. If you don't mind picking it up, please go ahead. regards Philipp > Regards, > > Hans > > On 01/20/2017 03:00 PM, Michael Tretter wrote: > > Hello, > > > > This is v4 of a patch series that adds support for the Video Data Order > > Adapter (VDOA) that can be found on Freescale i.MX6. It converts the > > macroblock tiled format produced by the CODA 960 video decoder to a > > raster-ordered format for scanout. > > > > Changes since v3: > > > > - Patch 2/7: Add my copyright to vdoa copyright header > > - Patch 2/7: Fix offset of chroma plane to be page-aligned > > - Patch 6/7: Fix oops when releasing the coda driver by destroying vdoa > > context after removing all buffers > > - Patch 6/7: Fix missing vdoa disable when switching from tiled to linear > > format > > > > Changes since v2: > > > > - Patch 1/7: Update commit message to include binding change; fix > > spelling/style in binding documentation > > > > Changes since v1: > > > > - Dropped patch 8/9 of v1 > > - Patch 1/7: Add devicetree binding documentation for fsl-vdoa > > - Patch 6/7: I merged patch 5/9 and patch 8/9 of v1 into a single patch > > - Patch 6/7: Use dt compatible instead of a phandle to find VDOA device > > - Patch 6/7: Always check VDOA availability even if disabled via module > > parameter and do not print a message if VDOA cannot be found > > - Patch 6/7: Do not change the CODA context in coda_try_fmt() > > - Patch 6/7: Allocate an additional internal frame if the VDOA is in use > > > > Michael Tretter (3): > > [media] coda: fix frame index to returned error > > [media] coda: use VDOA for un-tiling custom macroblock format > > [media] coda: support YUYV output if VDOA is used > > > > Philipp Zabel (4): > > [media] dt-bindings: Add a binding for Video Data Order Adapter > > [media] coda: add i.MX6 VDOA driver > > [media] coda: correctly set capture compose rectangle > > [media] coda: add debug output about tiling > > > > .../devicetree/bindings/media/fsl-vdoa.txt | 21 ++ > > arch/arm/boot/dts/imx6qdl.dtsi | 2 + > > drivers/media/platform/Kconfig | 3 + > > drivers/media/platform/coda/Makefile | 1 + > > drivers/media/platform/coda/coda-bit.c | 93 ++++-- > > drivers/media/platform/coda/coda-common.c | 175 ++++++++++- > > drivers/media/platform/coda/coda.h | 3 + > > drivers/media/platform/coda/imx-vdoa.c | 338 > > +++++++++++++++++++++ > > drivers/media/platform/coda/imx-vdoa.h | 58 ++++ > > 9 files changed, 652 insertions(+), 42 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/media/fsl-vdoa.txt > > create mode 100644 drivers/media/platform/coda/imx-vdoa.c > > create mode 100644 drivers/media/platform/coda/imx-vdoa.h > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
