Hi Pavel,
Thank you for the patch.
On Wednesday 08 Feb 2017 13:57:38 Pavel Machek wrote:
> Obtain the CSI1/CCP2 bus parameters from the OF node.
>
> ISP CSI1 module needs all the bits correctly set to work.
>
> OMAP3430 needs various syscon CONTROL_CSIRXFE bits set in order to
> operate. Implement the missing functionality.
>
> Signed-off-by: Sakari Ailus <sakari.ai...@iki.fi>
> Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov...@gmail.com>
> Signed-off-by: Pavel Machek <pa...@ucw.cz>
>
> ---
>
> > How about the rest? :-) I guess we could get the CCP2 support in omap3isp
> > without the video bus switch. It'd be nice to have this in a single
> > patchset.
>
> Ok, here you go, what about this?
>
> Pavel
>
> diff --git a/drivers/media/platform/omap3isp/isp.c
> b/drivers/media/platform/omap3isp/isp.c index 0321d84..88bc7c6 100644
> --- a/drivers/media/platform/omap3isp/isp.c
> +++ b/drivers/media/platform/omap3isp/isp.c
> @@ -2024,21 +2024,92 @@ enum isp_of_phy {
> ISP_OF_PHY_CSIPHY2,
> };
>
> -static int isp_of_parse_node(struct device *dev, struct device_node *node,
> - struct isp_async_subdev *isd)
> +void __isp_of_parse_node_csi1(struct device *dev,
> + struct isp_ccp2_cfg *buscfg,
> + struct v4l2_of_endpoint *vep)
This function isn't use anywhere else, you can merge it with
isp_of_parse_node_csi1().
> +{
> + buscfg->lanecfg.clk.pos = vep->bus.mipi_csi1.clock_lane;
> + buscfg->lanecfg.clk.pol =
> + vep->bus.mipi_csi1.lane_polarity[0];
> + dev_dbg(dev, "clock lane polarity %u, pos %u\n",
> + buscfg->lanecfg.clk.pol,
> + buscfg->lanecfg.clk.pos);
> +
> + buscfg->lanecfg.data[0].pos = vep->bus.mipi_csi2.data_lanes[0];
> + buscfg->lanecfg.data[0].pol =
> + vep->bus.mipi_csi2.lane_polarities[1];
bus.mipi_csi2 ?
> + dev_dbg(dev, "data lane polarity %u, pos %u\n",
> + buscfg->lanecfg.data[0].pol,
> + buscfg->lanecfg.data[0].pos);
> +
> + buscfg->strobe_clk_pol = vep->bus.mipi_csi1.clock_inv;
> + buscfg->phy_layer = vep->bus.mipi_csi1.strobe;
> + buscfg->ccp2_mode = vep->bus_type == V4L2_MBUS_CCP2;
> +
> + dev_dbg(dev, "clock_inv %u strobe %u ccp2 %u\n",
> + buscfg->strobe_clk_pol,
> + buscfg->phy_layer,
> + buscfg->ccp2_mode);
> + /*
> + * FIXME: now we assume the CRC is always there.
> + * Implement a way to obtain this information from the
> + * sensor. Frame descriptors, perhaps?
> + */
> + buscfg->crc = 1;
> +
> + buscfg->vp_clk_pol = 1;
> +}
> +
> +static void isp_of_parse_node_csi1(struct device *dev,
> + struct isp_bus_cfg *buscfg,
> + struct v4l2_of_endpoint *vep)
> +{
> + if (vep->base.port == ISP_OF_PHY_CSIPHY1)
> + buscfg->interface = ISP_INTERFACE_CCP2B_PHY1;
> + else
> + buscfg->interface = ISP_INTERFACE_CCP2B_PHY2;
> + __isp_of_parse_node_csi1(dev, &buscfg->bus.ccp2, vep);
> +}
> +
> +static void isp_of_parse_node_csi2(struct device *dev,
> + struct isp_bus_cfg *buscfg,
> + struct v4l2_of_endpoint *vep)
> {
> - struct isp_bus_cfg *buscfg = &isd->bus;
> - struct v4l2_of_endpoint vep;
> unsigned int i;
> - int ret;
>
> - ret = v4l2_of_parse_endpoint(node, &vep);
> - if (ret)
> - return ret;
> + if (vep->base.port == ISP_OF_PHY_CSIPHY1)
> + buscfg->interface = ISP_INTERFACE_CSI2C_PHY1;
> + else
> + buscfg->interface = ISP_INTERFACE_CSI2A_PHY2;
I would keep this code in the caller to avoid code duplication with
isp_of_parse_node_csi1().
> + buscfg->bus.csi2.lanecfg.clk.pos = vep->bus.mipi_csi2.clock_lane;
> + buscfg->bus.csi2.lanecfg.clk.pol =
> + vep->bus.mipi_csi2.lane_polarities[0];
> + dev_dbg(dev, "clock lane polarity %u, pos %u\n",
> + buscfg->bus.csi2.lanecfg.clk.pol,
> + buscfg->bus.csi2.lanecfg.clk.pos);
> +
> + for (i = 0; i < ISP_CSIPHY2_NUM_DATA_LANES; i++) {
> + buscfg->bus.csi2.lanecfg.data[i].pos =
> + vep->bus.mipi_csi2.data_lanes[i];
> + buscfg->bus.csi2.lanecfg.data[i].pol =
> + vep->bus.mipi_csi2.lane_polarities[i + 1];
> + dev_dbg(dev, "data lane %u polarity %u, pos %u\n", i,
> + buscfg->bus.csi2.lanecfg.data[i].pol,
> + buscfg->bus.csi2.lanecfg.data[i].pos);
> + }
>
> - dev_dbg(dev, "parsing endpoint %s, interface %u\n", node->full_name,
> - vep.base.port);
> + /*
> + * FIXME: now we assume the CRC is always there.
> + * Implement a way to obtain this information from the
> + * sensor. Frame descriptors, perhaps?
> + */
> + buscfg->bus.csi2.crc = 1;
> +}
>
> +static int isp_endpoint_to_buscfg(struct device *dev,
> + struct v4l2_of_endpoint vep,
> + struct isp_bus_cfg *buscfg)
> +{
> switch (vep.base.port) {
> case ISP_OF_PHY_PARALLEL:
> buscfg->interface = ISP_INTERFACE_PARALLEL;
> @@ -2059,45 +2130,42 @@ static int isp_of_parse_node(struct device *dev,
> struct device_node *node,
>
> case ISP_OF_PHY_CSIPHY1:
> case ISP_OF_PHY_CSIPHY2:
> - /* FIXME: always assume CSI-2 for now. */
> - switch (vep.base.port) {
> - case ISP_OF_PHY_CSIPHY1:
> - buscfg->interface = ISP_INTERFACE_CSI2C_PHY1;
> - break;
> - case ISP_OF_PHY_CSIPHY2:
> - buscfg->interface = ISP_INTERFACE_CSI2A_PHY2;
> - break;
> - }
> - buscfg->bus.csi2.lanecfg.clk.pos =
vep.bus.mipi_csi2.clock_lane;
> - buscfg->bus.csi2.lanecfg.clk.pol =
> - vep.bus.mipi_csi2.lane_polarities[0];
> - dev_dbg(dev, "clock lane polarity %u, pos %u\n",
> - buscfg->bus.csi2.lanecfg.clk.pol,
> - buscfg->bus.csi2.lanecfg.clk.pos);
> -
> - for (i = 0; i < ISP_CSIPHY2_NUM_DATA_LANES; i++) {
> - buscfg->bus.csi2.lanecfg.data[i].pos =
> - vep.bus.mipi_csi2.data_lanes[i];
> - buscfg->bus.csi2.lanecfg.data[i].pol =
> - vep.bus.mipi_csi2.lane_polarities[i + 1];
> - dev_dbg(dev, "data lane %u polarity %u, pos %u\n", i,
> - buscfg->bus.csi2.lanecfg.data[i].pol,
> - buscfg->bus.csi2.lanecfg.data[i].pos);
> - }
> -
> - /*
> - * FIXME: now we assume the CRC is always there.
> - * Implement a way to obtain this information from the
> - * sensor. Frame descriptors, perhaps?
> - */
> - buscfg->bus.csi2.crc = 1;
> + if (vep.bus_type == V4L2_MBUS_CSI2)
> + isp_of_parse_node_csi2(dev, buscfg, &vep);
> + else
> + isp_of_parse_node_csi1(dev, buscfg, &vep);
> break;
>
> default:
> + return -1;
Please use the appropriate error code.
> + }
> + return 0;
> +}
> +
> +static int isp_of_parse_node_endpoint(struct device *dev,
> + struct device_node *node,
> + struct isp_async_subdev *isd)
> +{
> + struct isp_bus_cfg *buscfg;
> + struct v4l2_of_endpoint vep;
> + int ret;
> +
> + isd->bus = devm_kzalloc(dev, sizeof(*isd->bus), GFP_KERNEL);
Why do you now need to allocate this manually ?
> + if (!isd->bus)
> + return -ENOMEM;
> +
> + buscfg = isd->bus;
> +
> + ret = (node, &vep);
> + if (ret)
> + return ret;
> +
> + dev_dbg(dev, "parsing endpoint %s, interface %u\n", node->full_name,
> + vep.base.port);
> +
> + if (isp_endpoint_to_buscfg(dev, vep, buscfg))
I'm fine splitting the CSI1/CSI2 parsing code to separate functions, but I
don't think there's a need to split isp_endpoint_to_buscfg(). You can keep
that part inline.
> dev_warn(dev, "%s: invalid interface %u\n", node->full_name,
> vep.base.port);
> - break;
> - }
>
> return 0;
> }
> @@ -2124,7 +2192,7 @@ static int isp_of_parse_nodes(struct device *dev,
>
> notifier->subdevs[notifier->num_subdevs] = &isd->asd;
>
> - if (isp_of_parse_node(dev, node, isd)) {
> + if (isp_of_parse_node_endpoint(dev, node, isd)) {
> of_node_put(node);
> return -EINVAL;
> }
> diff --git a/drivers/media/platform/omap3isp/isp.h
> b/drivers/media/platform/omap3isp/isp.h index 7e6f663..c0b9d1d 100644
> --- a/drivers/media/platform/omap3isp/isp.h
> +++ b/drivers/media/platform/omap3isp/isp.h
> @@ -228,7 +228,7 @@ struct isp_device {
>
> struct isp_async_subdev {
> struct v4l2_subdev *sd;
> - struct isp_bus_cfg bus;
> + struct isp_bus_cfg *bus;
> struct v4l2_async_subdev asd;
> };
>
> diff --git a/drivers/media/platform/omap3isp/ispccp2.c
> b/drivers/media/platform/omap3isp/ispccp2.c index ca09523..4edb55a 100644
> --- a/drivers/media/platform/omap3isp/ispccp2.c
> +++ b/drivers/media/platform/omap3isp/ispccp2.c
> @@ -21,6 +21,9 @@
> #include <linux/mutex.h>
> #include <linux/uaccess.h>
> #include <linux/regulator/consumer.h>
> +#include <linux/regmap.h>
> +
> +#include <media/v4l2-of.h>
>
> #include "isp.h"
> #include "ispreg.h"
> @@ -160,6 +163,33 @@ static int ccp2_if_enable(struct isp_ccp2_device *ccp2,
> u8 enable) return ret;
> }
>
> + if (isp->revision == ISP_REVISION_2_0) {
The isp_csiphy.c code checks phy->isp->phy_type for the same purpose,
shouldn't you use that too ?
> + struct media_pad *pad;
> + struct v4l2_subdev *sensor;
> + const struct isp_ccp2_cfg *buscfg;
> + u32 csirxfe;
> +
> + pad = media_entity_remote_pad(&ccp2->pads[CCP2_PAD_SINK]);
> + sensor = media_entity_to_v4l2_subdev(pad->entity);
> + /* Struct isp_bus_cfg has union inside */
> + buscfg = &((struct isp_bus_cfg *)sensor->host_priv)->bus.ccp2;
> +
> +
One blank line is enough.
> + if (enable) {
> + csirxfe = OMAP343X_CONTROL_CSIRXFE_PWRDNZ |
> + OMAP343X_CONTROL_CSIRXFE_RESET;
> +
> + if (buscfg->phy_layer)
> + csirxfe |= OMAP343X_CONTROL_CSIRXFE_SELFORM;
> +
> + if (buscfg->strobe_clk_pol)
> + csirxfe |= OMAP343X_CONTROL_CSIRXFE_CSIB_INV;
> + } else
> + csirxfe = 0;
You need curly braces for the else statement too.
> +
> + regmap_write(isp->syscon, isp->syscon_offset, csirxfe);
Isn't this already configured by csiphy_routing_cfg_3430(), called through
omap3isp_csiphy_acquire() ? You'll need to add support for the strobe/clock
polarity there, but the rest should already be handled.
> + }
> +
> /* Enable/Disable all the LCx channels */
> for (i = 0; i < CCP2_LCx_CHANS_NUM; i++)
> isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2,
ISPCCP2_LCx_CTRL(i),
> @@ -213,14 +243,17 @@ static int ccp2_phyif_config(struct isp_ccp2_device
> *ccp2, struct isp_device *isp = to_isp_device(ccp2);
> u32 val;
>
> - /* CCP2B mode */
> val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL) |
> - ISPCCP2_CTRL_IO_OUT_SEL | ISPCCP2_CTRL_MODE;
> + ISPCCP2_CTRL_MODE;
> /* Data/strobe physical layer */
> BIT_SET(val, ISPCCP2_CTRL_PHY_SEL_SHIFT, ISPCCP2_CTRL_PHY_SEL_MASK,
> buscfg->phy_layer);
> + BIT_SET(val, ISPCCP2_CTRL_IO_OUT_SEL_SHIFT,
> + ISPCCP2_CTRL_IO_OUT_SEL_MASK, buscfg->ccp2_mode);
> BIT_SET(val, ISPCCP2_CTRL_INV_SHIFT, ISPCCP2_CTRL_INV_MASK,
> buscfg->strobe_clk_pol);
> + BIT_SET(val, ISPCCP2_CTRL_VP_CLK_POL_SHIFT,
> + ISPCCP2_CTRL_VP_CLK_POL_MASK, buscfg->vp_clk_pol);
> isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
>
> val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
> @@ -339,6 +372,9 @@ static void ccp2_lcx_config(struct isp_ccp2_device
> *ccp2, isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LC01_IRQENABLE, val);
> }
>
> +void __isp_of_parse_node_csi1(struct device *dev,
> + struct isp_ccp2_cfg *buscfg,
> + struct v4l2_of_endpoint *vep);
This isn't needed.
> /*
> * ccp2_if_configure - Configure ccp2 with data from sensor
> * @ccp2: Pointer to ISP CCP2 device
> @@ -1137,6 +1173,8 @@ int omap3isp_ccp2_init(struct isp_device *isp)
> if (isp->revision == ISP_REVISION_2_0) {
> ccp2->vdds_csib = devm_regulator_get(isp->dev, "vdds_csib");
> if (IS_ERR(ccp2->vdds_csib)) {
> + if (PTR_ERR(ccp2->vdds_csib) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> dev_dbg(isp->dev,
> "Could not get regulator vdds_csib\n");
> ccp2->vdds_csib = NULL;
> diff --git a/drivers/media/platform/omap3isp/ispreg.h
> b/drivers/media/platform/omap3isp/ispreg.h index b5ea8da..d084839 100644
> --- a/drivers/media/platform/omap3isp/ispreg.h
> +++ b/drivers/media/platform/omap3isp/ispreg.h
> @@ -87,6 +87,8 @@
> #define ISPCCP2_CTRL_PHY_SEL_MASK 0x1
> #define ISPCCP2_CTRL_PHY_SEL_SHIFT 1
> #define ISPCCP2_CTRL_IO_OUT_SEL (1 << 2)
> +#define ISPCCP2_CTRL_IO_OUT_SEL_MASK 0x1
> +#define ISPCCP2_CTRL_IO_OUT_SEL_SHIFT 2
> #define ISPCCP2_CTRL_MODE (1 << 4)
> #define ISPCCP2_CTRL_VP_CLK_FORCE_ON (1 << 9)
> #define ISPCCP2_CTRL_INV (1 << 10)
> @@ -94,6 +96,8 @@
> #define ISPCCP2_CTRL_INV_SHIFT 10
> #define ISPCCP2_CTRL_VP_ONLY_EN (1 << 11)
> #define ISPCCP2_CTRL_VP_CLK_POL (1 << 12)
> +#define ISPCCP2_CTRL_VP_CLK_POL_MASK 0x1
> +#define ISPCCP2_CTRL_VP_CLK_POL_SHIFT 12
> #define ISPCCP2_CTRL_VPCLK_DIV_SHIFT 15
> #define ISPCCP2_CTRL_VPCLK_DIV_MASK 0x1ffff /* [31:15] */
> #define ISPCCP2_CTRL_VP_OUT_CTRL_SHIFT 8 /* 3430 bits */
> diff --git a/drivers/media/platform/omap3isp/omap3isp.h
> b/drivers/media/platform/omap3isp/omap3isp.h index 443e8f7..f6d1d0d 100644
> --- a/drivers/media/platform/omap3isp/omap3isp.h
> +++ b/drivers/media/platform/omap3isp/omap3isp.h
> @@ -108,6 +108,7 @@ struct isp_ccp2_cfg {
> unsigned int ccp2_mode:1;
> unsigned int phy_layer:1;
> unsigned int vpclk_div:2;
> + unsigned int vp_clk_pol:1;
> struct isp_csiphy_lanes_cfg lanecfg;
> };
>
> diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
> index 34cc99e..315c167 100644
> --- a/include/media/v4l2-mediabus.h
> +++ b/include/media/v4l2-mediabus.h
You should split the V4L2 core changes to a separate patch.
> @@ -69,11 +69,15 @@
> * @V4L2_MBUS_PARALLEL: parallel interface with hsync and vsync
> * @V4L2_MBUS_BT656: parallel interface with embedded synchronisation, can
> * also be used for BT.1120
> + * @V4L2_MBUS_CSI1: MIPI CSI-1 serial interface
> + * @V4L2_MBUS_CCP2: CCP2 (Compact Camera Port 2)
It would help if you could provide, in comments or in the commit message, a
few pointers to information about CSI-1 and CCP2.
> * @V4L2_MBUS_CSI2: MIPI CSI-2 serial interface
> */
> enum v4l2_mbus_type {
> V4L2_MBUS_PARALLEL,
> V4L2_MBUS_BT656,
> + V4L2_MBUS_CSI1,
> + V4L2_MBUS_CCP2,
That's nice, but v4l2_of_parse_endpoint() never sets the bus type to CSI1 or
CCP2. You need to fix that (and update the related DT bindings).
> V4L2_MBUS_CSI2,
> };
>
> diff --git a/include/media/v4l2-of.h b/include/media/v4l2-of.h
> index 4dc34b2..63a52ee 100644
> --- a/include/media/v4l2-of.h
> +++ b/include/media/v4l2-of.h
> @@ -53,6 +53,22 @@ struct v4l2_of_bus_parallel {
> };
>
> /**
> + * struct v4l2_of_bus_csi1 - CSI-1/CCP2 data bus structure
> + * @clock_inv: polarity of clock/strobe signal
> + * false - not inverted, true - inverted
> + * @strobe: false - data/clock, true - data/strobe
> + * @data_lane: the number of the data lane
> + * @clock_lane: the number of the clock lane
> + */
> +struct v4l2_of_bus_mipi_csi1 {
> + bool clock_inv;
> + bool strobe;
> + bool lane_polarity[2];
This field isn't documented.
> + unsigned char data_lane;
> + unsigned char clock_lane;
> +};
> +
> +/**
> * struct v4l2_of_endpoint - the endpoint data structure
> * @base: struct of_endpoint containing port, id, and local of_node
> * @bus_type: bus type
> @@ -66,6 +82,7 @@ struct v4l2_of_endpoint {
> enum v4l2_mbus_type bus_type;
> union {
> struct v4l2_of_bus_parallel parallel;
> + struct v4l2_of_bus_mipi_csi1 mipi_csi1;
> struct v4l2_of_bus_mipi_csi2 mipi_csi2;
> } bus;
> u64 *link_frequencies;
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
