Hello Marek,
On 02/14/2017 04:52 AM, Marek Szyprowski wrote:
> Move code for DMA memory configuration with IOMMU into separate function
> to make it easier to compare what is being done in each case.
>
> Signed-off-by: Marek Szyprowski <m.szyprow...@samsung.com>
> ---
> drivers/media/platform/s5p-mfc/s5p_mfc.c | 102
> ++++++++++++++++++-------------
> 1 file changed, 61 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c
> b/drivers/media/platform/s5p-mfc/s5p_mfc.c
> index 92a88c20b26d..a18740c81c55 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
> @@ -1107,41 +1107,13 @@ static struct device *s5p_mfc_alloc_memdev(struct
> device *dev,
> return NULL;
> }
>
> -static int s5p_mfc_configure_dma_memory(struct s5p_mfc_dev *mfc_dev)
> +static int s5p_mfc_configure_2port_memory(struct s5p_mfc_dev *mfc_dev)
> {
> struct device *dev = &mfc_dev->plat_dev->dev;
> void *bank2_virt;
> dma_addr_t bank2_dma_addr;
> unsigned long align_size = 1 << MFC_BASE_ALIGN_ORDER;
> - struct s5p_mfc_priv_buf *fw_buf = &mfc_dev->fw_buf;
> -
> - /*
> - * When IOMMU is available, we cannot use the default configuration,
> - * because of MFC firmware requirements: address space limited to
> - * 256M and non-zero default start address.
> - * This is still simplified, not optimal configuration, but for now
> - * IOMMU core doesn't allow to configure device's IOMMUs channel
> - * separately.
> - */
> - if (exynos_is_iommu_available(dev)) {
> - int ret = exynos_configure_iommu(dev, S5P_MFC_IOMMU_DMA_BASE,
> - S5P_MFC_IOMMU_DMA_SIZE);
> - if (ret)
> - return ret;
> -
> - mfc_dev->mem_dev[BANK1_CTX] = mfc_dev->mem_dev[BANK2_CTX] = dev;
> - ret = s5p_mfc_alloc_firmware(mfc_dev);
> - if (ret) {
> - exynos_unconfigure_iommu(dev);
> - return ret;
> - }
> -
> - mfc_dev->dma_base[BANK1_CTX] = mfc_dev->fw_buf.dma;
> - mfc_dev->dma_base[BANK2_CTX] = mfc_dev->fw_buf.dma;
> - vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
> -
> - return 0;
> - }
> + int ret;
This should be declared in patch 8/15.
>
> /*
> * Create and initialize virtual devices for accessing
> @@ -1188,26 +1160,74 @@ static int s5p_mfc_configure_dma_memory(struct
> s5p_mfc_dev *mfc_dev)
> DMA_BIT_MASK(32));
> vb2_dma_contig_set_max_seg_size(mfc_dev->mem_dev[BANK2_CTX],
> DMA_BIT_MASK(32));
> -
This seems to be an unrelated change.
The rest looks good to me.
Reviewed-by: Javier Martinez Canillas <jav...@osg.samsung.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
