On Mon, 2017-03-20 at 15:43 +0000, Russell King - ARM Linux wrote: > On Mon, Mar 20, 2017 at 02:20:16PM +0100, Philipp Zabel wrote: > > To set and read colorimetry information: > > https://patchwork.linuxtv.org/patch/39350/ > > Thanks, I've applied all four of your patches, but there's a side effect > from that. Old media-ctl (modified by me): > > - entity 53: imx219 0-0010 (2 pads, 2 links) > type V4L2 subdev subtype Unknown flags 0 > device node name /dev/v4l-subdev9 > pad0: Source > [fmt:SRGGB8/816x616 field:none > frame_interval:1/25] > -> "imx6-mipi-csi2":0 [ENABLED] > pad1: Sink > [fmt:SRGGB10/3280x2464 field:none > crop.bounds:(0,0)/3280x2464 > crop:(0,0)/3264x2464 > compose.bounds:(0,0)/3264x2464 > compose:(0,0)/816x616] > <- "imx219 pixel 0-0010":0 [ENABLED,IMMUTABLE] > > New media-ctl: > > - entity 53: imx219 0-0010 (2 pads, 2 links) > type V4L2 subdev subtype Unknown flags 0 > device node name /dev/v4l-subdev9 > pad0: Source > [fmt:SRGGB8_1X8/816x616@1/25 field:none colorspace:srgb > xfer:srgb] > -> "imx6-mipi-csi2":0 [ENABLED] > pad1: Sink > <- "imx219 pixel 0-0010":0 [ENABLED,IMMUTABLE] > > It looks like we successfully retrieve the frame interval for pad 0 > and print it, but when we try to retrieve the frame interval for pad 1, > we get EINVAL (because that's what I'm returning, but I'm wondering if > that's the correct thing to do...) and that prevents _all_ format > information being output.
According to the documentation [1], you are doing the right thing: The struct v4l2_subdev_frame_interval pad references a non-existing pad, or the pad doesn’t support frame intervals. But v4l2_subdev_call returns -ENOIOCTLCMD if the g_frame_interval op is not implemented at all, which is turned into -ENOTTY by video_usercopy. [1] https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/vidioc-subdev-g-frame-interval.html#return-value > Maybe something like the following would be a better idea? > > utils/media-ctl/media-ctl.c | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/utils/media-ctl/media-ctl.c b/utils/media-ctl/media-ctl.c > index f61963a..a50a559 100644 > --- a/utils/media-ctl/media-ctl.c > +++ b/utils/media-ctl/media-ctl.c > @@ -81,22 +81,22 @@ static void v4l2_subdev_print_format(struct media_entity > *entity, > struct v4l2_mbus_framefmt format; > struct v4l2_fract interval = { 0, 0 }; > struct v4l2_rect rect; > - int ret; > + int ret, err_fi; > > ret = v4l2_subdev_get_format(entity, &format, pad, which); > if (ret != 0) > return; > > - ret = v4l2_subdev_get_frame_interval(entity, &interval, pad); > - if (ret != 0 && ret != -ENOTTY) > - return; > + err_fi = v4l2_subdev_get_frame_interval(entity, &interval, pad); Not supporting frame intervals doesn't warrant a visible error message, I think -EINVAL should also be ignored above, if the spec is to be believed. > > printf("\t\t[fmt:%s/%ux%u", > v4l2_subdev_pixelcode_to_string(format.code), > format.width, format.height); > > - if (interval.numerator || interval.denominator) > + if (err_fi == 0 && (interval.numerator || interval.denominator)) > printf("@%u/%u", interval.numerator, interval.denominator); > + else if (err_fi != -ENOTTY) > + printf("@<error: %s>", strerror(-err_fi)); Or here. > > if (format.field) > printf(" field:%s", v4l2_subdev_field_to_string(format.field)); > > regards Philipp