Hi Neil,

Thank you for the patch.

On Monday 03 Apr 2017 16:42:38 Neil Armstrong wrote:
> The HDMI TX controller support HPD and RXSENSE signaling from the PHY
> via it's STAT0 PHY interface, but some vendor PHYs can manage these
> signals independently from the controller, thus these STAT0 handling
> should be moved to PHY specific operations and become optional.
> 
> The existing STAT0 HPD and RXSENSE handling code is refactored into
> a supplementaty set of default PHY operations that are used automatically
> when the platform glue doesn't provide its own operations.
> 
> Reviewed-by: Jose Abreu <joab...@synopsys.com>
> Reviewed-by: Archit Taneja <arch...@codeaurora.org>
> Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>

Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>

> ---
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 135 +++++++++++++++------------
>  include/drm/bridge/dw_hdmi.h              |   5 ++
>  2 files changed, 86 insertions(+), 54 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index 16d5fff3..84cc949 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -1229,10 +1229,46 @@ static enum drm_connector_status
> dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi, connector_status_connected :
> connector_status_disconnected;
>  }
> 
> +static void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
> +                                bool force, bool disabled, bool rxsense)
> +{
> +     u8 old_mask = hdmi->phy_mask;
> +
> +     if (force || disabled || !rxsense)
> +             hdmi->phy_mask |= HDMI_PHY_RX_SENSE;
> +     else
> +             hdmi->phy_mask &= ~HDMI_PHY_RX_SENSE;
> +
> +     if (old_mask != hdmi->phy_mask)
> +             hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
> +}
> +
> +static void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
> +{
> +     /*
> +      * Configure the PHY RX SENSE and HPD interrupts polarities and clear
> +      * any pending interrupt.
> +      */
> +     hdmi_writeb(hdmi, HDMI_PHY_HPD | HDMI_PHY_RX_SENSE, HDMI_PHY_POL0);
> +     hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
> +                 HDMI_IH_PHY_STAT0);
> +
> +     /* Enable cable hot plug irq. */
> +     hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
> +
> +     /* Clear and unmute interrupts. */
> +     hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
> +                 HDMI_IH_PHY_STAT0);
> +     hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | 
HDMI_IH_PHY_STAT0_RX_SENSE),
> +                 HDMI_IH_MUTE_PHY_STAT0);
> +}
> +
>  static const struct dw_hdmi_phy_ops dw_hdmi_synopsys_phy_ops = {
>       .init = dw_hdmi_phy_init,
>       .disable = dw_hdmi_phy_disable,
>       .read_hpd = dw_hdmi_phy_read_hpd,
> +     .update_hpd = dw_hdmi_phy_update_hpd,
> +     .setup_hpd = dw_hdmi_phy_setup_hpd,
>  };
> 
>  /* ------------------------------------------------------------------------
> @@ -1808,35 +1844,10 @@ static void dw_hdmi_update_power(struct dw_hdmi
> *hdmi) */
>  static void dw_hdmi_update_phy_mask(struct dw_hdmi *hdmi)
>  {
> -     u8 old_mask = hdmi->phy_mask;
> -
> -     if (hdmi->force || hdmi->disabled || !hdmi->rxsense)
> -             hdmi->phy_mask |= HDMI_PHY_RX_SENSE;
> -     else
> -             hdmi->phy_mask &= ~HDMI_PHY_RX_SENSE;
> -
> -     if (old_mask != hdmi->phy_mask)
> -             hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
> -}
> -
> -static void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi)
> -{
> -     /*
> -      * Configure the PHY RX SENSE and HPD interrupts polarities and clear
> -      * any pending interrupt.
> -      */
> -     hdmi_writeb(hdmi, HDMI_PHY_HPD | HDMI_PHY_RX_SENSE, HDMI_PHY_POL0);
> -     hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
> -                 HDMI_IH_PHY_STAT0);
> -
> -     /* Enable cable hot plug irq. */
> -     hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
> -
> -     /* Clear and unmute interrupts. */
> -     hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
> -                 HDMI_IH_PHY_STAT0);
> -     hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | 
HDMI_IH_PHY_STAT0_RX_SENSE),
> -                 HDMI_IH_MUTE_PHY_STAT0);
> +     if (hdmi->phy.ops->update_hpd)
> +             hdmi->phy.ops->update_hpd(hdmi, hdmi->phy.data,
> +                                       hdmi->force, hdmi->disabled,
> +                                       hdmi->rxsense);
>  }
> 
>  static enum drm_connector_status
> @@ -2028,6 +2039,41 @@ static irqreturn_t dw_hdmi_hardirq(int irq, void
> *dev_id) return ret;
>  }
> 
> +void __dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool
> rx_sense) +{
> +     mutex_lock(&hdmi->mutex);
> +
> +     if (!hdmi->force) {
> +             /*
> +              * If the RX sense status indicates we're disconnected,
> +              * clear the software rxsense status.
> +              */
> +             if (!rx_sense)
> +                     hdmi->rxsense = false;
> +
> +             /*
> +              * Only set the software rxsense status when both
> +              * rxsense and hpd indicates we're connected.
> +              * This avoids what seems to be bad behaviour in
> +              * at least iMX6S versions of the phy.
> +              */
> +             if (hpd)
> +                     hdmi->rxsense = true;
> +
> +             dw_hdmi_update_power(hdmi);
> +             dw_hdmi_update_phy_mask(hdmi);
> +     }
> +     mutex_unlock(&hdmi->mutex);
> +}
> +
> +void dw_hdmi_setup_rx_sense(struct device *dev, bool hpd, bool rx_sense)
> +{
> +     struct dw_hdmi *hdmi = dev_get_drvdata(dev);
> +
> +     __dw_hdmi_setup_rx_sense(hdmi, hpd, rx_sense);
> +}
> +EXPORT_SYMBOL_GPL(dw_hdmi_setup_rx_sense);
> +
>  static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
>  {
>       struct dw_hdmi *hdmi = dev_id;
> @@ -2060,30 +2106,10 @@ static irqreturn_t dw_hdmi_irq(int irq, void
> *dev_id) * ask the source to re-read the EDID.
>        */
>       if (intr_stat &
> -         (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD)) {
> -             mutex_lock(&hdmi->mutex);
> -             if (!hdmi->force) {
> -                     /*
> -                      * If the RX sense status indicates we're 
disconnected,
> -                      * clear the software rxsense status.
> -                      */
> -                     if (!(phy_stat & HDMI_PHY_RX_SENSE))
> -                             hdmi->rxsense = false;
> -
> -                     /*
> -                      * Only set the software rxsense status when both
> -                      * rxsense and hpd indicates we're connected.
> -                      * This avoids what seems to be bad behaviour in
> -                      * at least iMX6S versions of the phy.
> -                      */
> -                     if (phy_stat & HDMI_PHY_HPD)
> -                             hdmi->rxsense = true;
> -
> -                     dw_hdmi_update_power(hdmi);
> -                     dw_hdmi_update_phy_mask(hdmi);
> -             }
> -             mutex_unlock(&hdmi->mutex);
> -     }
> +         (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD))
> +             __dw_hdmi_setup_rx_sense(hdmi,
> +                                      phy_stat & HDMI_PHY_HPD,
> +                                      phy_stat & HDMI_PHY_RX_SENSE);
> 
>       if (intr_stat & HDMI_IH_PHY_STAT0_HPD) {
>               dev_dbg(hdmi->dev, "EVENT=%s\n",
> @@ -2357,7 +2383,8 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
>  #endif
> 
>       dw_hdmi_setup_i2c(hdmi);
> -     dw_hdmi_phy_setup_hpd(hdmi);
> +     if (hdmi->phy.ops->setup_hpd)
> +             hdmi->phy.ops->setup_hpd(hdmi, hdmi->phy.data);
> 
>       memset(&pdevinfo, 0, sizeof(pdevinfo));
>       pdevinfo.parent = dev;
> diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
> index 45c2c15..e63d675 100644
> --- a/include/drm/bridge/dw_hdmi.h
> +++ b/include/drm/bridge/dw_hdmi.h
> @@ -117,6 +117,9 @@ struct dw_hdmi_phy_ops {
>                   struct drm_display_mode *mode);
>       void (*disable)(struct dw_hdmi *hdmi, void *data);
>       enum drm_connector_status (*read_hpd)(struct dw_hdmi *hdmi, void 
*data);
> +     void (*update_hpd)(struct dw_hdmi *hdmi, void *data,
> +                        bool force, bool disabled, bool rxsense);
> +     void (*setup_hpd)(struct dw_hdmi *hdmi, void *data);
>  };
> 
>  struct dw_hdmi_plat_data {
> @@ -147,6 +150,8 @@ int dw_hdmi_probe(struct platform_device *pdev,
>  int dw_hdmi_bind(struct platform_device *pdev, struct drm_encoder *encoder,
> const struct dw_hdmi_plat_data *plat_data);
> 
> +void dw_hdmi_setup_rx_sense(struct device *dev, bool hpd, bool rx_sense);
> +
>  void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate);
>  void dw_hdmi_audio_enable(struct dw_hdmi *hdmi);
>  void dw_hdmi_audio_disable(struct dw_hdmi *hdmi);

-- 
Regards,

Laurent Pinchart

Reply via email to