Am 01.05.2017 um 13:38 schrieb Mauro Carvalho Chehab: > Right now, all devices use bus 0 for eeprom. However, newer > versions of Terratec H6 use a different buffer for eeprom. > > So, add support to use a different I2C address for eeprom.
Has this been tested ? Did you read my reply to the previous patch version ?: See http://www.spinics.net/lists/linux-media/msg114860.html I doubt it will work. At least not for the device from the thread in the Kodi-forum. Regards, Frank > Signed-off-by: Mauro Carvalho Chehab <mche...@s-opensource.com> > --- > drivers/media/usb/em28xx/em28xx-cards.c | 1 + > drivers/media/usb/em28xx/em28xx-i2c.c | 5 +---- > drivers/media/usb/em28xx/em28xx.h | 4 +++- > 3 files changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/media/usb/em28xx/em28xx-cards.c > b/drivers/media/usb/em28xx/em28xx-cards.c > index a12b599a1fa2..c7754303e88e 100644 > --- a/drivers/media/usb/em28xx/em28xx-cards.c > +++ b/drivers/media/usb/em28xx/em28xx-cards.c > @@ -2669,6 +2669,7 @@ static inline void em28xx_set_model(struct em28xx *dev) > > /* Should be initialized early, for I2C to work */ > dev->def_i2c_bus = dev->board.def_i2c_bus; > + dev->eeprom_i2c_bus = dev->board.eeprom_i2c_bus; > } > > /* Wait until AC97_RESET reports the expected value reliably before > proceeding. > diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c > b/drivers/media/usb/em28xx/em28xx-i2c.c > index 8c472d5adb50..df0ab4b6f18f 100644 > --- a/drivers/media/usb/em28xx/em28xx-i2c.c > +++ b/drivers/media/usb/em28xx/em28xx-i2c.c > @@ -665,8 +665,6 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned > bus, > *eedata = NULL; > *eedata_len = 0; > > - /* EEPROM is always on i2c bus 0 on all known devices. */ > - > dev->i2c_client[bus].addr = 0xa0 >> 1; > > /* Check if board has eeprom */ > @@ -975,8 +973,7 @@ int em28xx_i2c_register(struct em28xx *dev, unsigned bus, > dev->i2c_client[bus] = em28xx_client_template; > dev->i2c_client[bus].adapter = &dev->i2c_adap[bus]; > > - /* Up to now, all eeproms are at bus 0 */ > - if (!bus) { > + if (bus == dev->eeprom_i2c_bus) { > retval = em28xx_i2c_eeprom(dev, bus, &dev->eedata, > &dev->eedata_len); > if ((retval < 0) && (retval != -ENODEV)) { > dev_err(&dev->intf->dev, > diff --git a/drivers/media/usb/em28xx/em28xx.h > b/drivers/media/usb/em28xx/em28xx.h > index e8d97d5ec161..8117536343ab 100644 > --- a/drivers/media/usb/em28xx/em28xx.h > +++ b/drivers/media/usb/em28xx/em28xx.h > @@ -440,7 +440,8 @@ struct em28xx_board { > int vchannels; > int tuner_type; > int tuner_addr; > - unsigned def_i2c_bus; /* Default I2C bus */ > + unsigned def_i2c_bus; /* Default I2C bus */ > + unsigned eeprom_i2c_bus; /* EEPROM I2C bus */ > > /* i2c flags */ > unsigned int tda9887_conf; > @@ -643,6 +644,7 @@ struct em28xx { > > unsigned char eeprom_addrwidth_16bit:1; > unsigned def_i2c_bus; /* Default I2C bus */ > + unsigned eeprom_i2c_bus;/* EEPROM I2C bus */ > unsigned cur_i2c_bus; /* Current I2C bus */ > struct rt_mutex i2c_bus_lock; >
