From: Hans Verkuil <hans.verk...@cisco.com>
Unfortunately the use of 'type' was inconsistent for multiplanar
buffer types. Starting with 4.12 both the normal and _MPLANE variants
are allowed, thus making it possible to write sensible code.
Yes, we messed up :-(
Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
---
Documentation/media/uapi/v4l/vidioc-cropcap.rst | 21 ++++++++++++---------
Documentation/media/uapi/v4l/vidioc-g-crop.rst | 22 +++++++++++++---------
.../media/uapi/v4l/vidioc-g-selection.rst | 22 ++++++++++++----------
3 files changed, 37 insertions(+), 28 deletions(-)
diff --git a/Documentation/media/uapi/v4l/vidioc-cropcap.rst
b/Documentation/media/uapi/v4l/vidioc-cropcap.rst
index f21a69b554e1..d354216846e6 100644
--- a/Documentation/media/uapi/v4l/vidioc-cropcap.rst
+++ b/Documentation/media/uapi/v4l/vidioc-cropcap.rst
@@ -39,16 +39,19 @@ structure. Drivers fill the rest of the structure. The
results are
constant except when switching the video standard. Remember this switch
can occur implicit when switching the video input or output.
-Do not use the multiplanar buffer types. Use
-``V4L2_BUF_TYPE_VIDEO_CAPTURE`` instead of
-``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE`` and use
-``V4L2_BUF_TYPE_VIDEO_OUTPUT`` instead of
-``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``.
-
This ioctl must be implemented for video capture or output devices that
support cropping and/or scaling and/or have non-square pixels, and for
overlay devices.
+.. note::
+ Unfortunately in the case of multiplanar buffer types
+ (``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE`` and
``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``)
+ this API was messed up with regards to how the :c:type:`v4l2_cropcap`
``type`` field
+ should be filled in. The Samsung Exynos drivers only accepted the
+ ``_MPLANE`` buffer type while other drivers only accepted a non-multiplanar
+ buffer type (i.e. without the ``_MPLANE`` at the end).
+
+ Starting with kernel 4.12 both variations are allowed.
.. c:type:: v4l2_cropcap
@@ -62,9 +65,9 @@ overlay devices.
* - __u32
- ``type``
- Type of the data stream, set by the application. Only these types
- are valid here: ``V4L2_BUF_TYPE_VIDEO_CAPTURE``,
- ``V4L2_BUF_TYPE_VIDEO_OUTPUT`` and
- ``V4L2_BUF_TYPE_VIDEO_OVERLAY``. See :c:type:`v4l2_buf_type`.
+ are valid here: ``V4L2_BUF_TYPE_VIDEO_CAPTURE``,
``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``,
+ ``V4L2_BUF_TYPE_VIDEO_OUTPUT``, ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``
and
+ ``V4L2_BUF_TYPE_VIDEO_OVERLAY``. See :c:type:`v4l2_buf_type` and the
note above.
* - struct :ref:`v4l2_rect <v4l2-rect-crop>`
- ``bounds``
- Defines the window within capturing or output is possible, this
diff --git a/Documentation/media/uapi/v4l/vidioc-g-crop.rst
b/Documentation/media/uapi/v4l/vidioc-g-crop.rst
index 56a36340f565..8aabe33c8da7 100644
--- a/Documentation/media/uapi/v4l/vidioc-g-crop.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-crop.rst
@@ -45,12 +45,6 @@ and struct :c:type:`v4l2_rect` substructure named ``c`` of a
v4l2_crop structure and call the :ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>` ioctl
with a pointer
to this structure.
-Do not use the multiplanar buffer types. Use
-``V4L2_BUF_TYPE_VIDEO_CAPTURE`` instead of
-``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE`` and use
-``V4L2_BUF_TYPE_VIDEO_OUTPUT`` instead of
-``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``.
-
The driver first adjusts the requested dimensions against hardware
limits, i. e. the bounds given by the capture/output window, and it
rounds to the closest possible values of horizontal and vertical offset,
@@ -74,6 +68,16 @@ been negotiated.
When cropping is not supported then no parameters are changed and
:ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>` returns the ``EINVAL`` error code.
+.. note::
+ Unfortunately in the case of multiplanar buffer types
+ (``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE`` and
``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``)
+ this API was messed up with regards to how the :c:type:`v4l2_crop` ``type``
field
+ should be filled in. The Samsung Exynos drivers only accepted the
+ ``_MPLANE`` buffer type while other drivers only accepted a non-multiplanar
+ buffer type (i.e. without the ``_MPLANE`` at the end).
+
+ Starting with kernel 4.12 both variations are allowed.
+
.. c:type:: v4l2_crop
@@ -87,9 +91,9 @@ When cropping is not supported then no parameters are changed
and
* - __u32
- ``type``
- Type of the data stream, set by the application. Only these types
- are valid here: ``V4L2_BUF_TYPE_VIDEO_CAPTURE``,
- ``V4L2_BUF_TYPE_VIDEO_OUTPUT`` and
- ``V4L2_BUF_TYPE_VIDEO_OVERLAY``. See :c:type:`v4l2_buf_type`.
+ are valid here: ``V4L2_BUF_TYPE_VIDEO_CAPTURE``,
``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``,
+ ``V4L2_BUF_TYPE_VIDEO_OUTPUT``, ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``
and
+ ``V4L2_BUF_TYPE_VIDEO_OVERLAY``. See :c:type:`v4l2_buf_type` and the
note above.
* - struct :c:type:`v4l2_rect`
- ``c``
- Cropping rectangle. The same co-ordinate system as for struct
diff --git a/Documentation/media/uapi/v4l/vidioc-g-selection.rst
b/Documentation/media/uapi/v4l/vidioc-g-selection.rst
index deb1f6fb473b..8d4e7bf49eab 100644
--- a/Documentation/media/uapi/v4l/vidioc-g-selection.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-selection.rst
@@ -40,13 +40,19 @@ Description
The ioctls are used to query and configure selection rectangles.
+.. note::
+ Unfortunately in the case of multiplanar buffer types
+ (``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE`` and
``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``)
+ this API was messed up with regards to how the :c:type:`v4l2_selection`
``type`` field
+ should be filled in. The Samsung Exynos drivers only accepted the
+ ``_MPLANE`` buffer type while other drivers only accepted a non-multiplanar
+ buffer type (i.e. without the ``_MPLANE`` at the end).
+
+ Starting with kernel 4.12 both variations are allowed.
+
To query the cropping (composing) rectangle set struct
:c:type:`v4l2_selection` ``type`` field to the
-respective buffer type. Do not use the multiplanar buffer types. Use
-``V4L2_BUF_TYPE_VIDEO_CAPTURE`` instead of
-``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE`` and use
-``V4L2_BUF_TYPE_VIDEO_OUTPUT`` instead of
-``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``. The next step is setting the
+respective buffer type. The next step is setting the
value of struct :c:type:`v4l2_selection` ``target``
field to ``V4L2_SEL_TGT_CROP`` (``V4L2_SEL_TGT_COMPOSE``). Please refer
to table :ref:`v4l2-selections-common` or :ref:`selection-api` for
@@ -64,11 +70,7 @@ pixels.
To change the cropping (composing) rectangle set the struct
:c:type:`v4l2_selection` ``type`` field to the
-respective buffer type. Do not use multiplanar buffers. Use
-``V4L2_BUF_TYPE_VIDEO_CAPTURE`` instead of
-``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``. Use
-``V4L2_BUF_TYPE_VIDEO_OUTPUT`` instead of
-``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``. The next step is setting the
+respective buffer type. The next step is setting the
value of struct :c:type:`v4l2_selection` ``target`` to
``V4L2_SEL_TGT_CROP`` (``V4L2_SEL_TGT_COMPOSE``). Please refer to table
:ref:`v4l2-selections-common` or :ref:`selection-api` for additional
--
2.11.0
