On 05/19/2017 03:07 PM, Ulrich Hecht wrote:
Hi!
This is a by-the-datasheet implementation of analog and digital video input
on the Gose board.
This revision adds new bindings that distinguish between ADV7180 variants
with three and six input ports. There are numerous variants of this chip,
but since all that have "CP" in their names have three inputs, and all that
have "ST" have six, I have limited myself to two new compatible strings,
"adv7180cp" and "adv7180st".
The digital input patch has received minor tweaks of the port names for
consistency, and the Gose analog input patch has been modified to use the
new bindings, and a composite video connector has been added.
Looks good. I assume the dts changes go through
linux-renesas-...@vger.kernel.org?
I'll pick up the adv7180 changes.
Regards,
Hans
CU
Uli
Changes since v2:
- hdmi: port hdmi_con renamed to hdmi_con_out
- adv7180: added new compatibility strings and bindings
- composite: added connector, use new bindings
Changes since v1:
- r8a7793.dtsi: added VIN2
- modeled HDMI decoder input/output and connector
- added "renesas,rcar-gen2-vin" compat strings
- removed unnecessary "remote" node and aliases
- set ADV7612 interrupt to GP4_2
Ulrich Hecht (4):
ARM: dts: gose: add HDMI input
media: adv7180: add adv7180cp, adv7180st compatible strings
media: adv7180: Add adv7180cp, adv7180st bindings
ARM: dts: gose: add composite video input
.../devicetree/bindings/media/i2c/adv7180.txt | 15 +++
arch/arm/boot/dts/r8a7793-gose.dts | 127 ++++++++++++++++++++-
drivers/media/i2c/adv7180.c | 2 +
3 files changed, 142 insertions(+), 2 deletions(-)