On 05/24/2017 02:13 AM, Niklas Söderlund wrote:
From: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
A V4L2 driver for Renesas R-Car MIPI CSI-2 receiver. The driver
supports the rcar-vin driver on R-Car Gen3 SoCs where separate CSI-2
hardware blocks are connected between the video sources and the video
grabbers (VIN).
Driver is based on a prototype by Koji Matsuoka in the Renesas BSP.
Signed-off-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
---
drivers/media/platform/rcar-vin/Kconfig | 12 +
drivers/media/platform/rcar-vin/Makefile | 1 +
drivers/media/platform/rcar-vin/rcar-csi2.c | 867 ++++++++++++++++++++++++++++
3 files changed, 880 insertions(+)
create mode 100644 drivers/media/platform/rcar-vin/rcar-csi2.c
diff --git a/drivers/media/platform/rcar-vin/Kconfig
b/drivers/media/platform/rcar-vin/Kconfig
index af4c98b44d2e22cb..6875f30c1ae42631 100644
--- a/drivers/media/platform/rcar-vin/Kconfig
+++ b/drivers/media/platform/rcar-vin/Kconfig
@@ -1,3 +1,15 @@
+config VIDEO_RCAR_CSI2
+ tristate "R-Car MIPI CSI-2 Receiver"
+ depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && OF
+ depends on ARCH_RENESAS || COMPILE_TEST
+ select V4L2_FWNODE
+ ---help---
+ Support for Renesas R-Car MIPI CSI-2 receiver.
+ Supports R-Car Gen3 SoCs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rcar-csi2.
+
config VIDEO_RCAR_VIN
tristate "R-Car Video Input (VIN) Driver"
depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && OF && HAS_DMA &&
MEDIA_CONTROLLER
diff --git a/drivers/media/platform/rcar-vin/Makefile
b/drivers/media/platform/rcar-vin/Makefile
index 48c5632c21dc060b..5ab803d3e7c1aa57 100644
--- a/drivers/media/platform/rcar-vin/Makefile
+++ b/drivers/media/platform/rcar-vin/Makefile
@@ -1,3 +1,4 @@
rcar-vin-objs = rcar-core.o rcar-dma.o rcar-v4l2.o
+obj-$(CONFIG_VIDEO_RCAR_CSI2) += rcar-csi2.o
obj-$(CONFIG_VIDEO_RCAR_VIN) += rcar-vin.o
diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c
b/drivers/media/platform/rcar-vin/rcar-csi2.c
new file mode 100644
index 0000000000000000..1175f1fe4b139a13
--- /dev/null
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -0,0 +1,867 @@
+/*
+ * Driver for Renesas R-Car MIPI CSI-2 Receiver
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-mc.h>
+#include <media/v4l2-subdev.h>
+
+/* Register offsets and bits */
+
+/* Control Timing Select */
+#define TREF_REG 0x00
+#define TREF_TREF (1 << 0)
+
+/* Software Reset */
+#define SRST_REG 0x04
+#define SRST_SRST (1 << 0)
+
+/* PHY Operation Control */
+#define PHYCNT_REG 0x08
+#define PHYCNT_SHUTDOWNZ (1 << 17)
+#define PHYCNT_RSTZ (1 << 16)
+#define PHYCNT_ENABLECLK (1 << 4)
+#define PHYCNT_ENABLE_3 (1 << 3)
+#define PHYCNT_ENABLE_2 (1 << 2)
+#define PHYCNT_ENABLE_1 (1 << 1)
+#define PHYCNT_ENABLE_0 (1 << 0)
+
+/* Checksum Control */
+#define CHKSUM_REG 0x0c
+#define CHKSUM_ECC_EN (1 << 1)
+#define CHKSUM_CRC_EN (1 << 0)
+
+/*
+ * Channel Data Type Select
+ * VCDT[0-15]: Channel 1 VCDT[16-31]: Channel 2
+ * VCDT2[0-15]: Channel 3 VCDT2[16-31]: Channel 4
+ */
+#define VCDT_REG 0x10
+#define VCDT2_REG 0x14
+#define VCDT_VCDTN_EN (1 << 15)
+#define VCDT_SEL_VC(n) (((n) & 0x3) << 8)
+#define VCDT_SEL_DTN_ON (1 << 6)
+#define VCDT_SEL_DT(n) (((n) & 0x3f) << 0)
+
+/* Frame Data Type Select */
+#define FRDT_REG 0x18
+
+/* Field Detection Control */
+#define FLD_REG 0x1c
+#define FLD_FLD_NUM(n) (((n) & 0xff) << 16)
+#define FLD_FLD_EN4 (1 << 3)
+#define FLD_FLD_EN3 (1 << 2)
+#define FLD_FLD_EN2 (1 << 1)
+#define FLD_FLD_EN (1 << 0)
+
+/* Automatic Standby Control */
+#define ASTBY_REG 0x20
+
+/* Long Data Type Setting 0 */
+#define LNGDT0_REG 0x28
+
+/* Long Data Type Setting 1 */
+#define LNGDT1_REG 0x2c
+
+/* Interrupt Enable */
+#define INTEN_REG 0x30
+
+/* Interrupt Source Mask */
+#define INTCLOSE_REG 0x34
+
+/* Interrupt Status Monitor */
+#define INTSTATE_REG 0x38
+
+/* Interrupt Error Status Monitor */
+#define INTERRSTATE_REG 0x3c
+
+/* Short Packet Data */
+#define SHPDAT_REG 0x40
+
+/* Short Packet Count */
+#define SHPCNT_REG 0x44
+
+/* LINK Operation Control */
+#define LINKCNT_REG 0x48
+#define LINKCNT_MONITOR_EN (1 << 31)
+#define LINKCNT_REG_MONI_PACT_EN (1 << 25)
+#define LINKCNT_ICLK_NONSTOP (1 << 24)
+
+/* Lane Swap */
+#define LSWAP_REG 0x4c
+#define LSWAP_L3SEL(n) (((n) & 0x3) << 6)
+#define LSWAP_L2SEL(n) (((n) & 0x3) << 4)
+#define LSWAP_L1SEL(n) (((n) & 0x3) << 2)
+#define LSWAP_L0SEL(n) (((n) & 0x3) << 0)
+
+/* PHY Test Interface Clear */
+#define PHTC_REG 0x58
+#define PHTC_TESTCLR (1 << 0)
+
+/* PHY Frequency Control */
+#define PHYPLL_REG 0x68
+#define PHYPLL_HSFREQRANGE(n) ((n) << 16)
+
+struct phypll_hsfreqrange {
+ unsigned int mbps;
+ unsigned char reg;
+};
+
+static const struct phypll_hsfreqrange phypll_hsfreqrange_map[] = {
+ { .mbps = 80, .reg = 0x00 },
+ { .mbps = 90, .reg = 0x10 },
+ { .mbps = 100, .reg = 0x20 },
+ { .mbps = 110, .reg = 0x30 },
+ { .mbps = 120, .reg = 0x01 },
+ { .mbps = 130, .reg = 0x11 },
+ { .mbps = 140, .reg = 0x21 },
+ { .mbps = 150, .reg = 0x31 },
+ { .mbps = 160, .reg = 0x02 },
+ { .mbps = 170, .reg = 0x12 },
+ { .mbps = 180, .reg = 0x22 },
+ { .mbps = 190, .reg = 0x32 },
+ { .mbps = 205, .reg = 0x03 },
+ { .mbps = 220, .reg = 0x13 },
+ { .mbps = 235, .reg = 0x23 },
+ { .mbps = 250, .reg = 0x33 },
+ { .mbps = 275, .reg = 0x04 },
+ { .mbps = 300, .reg = 0x14 },
+ { .mbps = 325, .reg = 0x05 },
+ { .mbps = 350, .reg = 0x15 },
+ { .mbps = 400, .reg = 0x25 },
+ { .mbps = 450, .reg = 0x06 },
+ { .mbps = 500, .reg = 0x16 },
+ { .mbps = 550, .reg = 0x07 },
+ { .mbps = 600, .reg = 0x17 },
+ { .mbps = 650, .reg = 0x08 },
+ { .mbps = 700, .reg = 0x18 },
+ { .mbps = 750, .reg = 0x09 },
+ { .mbps = 800, .reg = 0x19 },
+ { .mbps = 850, .reg = 0x29 },
+ { .mbps = 900, .reg = 0x39 },
+ { .mbps = 950, .reg = 0x0A },
+ { .mbps = 1000, .reg = 0x1A },
+ { .mbps = 1050, .reg = 0x2A },
+ { .mbps = 1100, .reg = 0x3A },
+ { .mbps = 1150, .reg = 0x0B },
+ { .mbps = 1200, .reg = 0x1B },
+ { .mbps = 1250, .reg = 0x2B },
+ { .mbps = 1300, .reg = 0x3B },
+ { .mbps = 1350, .reg = 0x0C },
+ { .mbps = 1400, .reg = 0x1C },
+ { .mbps = 1450, .reg = 0x2C },
+ { .mbps = 1500, .reg = 0x3C },
+ /* guard */
+ { .mbps = 0, .reg = 0x00 },
+};
+
+/* PHY ESC Error Monitor */
+#define PHEERM_REG 0x74
+
+/* PHY Clock Lane Monitor */
+#define PHCLM_REG 0x78
+
+/* PHY Data Lane Monitor */
+#define PHDLM_REG 0x7c
+
+struct rcar_csi2_format {
+ unsigned int code;
+ unsigned int datatype;
+ unsigned int bpp;
+};
+
+static const struct rcar_csi2_format rcar_csi2_formats[] = {
+ { .code = MEDIA_BUS_FMT_RGB888_1X24, .datatype = 0x24, .bpp = 24},
+ { .code = MEDIA_BUS_FMT_UYVY8_1X16, .datatype = 0x1e, .bpp = 8 },
+ { .code = MEDIA_BUS_FMT_UYVY8_2X8, .datatype = 0x1e, .bpp = 8 },
+ { .code = MEDIA_BUS_FMT_YUYV10_2X10, .datatype = 0x1e, .bpp = 8 },
+};
+
+static const struct rcar_csi2_format *rcar_csi2_code_to_fmt(unsigned int code)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(rcar_csi2_formats); i++)
+ if (rcar_csi2_formats[i].code == code)
+ return rcar_csi2_formats + i;
+ return NULL;
+}
+
+enum rcar_csi2_pads {
+ RCAR_CSI2_SINK,
+ RCAR_CSI2_SOURCE_VC0,
+ RCAR_CSI2_SOURCE_VC1,
+ RCAR_CSI2_SOURCE_VC2,
+ RCAR_CSI2_SOURCE_VC3,
+ NR_OF_RCAR_CSI2_PAD,
+};
+
+struct rcar_csi2 {
+ struct device *dev;
+ void __iomem *base;
+
+ unsigned short lanes;
+ unsigned char lane_swap[4];
+
+ struct v4l2_subdev subdev;
+ struct media_pad pads[NR_OF_RCAR_CSI2_PAD];
+
+ struct v4l2_mbus_framefmt mf;
+
+ struct mutex lock;
+ int stream_count;
+
+ struct v4l2_async_notifier notifier;
+ struct {
+ struct v4l2_async_subdev asd;
+ struct v4l2_subdev *subdev;
+ struct fwnode_handle *fwnode;
+ unsigned int source_pad;
+ } remote;
+};
+
+static inline struct rcar_csi2 *sd_to_csi2(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct rcar_csi2, subdev);
+}
+
+static u32 rcar_csi2_read(struct rcar_csi2 *priv, unsigned int reg)
+{
+ return ioread32(priv->base + reg);
+}
+
+static void rcar_csi2_write(struct rcar_csi2 *priv, unsigned int reg, u32 data)
+{
+ iowrite32(data, priv->base + reg);
+}
+
+static void rcar_csi2_reset(struct rcar_csi2 *priv)
+{
+ rcar_csi2_write(priv, SRST_REG, SRST_SRST);
+ rcar_csi2_write(priv, SRST_REG, 0);
+}
+
+static int rcar_csi2_wait_phy_start(struct rcar_csi2 *priv)
+{
+ int timeout;
+
+ /* Wait for the clock and data lanes to enter LP-11 state. */
+ for (timeout = 100; timeout >= 0; timeout--) {
+ const u32 lane_mask = (1 << priv->lanes) - 1;
+
+ if ((rcar_csi2_read(priv, PHCLM_REG) & 1) == 1 &&
+ (rcar_csi2_read(priv, PHDLM_REG) & lane_mask) == lane_mask)
+ return 0;
+
+ msleep(20);
+ }
+
+ dev_err(priv->dev, "Timeout waiting for LP-11 state\n");
+
+ return -ETIMEDOUT;
+}
+
+static int rcar_csi2_calc_phypll(struct rcar_csi2 *priv,
+ struct v4l2_subdev *source,
+ struct v4l2_mbus_framefmt *mf,
+ u32 *phypll)
+{
+ const struct phypll_hsfreqrange *hsfreq;
+ const struct rcar_csi2_format *format;
+ struct v4l2_ext_controls ctrls;
+ struct v4l2_ext_control ctrl;
+ u64 mbps;
+ int ret;
+
+ memset(&ctrls, 0, sizeof(ctrls));
+ memset(&ctrl, 0, sizeof(ctrl));
+
+ ctrl.id = V4L2_CID_PIXEL_RATE;
+
+ ctrls.count = 1;
+ ctrls.controls = &ctrl;
+
+ ret = v4l2_g_ext_ctrls(source->ctrl_handler, &ctrls);
+ if (ret < 0) {
+ dev_err(priv->dev, "no link freq control in subdev %s\n",
+ source->name);
+ return ret;
+ }
Please use v4l2_ctrl_g_ctrl_int64 instead. v4l2_g_ext_ctrls is not intended to
be used by drivers.
+
+ format = rcar_csi2_code_to_fmt(mf->code);
+ if (!format) {
+ dev_err(priv->dev, "Unknown format: %d\n", mf->code);
+ return -EINVAL;
+ }
+
+ mbps = ctrl.value64 * format->bpp;
+ do_div(mbps, priv->lanes * 1000000);
+
+ for (hsfreq = phypll_hsfreqrange_map; hsfreq->mbps != 0; hsfreq++)
+ if (hsfreq->mbps >= mbps)
+ break;
+
+ if (!hsfreq->mbps) {
+ dev_err(priv->dev, "Unsupported PHY speed (%llu Mbps)", mbps);
+ return -ERANGE;
+ }
+
+ dev_dbg(priv->dev, "PHY HSFREQRANGE requested %llu got %u Mbps\n", mbps,
+ hsfreq->mbps);
+
+ *phypll = PHYPLL_HSFREQRANGE(hsfreq->reg);
+
+ return 0;
+}
+
+static int rcar_csi2_start(struct rcar_csi2 *priv)
+{
+ const struct rcar_csi2_format *format;
+ struct v4l2_subdev_format fmt;
+ struct media_pad *source_pad;
+ struct v4l2_subdev *source = NULL;
+ struct v4l2_mbus_framefmt *mf = &fmt.format;
+ u32 phycnt, phypll, tmp;
+ u32 vcdt = 0, vcdt2 = 0;
+ unsigned int i;
+ int ret;
+
+ source_pad =
+
media_entity_remote_pad(&priv->subdev.entity.pads[RCAR_CSI2_SINK]);
+ if (!source_pad) {
+ dev_err(priv->dev, "Could not find remote source pad\n");
+ return -ENODEV;
+ }
+
+ source = media_entity_to_v4l2_subdev(source_pad->entity);
+ if (!source) {
+ dev_err(priv->dev, "Could not find remote subdevice\n");
+ return -ENODEV;
+ }
+
+ dev_dbg(priv->dev, "Using source %s pad: %u\n", source->name,
+ source_pad->index);
+
+ fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ fmt.pad = source_pad->index;
+ ret = v4l2_subdev_call(source, pad, get_fmt, NULL, &fmt);
+ if (ret)
+ return ret;
+
+ dev_dbg(priv->dev, "Input size (%dx%d%c)\n", mf->width,
+ mf->height, mf->field == V4L2_FIELD_NONE ? 'p' : 'i');
+
+ /*
+ * Enable all Virtual Channels
+ *
+ * NOTE: I'ts not possible to get individual format for each
I'ts -> It's
+ * source virtual channel. Once this is possible in V4L2
+ * it should be used here.
+ */
+ for (i = 0; i < 4; i++) {
+
Remove empty line.
+ format = rcar_csi2_code_to_fmt(mf->code);
+ if (!format) {
+ dev_err(priv->dev, "Unsupported media bus format: %d\n",
+ mf->code);
+ return -EINVAL;
+ }
+
+ tmp = VCDT_SEL_VC(i) | VCDT_VCDTN_EN | VCDT_SEL_DTN_ON |
+ VCDT_SEL_DT(format->datatype);
+
+ /* Store in correct reg and offset */
+ if (i < 2)
+ vcdt |= tmp << ((i % 2) * 16);
+ else
+ vcdt2 |= tmp << ((i % 2) * 16);
+ }
+
+ switch (priv->lanes) {
+ case 1:
+ phycnt = PHYCNT_ENABLECLK | PHYCNT_ENABLE_0;
+ break;
+ case 2:
+ phycnt = PHYCNT_ENABLECLK | PHYCNT_ENABLE_1 | PHYCNT_ENABLE_0;
+ break;
+ case 4:
+ phycnt = PHYCNT_ENABLECLK | PHYCNT_ENABLE_3 | PHYCNT_ENABLE_2 |
+ PHYCNT_ENABLE_1 | PHYCNT_ENABLE_0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = rcar_csi2_calc_phypll(priv, source, mf, &phypll);
+ if (ret)
+ return ret;
+
+ /* Init */
+ rcar_csi2_write(priv, TREF_REG, TREF_TREF);
+ rcar_csi2_reset(priv);
+ rcar_csi2_write(priv, PHTC_REG, 0);
+
+ /* Configure */
+ rcar_csi2_write(priv, FLD_REG, FLD_FLD_NUM(2) | FLD_FLD_EN4 |
+ FLD_FLD_EN3 | FLD_FLD_EN2 | FLD_FLD_EN);
+ rcar_csi2_write(priv, VCDT_REG, vcdt);
+ rcar_csi2_write(priv, VCDT2_REG, vcdt2);
+ /* Lanes are zero indexed */
+ rcar_csi2_write(priv, LSWAP_REG,
+ LSWAP_L0SEL(priv->lane_swap[0] - 1) |
+ LSWAP_L1SEL(priv->lane_swap[1] - 1) |
+ LSWAP_L2SEL(priv->lane_swap[2] - 1) |
+ LSWAP_L3SEL(priv->lane_swap[3] - 1));
+
+ /* Start */
+ rcar_csi2_write(priv, PHYPLL_REG, phypll);
+ rcar_csi2_write(priv, PHYCNT_REG, phycnt);
+ rcar_csi2_write(priv, LINKCNT_REG, LINKCNT_MONITOR_EN |
+ LINKCNT_REG_MONI_PACT_EN | LINKCNT_ICLK_NONSTOP);
+ rcar_csi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ);
+ rcar_csi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ |
+ PHYCNT_RSTZ);
+
+ return rcar_csi2_wait_phy_start(priv);
+}
+
+static void rcar_csi2_stop(struct rcar_csi2 *priv)
+{
+ rcar_csi2_write(priv, PHYCNT_REG, 0);
+
+ rcar_csi2_reset(priv);
+}
+
+static int rcar_csi2_sd_info(struct rcar_csi2 *priv, struct v4l2_subdev **sd)
+{
+ struct media_pad *pad;
+
+ pad = media_entity_remote_pad(&priv->pads[RCAR_CSI2_SINK]);
+ if (!pad) {
+ dev_err(priv->dev, "Could not find remote pad\n");
+ return -ENODEV;
+ }
+
+ *sd = media_entity_to_v4l2_subdev(pad->entity);
+ if (!*sd) {
+ dev_err(priv->dev, "Could not find remote subdevice\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int rcar_csi2_s_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct rcar_csi2 *priv = sd_to_csi2(sd);
+ struct v4l2_subdev *nextsd;
+ int ret;
+
+ mutex_lock(&priv->lock);
+
+ ret = rcar_csi2_sd_info(priv, &nextsd);
+ if (ret)
+ goto out;
+
+ priv->stream_count += enable ? 1 : -1;
+
+ if (enable && priv->stream_count == 1) {
+ ret = rcar_csi2_start(priv);
+ if (ret)
+ goto out;
+ ret = v4l2_subdev_call(nextsd, video, s_stream, 1);
+
+ } else if (!enable && !priv->stream_count) {
+ rcar_csi2_stop(priv);
+ ret = v4l2_subdev_call(nextsd, video, s_stream, 0);
+ }
+out:
+ mutex_unlock(&priv->lock);
+
+ return ret;
+}
+
+static int rcar_csi2_s_power(struct v4l2_subdev *sd, int on)
+{
+ struct rcar_csi2 *priv = sd_to_csi2(sd);
+
+ if (on)
+ pm_runtime_get_sync(priv->dev);
+ else
+ pm_runtime_put(priv->dev);
+
+ return 0;
+}
+
+static int rcar_csi2_set_pad_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct rcar_csi2 *priv = container_of(sd, struct rcar_csi2, subdev);
+
+ if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+ priv->mf = format->format;
+
+ return 0;
+}
+
+static int rcar_csi2_get_pad_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct rcar_csi2 *priv = container_of(sd, struct rcar_csi2, subdev);
+
+ format->format = priv->mf;
+
+ return 0;
+}
+
+static const struct v4l2_subdev_video_ops rcar_csi2_video_ops = {
+ .s_stream = rcar_csi2_s_stream,
+};
+
+static const struct v4l2_subdev_core_ops rcar_csi2_subdev_core_ops = {
+ .s_power = rcar_csi2_s_power,
+};
+
+static const struct v4l2_subdev_pad_ops rcar_csi2_pad_ops = {
+ .set_fmt = rcar_csi2_set_pad_format,
+ .get_fmt = rcar_csi2_get_pad_format,
+};
+
+static const struct v4l2_subdev_ops rcar_csi2_subdev_ops = {
+ .video = &rcar_csi2_video_ops,
+ .core = &rcar_csi2_subdev_core_ops,
+ .pad = &rcar_csi2_pad_ops,
+};
+
+/*
-----------------------------------------------------------------------------
+ * Async and registered of subdevices and links
+ */
+
+#define notifier_to_priv(n) container_of(n, struct rcar_csi2, notifier)
+
+static int rcar_csi2_notify_complete(struct v4l2_async_notifier *notifier)
+{
+ struct rcar_csi2 *priv = notifier_to_priv(notifier);
+ int ret;
+
+ ret = v4l2_device_register_subdev_nodes(priv->subdev.v4l2_dev);
+ if (ret) {
+ dev_err(priv->dev, "Failed to register subdev nodes\n");
+ return ret;
+ }
+
+ return media_create_pad_link(&priv->remote.subdev->entity,
+ priv->remote.source_pad,
+ &priv->subdev.entity, 0,
+ MEDIA_LNK_FL_ENABLED |
+ MEDIA_LNK_FL_IMMUTABLE);
Shouldn't the link be created before the register subdev nodes are registered?
Usually that's done at the very end after everything else has been configured
correctly.
+}
+
+static int rcar_csi2_notify_bound(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct rcar_csi2 *priv = notifier_to_priv(notifier);
+ int ret;
+
+ v4l2_set_subdev_hostdata(subdev, priv);
+
+ ret = media_entity_pad_from_fwnode(&subdev->entity,
+ priv->remote.fwnode,
+ MEDIA_PAD_FL_SOURCE,
+ &priv->remote.source_pad);
+ if (ret) {
+ dev_err(priv->dev, "Failed to find pad for %s\n",
+ subdev->name);
+ return ret;
+ }
+
+ dev_dbg(priv->dev, "Bound %s pad: %d\n", subdev->name,
+ priv->remote.source_pad);
+ priv->remote.subdev = subdev;
+
+ return 0;
+}
+static void rcar_csi2_notify_unbind(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct rcar_csi2 *priv = notifier_to_priv(notifier);
+
+ dev_dbg(priv->dev, "Unbind %s\n", subdev->name);
+ priv->remote.subdev = NULL;
+}
+
+static int rcar_csi2_registered(struct v4l2_subdev *sd)
+{
+ struct rcar_csi2 *priv = container_of(sd, struct rcar_csi2, subdev);
+ struct v4l2_async_subdev **subdevs = NULL;
+ int ret;
+
+ subdevs = devm_kzalloc(priv->dev, sizeof(*subdevs), GFP_KERNEL);
+ if (subdevs == NULL)
+ return -ENOMEM;
+
+ subdevs[0] = &priv->remote.asd;
+
+ priv->notifier.num_subdevs = 1;
+ priv->notifier.subdevs = subdevs;
+ priv->notifier.bound = rcar_csi2_notify_bound;
+ priv->notifier.unbind = rcar_csi2_notify_unbind;
+ priv->notifier.complete = rcar_csi2_notify_complete;
+
+ ret = v4l2_async_subnotifier_register(&priv->subdev, &priv->notifier);
+ if (ret < 0) {
+ dev_err(priv->dev, "Notifier registration failed\n");
+ return ret;
+ }
+
+ return 0;
+}
Hmm, I'm trying to understand this, and I got one question. There are at least
two complete callbacks: rcar_csi2_notify_complete and the bridge driver's
complete callback. Am I right that the bridge driver's complete callback is
called as soon as this function exists (assuming this is the only subdev)?
So the bridge driver thinks it is complete when in reality this subdev may
be waiting on newly registered subdevs?
If I am right, then my question is if that is what we want. If I am wrong,
then what did I miss?
+
+static void rcar_csi2_unregistered(struct v4l2_subdev *sd)
+{
+ struct rcar_csi2 *priv = container_of(sd, struct rcar_csi2, subdev);
+
+ v4l2_async_subnotifier_unregister(&priv->notifier);
+}
+
+static const struct v4l2_subdev_internal_ops rcar_csi2_internal_ops = {
+ .registered = rcar_csi2_registered,
+ .unregistered = rcar_csi2_unregistered,
+};
+
+static int rcar_csi2_parse_dt_subdevice(struct rcar_csi2 *priv)
+{
+ struct device_node *remote, *ep;
+ struct v4l2_fwnode_endpoint v4l2_ep;
+ int ret;
+
+ ep = of_graph_get_endpoint_by_regs(priv->dev->of_node, 0, 0);
+ if (!ep) {
+ dev_err(priv->dev, "Not connected to subdevice\n");
+ return -EINVAL;
+ }
+
+ ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &v4l2_ep);
+ if (ret) {
+ dev_err(priv->dev, "Could not parse v4l2 endpoint\n");
+ of_node_put(ep);
+ return -EINVAL;
+ }
+
+ if (v4l2_ep.bus_type != V4L2_MBUS_CSI2) {
+ dev_err(priv->dev, "Unknown media bus type: 0x%x\n",
+ v4l2_ep.bus_type);
+ of_node_put(ep);
+ return -EINVAL;
+ }
+
+ priv->remote.fwnode =
+ fwnode_graph_get_remote_endpoint(of_fwnode_handle(ep));
+
+ remote = of_graph_get_remote_port_parent(ep);
+ of_node_put(ep);
+ if (!remote) {
+ dev_err(priv->dev, "No subdevice found for endpoint '%s'\n",
+ of_node_full_name(ep));
+ return -EINVAL;
+ }
+
+ priv->remote.asd.match.fwnode.fwnode = of_fwnode_handle(remote);
+ priv->remote.asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
+
+ dev_dbg(priv->dev, "Found '%s'\n", of_node_full_name(remote));
+
+ return 0;
+}
+
+/*
-----------------------------------------------------------------------------
+ * Platform Device Driver
+ */
+
+static const struct of_device_id rcar_csi2_of_table[] = {
+ { .compatible = "renesas,rcar-gen3-csi2" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, rcar_csi2_of_table);
+
+static const struct media_entity_operations rcar_csi2_entity_ops = {
+ .link_validate = v4l2_subdev_link_validate,
+};
+
+static int rcar_csi2_parse_dt_settings(struct rcar_csi2 *priv)
+{
+ struct v4l2_fwnode_endpoint v4l2_ep;
+ struct device_node *ep;
+ unsigned int i;
+ int ret;
+
+ ep = of_graph_get_endpoint_by_regs(priv->dev->of_node, 0, 0);
+ if (!ep)
+ return -EINVAL;
+
+ ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &v4l2_ep);
+ of_node_put(ep);
+ if (ret) {
+ dev_err(priv->dev, "Could not parse v4l2 endpoint\n");
+ return -EINVAL;
+ }
+
+ if (v4l2_ep.bus_type != V4L2_MBUS_CSI2) {
+ dev_err(priv->dev, "Unsupported media bus type for %s\n",
+ of_node_full_name(ep));
+ return -EINVAL;
+ }
+
+ priv->lanes = v4l2_ep.bus.mipi_csi2.num_data_lanes;
+ if (priv->lanes != 1 && priv->lanes != 2 && priv->lanes != 4) {
+ dev_err(priv->dev, "Unsupported number of data-lanes: %d\n",
+ priv->lanes);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(priv->lane_swap); i++) {
+ priv->lane_swap[i] = i < priv->lanes ?
+ v4l2_ep.bus.mipi_csi2.data_lanes[i] : i;
+
+ /* Check for valid lane number */
+ if (priv->lane_swap[i] < 1 || priv->lane_swap[i] > 4) {
+ dev_err(priv->dev, "data-lanes must be in 1-4 range\n");
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static int rcar_csi2_probe_resources(struct rcar_csi2 *priv,
+ struct platform_device *pdev)
+{
+ struct resource *mem;
+ int irq;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem)
+ return -ENODEV;
+
+ priv->base = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ return 0;
+}
+
+static int rcar_csi2_probe(struct platform_device *pdev)
+{
+ struct rcar_csi2 *priv;
+ unsigned int i;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = &pdev->dev;
+
+ mutex_init(&priv->lock);
+ priv->stream_count = 0;
+
+ ret = rcar_csi2_parse_dt_settings(priv);
+ if (ret)
+ return ret;
+
+ ret = rcar_csi2_parse_dt_subdevice(priv);
+ if (ret)
+ return ret;
+
+ ret = rcar_csi2_probe_resources(priv, pdev);
+ if (ret) {
+ dev_err(priv->dev, "Failed to get resources\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ priv->subdev.owner = THIS_MODULE;
+ priv->subdev.dev = &pdev->dev;
+ v4l2_subdev_init(&priv->subdev, &rcar_csi2_subdev_ops);
+ v4l2_set_subdevdata(&priv->subdev, &pdev->dev);
+ snprintf(priv->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s %s",
+ KBUILD_MODNAME, dev_name(&pdev->dev));
+ priv->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
+ priv->subdev.internal_ops = &rcar_csi2_internal_ops;
+
+ priv->subdev.entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
+ priv->subdev.entity.ops = &rcar_csi2_entity_ops;
+
+ priv->pads[RCAR_CSI2_SINK].flags = MEDIA_PAD_FL_SINK;
+ for (i = RCAR_CSI2_SOURCE_VC0; i < NR_OF_RCAR_CSI2_PAD; i++)
+ priv->pads[i].flags = MEDIA_PAD_FL_SOURCE;
+
+ ret = media_entity_pads_init(&priv->subdev.entity, NR_OF_RCAR_CSI2_PAD,
+ priv->pads);
+ if (ret)
+ return ret;
+
+ ret = v4l2_async_register_subdev(&priv->subdev);
+ if (ret < 0)
+ return ret;
+
+ pm_runtime_enable(&pdev->dev);
+
+ dev_info(priv->dev, "%d lanes found\n", priv->lanes);
+
+ return 0;
+}
+
+static int rcar_csi2_remove(struct platform_device *pdev)
+{
+ struct rcar_csi2 *priv = platform_get_drvdata(pdev);
+
+ v4l2_async_unregister_subdev(&priv->subdev);
+
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static struct platform_driver __refdata rcar_csi2_pdrv = {
+ .remove = rcar_csi2_remove,
+ .probe = rcar_csi2_probe,
+ .driver = {
+ .name = "rcar-csi2",
+ .of_match_table = of_match_ptr(rcar_csi2_of_table),
+ },
+};
+
+module_platform_driver(rcar_csi2_pdrv);
+
+MODULE_AUTHOR("Niklas Söderlund <niklas.soderl...@ragnatech.se>");
+MODULE_DESCRIPTION("Renesas R-Car MIPI CSI-2 receiver");
+MODULE_LICENSE("GPL v2");
Regards,
Hans
